The operators work by comparing each individual element of the two participating tuples from left to right (see Listing 6).
这些运算符的工作原理是从左到右地比较两个参与元组的每个单独的元素(请参见清单6)。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较,取得了较好的一致,验证了有限元分析的正确性和可行性。
Comparing with finite element method, MWR has some advantages, such as simpler computer program, less input data and less computer storage requirements etc.
而本法与有限元法比较,具有程序简单,输入的原始数据少,内存需要量少等优点。
RSD and RD of each element is good by checking and comparing to experiments.
考核及对照分析实验表明,各元素的RSD及相对偏差良好。
The BEM technique for adhesive-bonded structure proves valid by comparing the stress distribution for double lap joint calculated in this paper with that calculated by finite element method.
对双搭接接头进行了边界元应力分析,并和有限元结果进行了对比,从而证实本文方法的有效性。
Through comparing the curvature modes of real structure with finite element model, a damage factor was gained. Based on analyzing the damage factor, damage location can be identified.
通过有限元模型和实际结构的曲率模态计算得到结构损伤因子,通过分析该损伤因子,可以判断实际结构的损伤位置。
Just comparing the composition of osmium in one of the planet host stars, we want to understand why there is so much of this element.
只要比较锇的成份,在行星的宿主恒星中。我们想了解,为什么有那么多的这种元素存在。
A method combining indentation test with finite element simulation is proposed to obtain the ductile parameters of KDP crystal by comparing indentation depth with finite element simulation depth.
提出了压痕实验与有限元仿真结合的方法。它采用压痕深度与有限元仿真深度进行对比,可求解出KDP晶体的塑性特性参数。
The temperature distribution and stress distribution of blast furnace tuyere with gradient coating have been studied using finite element analysis software, comparing with uniform coating.
采用有限元分析软件研究了梯度涂层高炉风口的温度分布和应力分布,并与均匀涂层进行了比较。
The feasibility and the credibility of this system are proved, by using this system to a case and comparing the finite element analysis results and the theoretical results of the case.
通过将该系统应用于某工程实例,并将该实例的理论计算门架静刚度值与有限元分析值进行比较,验证了该系统的可行性和计算结果的可参考性。
Establishing a practical construction model by using the automatic choice parameter dynamic relaxation, Then comparing the result with the result by using nonlinear finite element.
将自选参数动力松弛法在工程实例中建模运用,并与非线性有限元找形方法的结果比较。
The system model method is validated by comparing the frequencies with those obtained from finite element analysis method.
并用有限元分析方法进行了验证,比较了两种方法的差别。
The first part of the dissertation is the finite element comparing of hull structure.
本文第一部分为船体结构的有限元比较分析。
The finite element model was established first, then the modal analysis was processed, and accuracy of the model was verified by comparing the theoretical solution with the numerical solution.
文中首先建立了拉索的有限元模型,对该模型进行了模态分析,并通过理论解的计算验证了数值模型的准确性。
The simplified formulae for curvature and moment in slab are derived and validated by comparing with the finite element solutions.
通过与有限元结果对比,验证了简化公式的准确性。
It indicates that finite element simulation is feasible and exact through comparing between simulation result and test result.
通过计算值与试验结果的对比证明,有限元模拟具有一定的可行性和准确性。
Comparing with the classic finite element method, WPIM belongs to a half analytical method, it is not sensitive to the time step, so this is helpful to improve the computational efficient.
与传统的有限元方法相比,本文方法属于半解析方法,对时间步长不敏感,可有效提高计算效率。
The designed software makes data processing simple, visual, easy-to-use and helpful in comparing and analyzing each element of the processed results. The methods have practical value.
软件的设计使得数据处理的过程变得简捷、可视化、易操作,同时有助于分析比较每个环节的处理结果,具有较强的实用价值。
Comparing with the results of the experimental results and the finite element model, the effectiveness of the formula is verified and the influence degree of each affecting factor is analyzed.
结合试验和有限元分析对公式的有效性进行验证,并分析各影响因素的影响程度。
So we can figure out the chemical make up of the other stars by comparing this spectrum pattern it has to the pattern of the element in the libraries.
所以我们可以我们可以通过以库中的光谱样式和它们有的光谱样式来进行对比从而估算出别的行星的化学成分。
By comparing the results of finite element with domestic code, the paper also provides Suggestions for further revising of the code.
将有限元计算结果与国内规范进行了比较,为规范的进一步修订提供了参考建议。
It is concluded that the performance of large-scale connector is superior to what of the peg-connector by comparing large-scale connector with peg-connector with finite element analysis.
最后通过有限元分析对栓钉连接件与大型剪切连接件进行比较分析,结果表明,大型剪切连接件的各方面性能均优于普通栓钉连接件。
A numerical example was given to demonstrate the accuracy and efficiency by comparing the results with finite element method.
通过算例分析并与有限元计算结果相比较,验证了该方法的计算精度和计算效率。
Comparing experimental data and the results of finite element method, it is showed that the deflection of foam core sandwich beam by these methods could be accurately predicted.
通过对比试验数据以及有限元的计算结果,得到用该方法可较为准确地预测泡沫夹层结构梁的挠度。
By comparing them, the good quality of finite element method (FEM) was showed, which it is widely flexible and convenient to get the stress and strain anywhere in the tank.
两者相比较,突出了有限元方法的优点,即适应性强,便于得出罐体任意位置的应力和应变。
By comparing the finite element analysis results including phenomena with the tests, it shows good agreements between them.
通过有限元分析得到的现象和数据处理与试验吻合较好。
By comparing the finite element analysis results including phenomena with the tests, it shows good agreements between them.
通过有限元分析得到的现象和数据处理与试验吻合较好。
应用推荐