This paper briefly introduces the major technical performances, basic design features and formation of the four-high cold strip mill.
本文简要介绍了四辊精密冷轧机的主要技术性能、设备的组成和特点。
The traditional rolling force model of 4-stand tandem cold strip mill at Anshan Iron and Steel Corporation was analyzed, and some defects were found out.
分析了鞍钢冷轧厂4机架冷连轧机轧制力模型，指出了其存在的主要缺陷，并提出了改进方案。
The test of double stepped backup rolls on 4 stand tandem cold strip mill at Anshan Iron and Steel (Group)Co. and the good results obtained are introduced.
简述鞍钢冷轧厂四机架冷连轧机采用双阶梯支承辊的试验及取得的良好成果。
This paper also describes the successful application of optimized highly adaptive backup rolls on 4 stand tandem cold strip mill at Anshan Iron and Steel (Gr…
叙述了强适应性支撑辊在鞍钢冷轧厂四机架冷连轧机上的成功应用及取得的良好效果。
This paper simply analyses the work of the exisiting backup rolls, and brings forward a project to optimize the backup rolls on 4 stand tandem cold strip mill.
在简要分析原辊型配置应用情况的基础上，提出了对四机架冷连轧机支撑辊型配置（包括辊型曲线和辊型凸度）综合优化的方案。
The severe corrosion of stainless steel fastening bolts on Electrolytic Galvanizing Line(EGL)in cold strip mill plant under current working conditions has been studied.
采用浸泡、电化学、模拟试验以及拉伸试验对冷轧厂电镀锌机组不锈钢紧固螺栓在现行工艺条件下遭受严重腐蚀进行了研究。
The paper describes the general situation of the Leveling and recoiling line, its features, elevation arrangement ect of the cold strip mill of tangshan Iron and Steel Co.
简要介绍了唐钢冷轧带钢拉矫重卷机组的总体情况、机组特点、立面布置等。
The object of the optimization system is the 4-stand tandem cold strip mill, the target function is strip gauge and shape, and the optimization method is genetic algorithms.
优化方案是以四机架冷连轧机为对象，以板形板厚为目标函数，以遗传算法为优化方法进行设计的。
On the basis of analyzing factors to influence the rolling model of tandem cold strip mill and combining rolling theory with experiment, a new rolling force model was developed.
在分析冷连轧机轧制力模型各种影响因素的基础上，通过理论推导结合现场试验建立了新的轧制力模型。
The optimization design of highly adaptive backup rolls is used on the 4 stand tandem cold strip mill. The target function is strip shape, and the optimization method is genetic algorithms.
强适应性支撑辊的优化设计是以四机架冷连轧机为对象，以板形为目标函数，以遗传算法为优化方法进行设计的。
Hydraulic AGC system is one of the key equipment for strip geometrical size control of modern tandem cold rolling mill.
液压a GC是现代宽带钢冷连轧机组几何尺寸精度控制的关键装备之一。
Flatness automatic control system is an important part of process control system of sheet or strip continuous cold rolling mill.
板形平坦度自动控制系统是板带材冷连轧机过程控制系统的重要组成部分。
This article mainly introduces the design of coiler driving for aluminium strip non-reversing cold rolling mill, and the mechanical gear shift has been application to this driving design.
介绍了铝带不可逆冷轧机卷取传动设计的一般方法，以及机械换档方法在传动设计中的应用。
The article describes the function, process and component of hot strip skin pass mill and makes comparison with cold strip skin pass mill.
介绍热带钢平整的作用、工艺及设备组成，并与冷带钢平整设备做比较。
The shape meter is a detecting system fixed on the cold rolling strip mill which detects the strip shape to control product quality of strip and improve economic benefit.
板形仪是安装在冷轧带材轧机上的检测系统，用于检测带材板形，以控制成品带材的质量，提高经济效益。
This paper introduces the digital combined constant tension control system applicated on the high performance cold reversing mill of the third cold rolling strip plant of Shanghai.
本文介绍用于上海第三冷轧带钢厂高精度可逆冷轧机上的数字化复合恒张力控制系统。
In this paper, we introduce methods of shape control and application of shape control in cold and hot strip mill.
本文介绍国外有关板形控制的方法及在冷、热板轧机上的应用。
Mainly introduce the strip catenary control system of the Cold Rolling Mill Plant.
主要对冷轧退火涂层机组中的带钢垂度控制系统进行了介绍。
The quality of cold rolled strip was improved according to the new rolling schedule which was optimized, and the rolling efficiency of the mill was increased.
按新轧制规程生产的冷连轧成品带钢质量获得改善，并提高了轧机的轧制效能。
An application to the compensation of the periodical thickness variation of the strip produced by eccentricities in a cold mill rolling is presented.
本文介绍了它的计算方法，及其在轧钢机中由轧辊偏心引起的变化信号补偿中的应用。
Asynchronous one-stand-tandem mill (ACSTV) is a new type rolling mill, which allows to accomplish several rolling passes on one stand and can produce thin cold strip.
异步单机连轧机是一种可以在一台轧机上进行多道连轧、生产冷轧薄金属带的新型轧机。
In the cold rolling mill, coil open-book will open the machine, and then strip the introduction of a rolling mill stand even with volumes thin.
在冷轧机上，开卷机将钢卷打开，然后将钢带引入五机架连轧机轧成薄带卷。
This paper expounds the shape classification of strip, analyzes the reasons why the shape wave occurs on the band steel in the cold rolling mill, and probes into the crown control of the band steel.
叙述了带钢的板形分类，分析了在冷轧厂生产中带钢板产生浪形的原因，探讨了带钢的凸度控制。
Roll eccentricity is a problem not to be ignored for strip gauge control in high accuracy cold rolling mill.
轧辊偏心是高精度冷轧机厚度控制不能忽视的问题。
The influencing factor of the temper mill on the quality of cold rolled strip is introduced. Measures to improve the quality of cold rolled strip is proposed in light of Masteel 1575 temper mill.
介绍了平整机组对冷轧板带质量的影响因素，并结合马钢1575平整机组，提出了平整机组提高冷轧板带质量的措施。
The main process characteristics of cold rolled strip mill train imported for supporting construction are introduced.
引进配套建设的冷轧板带机组的主要工艺技术特点。
Speed control system of skin pass mill in Cold Strip Rolling Mill of Wuhan Iron & Steel Group Company is introduced.
介绍武钢冷轧厂平整机的速度控制系统。
Speed control system of skin pass mill in Cold Strip Rolling Mill of Wuhan Iron & Steel Group Company is introduced.
介绍武钢冷轧厂平整机的速度控制系统。
应用推荐