Which Hangzhou family company can do an exhibition design fabrication?
杭州哪家公司可以做展位设计制作？
Recent advances in the design and fabrication of gradient index (GRIN) optics promises to make this possible, and the implications will be far-reaching.
最近梯度折射(GRIN)光学器件的设计制造有望使这一切成为可能，而且影响深远。
Thales Australia will be undertaking design and fabrication work at its Garden Island facility in Sydney before installing the equipment on the AWDs at Techport Australia in Adelaide.
澳大利亚Thales公司将悉尼GardenIsland工厂进行设计和制造工作，然后在Adelaide完成防空驱逐舰的安装工作。
It now employs 50, 000 toolmakers, including a team of 2, 000-plus workers who focus on the design and fabrication of molds and dies.
它现在雇佣了5000名工具制造工人，包括一个专注于模具设计和制造的2000人团队。
In addition, providing the tools for manufacturable GRIN optics will expand the reach of GRIN lens design and fabrication methods beyond current optics application space.
此外，M -GRIN将使GRIN透镜的设计制造超越现有的光学应用范围。
Predating CAD, this geometric linear- and arc-based approach evolved out of the mental constructs of design technique, industrial fabrication, and reproduction of the objects of the 20th Century.
由我们心中所想衍生出的，几何化的直线、曲线为基础的早期CAD，决定了整个20世纪的设计技术，工业生产和物品的复制和再生产。
Design and fabrication of polarizing beam splitter for projection display system.
应用于投影显示系统的偏振分光镜的设计和制备。
Knowledge of optic and optic mount design, analysis, drawings and fabrication.
拥有光学及光学设计，分析，绘图和装配知识。
once the company is happy with the design of a wafer fabrication plant, it will “copy it exactly” in its other locations, says Professor Hargadon, “down to the paint on the wall.
一旦公司对某家晶圆生产工厂的设计表示满意，它就在另一个地点“照样复制”，哈格顿教授说，“一直具体到墙壁的涂料”。
Design and fabrication of auricular prostheses based on rapid prototype technology.
基于快速成型技术的人耳赝复体的设计与制造。
Assists with in-house design and fabrication of equipment.
协助与内部设计和设备制造的。
Good understanding of mechanical design and fabrication process.
对机械设计和制造流程有透彻的了解。
The design, fabrication and application of a versatile adjustable welding fixture is introduced in this paper.
介绍了通用、可调式焊接夹具的设计制造及其应用。
The results are helpful to the design, fabrication and application of the micro flapping actuator.
所得研究结论对微扑翼驱动机构的设计、制作和应用提供了一定的理论依据。
Vendor shall be responsible for making all aspects of materials, design, fabrication, inspection and testing conform to the requirements of the specified codes, standards and local regulations.
卖方负责根据指定的规范、标准和地方规章的要求提供材料、设计、制作、检测及试验。
Monitoring of equipment design and fabrication work.
跟踪及监督设备设计和制造过程。
This section sets out the design, fabrication, supply, deliver, installation, test and commission of the gas distribution system.
这一部分先容了气体管路的设计、材质、运输、安装、检验等方面的内容。
The design, fabrication and testing results are described for a prototype collector based on this concept.
本文描述了基于这一概念的一台集热器样机的设计、制作和测试结果。
The organization shall provide resources for tool and gauge design, fabrication and verification activities.
组织应为工具和量具的设计制造和验证活动提供资源。
Design, fabrication and test results of DC-contact Cantilever RF MEMS Series Switches are reported.
报道了悬臂梁接触式RFMEMS开关的设计、制作和测试结果。
After cause analysis of the pipe deformation inside cold box, some corresponding precaution measures are proposed from the aspects of design, fabrication and operation of air separation unit.
文章详细分析了空分设备冷箱内管道变形的原因，从空分设备的设计制造和操作方面，提出了相应的防范措施。
The causes of failure and protection measures taken in the design, fabrication and operation of carbonation water tank were discussed.
介绍了碳化水箱损坏的原因及在设计、制造和使用过程中采取的防护措施。
The measurement principle, design, fabrication and experimental results of a novel infrared thermometer sensor are presented in this paper.
本文介绍了一种新型红外温度传感器的测量原理、设计制作和实验结果。
At last, evaluation factor of distributed SPR sensor was presented, which will be helpful to the design, fabrication and evaluation of distributed SPR sensor.
最后，提出了SPR分布式传感器的评价因子，为今后的分布式SPR传感器设计、制作和性能评价提供了有益的参考。
This paper describes the design, fabrication and experimental results of Bragg deflectors using acoustooptic interaction of GOW and SAW.
本文介绍利用光导波与声表面波互作用的布喇格偏转器的设计、制作和实验结果。
The design, fabrication and the preliminary testing of this sensor is introduced, besides the structural protection for these low-range sensors in the situation of over-loading is mainly described.
除了主要介绍微加速度计阵列的设计、制造和测试外，还着重介绍了低量程传感器在高过载环境下的结构防护问题。
Optimizing opinion and quality control measure of design, fabrication and assemble were proposed for joint of light steel structure in present paper.
本文对轻钢结构节点设计、制作安装提出了优化意见和质量控制措施。
The problems of the quality of initiating explosive devices are explored regarding the product design, fabrication, inspection and acceptance as well as to the user.
讨论了从产品设计、制造、检验验收、交付使用等各个环节确保产品质量的问题。
The design, fabrication and properties of the ytterbium-erbium co-doped double-cladding fiber are reported, which is made by method of a combination of the MCVD and solution doping technique.
文中主要介绍了用MCVD工艺结合溶液掺杂技术制备铒镱共掺双包层光纤的设计、制作及性能。
The design, fabrication and properties of the ytterbium-erbium co-doped double-cladding fiber are reported, which is made by method of a combination of the MCVD and solution doping technique.
文中主要介绍了用MCVD工艺结合溶液掺杂技术制备铒镱共掺双包层光纤的设计、制作及性能。
应用推荐