The script USES WLAN tools and utilities to configure device driver parameters like WEP keys and SSIDs.
这个脚本使用WLAN工具和实用程序来配置设备驱动程序参数，例如WEP关键字和SSID。
Device Configuration Assistant, or shortly DCA, is used to add, remove and configure device drivers necessary to boot a machine up.
设备配置助手，简写为DCA，用来增加、删除和配置必要的设备驱动来引导一台机器。
When first setting up your systems, start from the bottom (the physical layer) as you configure your disk, the device layer, its logical volumes, file systems, and the files and application.
在第一次设置系统时，对于磁盘的配置，可以从最底层(物理层)开始，然后是设备层、逻辑卷、文件系统、文件和应用程序。
Configure DMMP to support the storage device.
配置DMMP，使之支持存储设备。
As with any search project, our faceted navigation demo requires that we define content sources and configure a crawler or other device to ingest and index them.
对于任何搜索项目，分面导航演示都要求定义内容源，配置收集这些内容源并为它们建立索引的信息收集器或其他设备。
The SCSI commands involve data commands that are used for transferring data from or to SCSI devices and non-data commands that request or set the configure parameters of a SCSI device.
SCSI命令涉及到用于向 SCSI设备传输数据（或从中输出数据）的数据命令，以及用于设置 SCSI 设备的配置参数的非数据命令。
Configure and ensure the boot list is pointing to the standby BOS as the first boot device, as shown in Listing 17.
配置并保证启动列表将备用BOS作为第一启动设备，如清单17所示。
If an IP was accidentally configured on this physical interface and it was part of a SEA configuration, the SEA may fail to configure as the physical device is already in use.
如果在这个物理接口上配置了IP，而且它属于SEA配置，SEA的配置就可能失败，因为这个物理设备已经在使用了。
There are a number of ways to configure MQ in order to send messages to a device queue manager.
为了将消息发送到设备队列管理器，有许多配置MQ的方式。
The global options set the use of UDP, the UDP port, and configure the name of the virtual device that will be created.
全局选项设置使用UDP、udp端口，并配置将要创建的虚拟设备的名称。
Users require administrator access and a working knowledge of how to configure MDS class switches through the Device Manager GUI.
用户需要具有管理员访问权限并且具有如何通过DeviceManagerGUI 来配置MDS类交换机的应用知识。
Connect, configure, and verify operation status of a device interface.
连接，配置并检查设备接口的工作状态。
We'll go through the steps to configure a DataPower device to do this.
为此，我们要完成配置DataPower设备的步骤才能执行此操作。
If you want to configure the X Window System for your analog device, you need to install and run the Xautoconfig package like this.
如果您希望为自己的模拟设备配置XWindowSystem，就需要按照下面的方式来安装并运行xautoconfig包。
I recommend that you configure your Linux system to always use a swap device.
我建议您将自己的Linux系统配置为总是使用交换设备。
In this article, you learned how to configure a DataPower device to act as a domain gateway from both a client and service provider perspective.
在本文中，您学习了如何从客户端和服务提供者透视图配置DataPower设备，使其充当域网关。
You might then have to configure the Bluetooth chipset on the Linux device to receive and send SCO audio packets over the HCI transport interface rather than the PCM interface.
然后，您可能不得不在Linux设备上配置Bluetooth芯片组，以通过HCI传输接口而不是P CM接口收发sco音频数据分组。
Two Linux projects define a generic WLAN API and provide tools to let user-space applications configure parameters and access information from WLAN device drivers.
有两个Linux项目定义一般的WLANAPI，并且提供工具让用户空间应用程序配置参数和存取来自WLAN设备驱动程序的信息。
Create a portlet project and configure it with a device layout.
创建Portlet项目，并通过设备布局配置它。
In this article, we'll go through the steps to configure a DataPower device to perform that translation.
在本文中，我们将介绍配置DataPower设备的步骤，以执行该转换。
Or, if you have the wrong set of device drivers installed, running devfsadm might not configure that Fibre Channel adapter you're trying to set up.
如果安装的设备驱动程序设置出错，那么运行devfsadm或许无法配置您想要安装的FibreChannel适配器。
If you're building an embedded device that has very specific needs, you can manually configure the contents of your BusyBox with the menuconfig make target.
如果您正在构建一个具有特殊需求的嵌入式设备，那就可以手工使用menuconfig make目标来配置BusyBox的内容。
For example, it's actually quite easy to configure a device, like the Ambient Orb, to change colors if code complexity increases or even if a certain number of coding standards are violated.
例如，实际上可以很容易地配置一个设备(就像Ambient Or b)，在代码复杂度有所上升时，或者在违反一定数量的代码标准时，使用该设备改变颜色。
After the disk is allocated, the WPAR administrator runs the CFGMGR command to configure the device in the WPAR environment (this must be done for any device added after the WPAR is created).
分配磁盘之后，WPAR管理员运行cfgmgr命令在WPAR环境中配置设备(必须为创建WPAR之后添加的所有设备执行这个步骤)。
To configure Tivoli Access Manager integration with the DataPower device, only a few steps need to be done.
要配置TivoliAccessManager与DataPower设备的集成，只需几个步骤即可完成。
You must install and configure at least one device.
您必须最少安装并配置一个设备。
Incidentally, your measurement system is determined by how you configure your DAQ device.
顺便说一句，测量系统取决于用户如何配置DAQ设备。
Actually, when you configure a disk as a common paging space device the no_reserve attribute will automatically be set no.
实际上，在把磁盘配置为共用分页空间设备时，保留策略属性会自动地设置为no_reserve。
USB Disk Authentication - Configure a USB device to act as a "key" to view encrypted information (it must be plugged into the system for access).
盘认证-配置一个USB设备作为一个“钥匙”来查看加密的信息(必须作准入制度堵塞)。
When you configure a particular DAQ device for a particular measurement system type, all your input channels will follow that measurement type.
在一些特殊类型测量系统中用户必须根据测量类型配置该DAQ设备的输入通道。
应用推荐