It is important to provide the beneficial reference and the flow field characteristic research for structural design on hydrocyclones.
该课题的研究将为复合式旋流器的结构设计和流场特性分析提供有益的参考。
It is valuable for CFB desulfurization reactor design optimization to study the gas-solid flow field characteristic in CFB riser.
研究流化床提升管内气固流场分布情况对设计和优化循环流化床脱硫器有重要意义。
The flow field surrounding the revolving object, pressure and resistance distribution on its wall were calculated in order to design a micro-bubble reducing resistance scheme for the revolving object.
通过数值计算方法，模拟回转体在水下的航行，分析回转体周围流场、压强及其壁面上阻力的分布，并根据计算结果为该回转体设计了有效的微气泡减阻方案。
It is useful in understanding nozzle internal and external flow field and impinging jet parameter distribution. It is also helpful for optimal design of nozzle internal structure.
计算结果与实验吻合较好，所获得的喷嘴内外部流场的流动状况以及冲击射流参数分布，可用于优化喷嘴内部结构设计。
The study on flow field in front and at back of a Francis turbine runner is very important for the runner in its hydraulic design and characteristic improvement.
混流式水轮机转轮前后的流场研究对于转轮水力设计，改善其性能有着重要意义。
It is valuable for CFB desulfurizer design optimization to study the gas-solid flow field characteristic in CFB riser.
研究流化床提升管内气固流场分布情况对设计和优化循环流化床脱硫器有着重要价值。
This design system is suitable for the high speed ship with oblique flow and fat ship with the highly non-uniform flow field, and it is very valuable in the practical application.
本设计系统适用于船尾流场为斜流的高速船和船尾流场及不均匀的肥大船，具有极高的实用价值。
For researching on disc separator's inner flow field, the numerical method was an important means to optimize the design.
碟式分离机的内部流场进行研究，数值计算方法是优化设计的重要手段。
A complicated turbulent flow field in a diffuser with typical geometric shape for aeroengine inlet design was calculated by the use of the implicit AF method.
应用隐式AF方法计算了为发动机进气道设计的典型扩压器内的复杂湍流流场。
The numerical simulation of steam flow field and heat transfer in condenser is necessary for the design, modification and operation of condenser.
详细地模拟凝汽器壳侧汽相流动和传热过程，对于凝汽器的设计、改造和运行具有重要的指导作用。
Based on the numerical results, the internal flow field was analyzed with the emphasis on flow loss. The analysis is very valuable for torque converter design.
基于计算结果，从流场损失的角度对变矩器内流场进行了细致的分析，为提高变矩器设计水平提供了有力的理论依据。
Presents the demands for indoor environment of the injection workshop, air conditioning design and energy saving design. Analyses the flow field with the method of CFD numerical simulation.
介绍了该输液车间室内环境要求、空调工程设计及空调系统的节能情况，利用CFD数值模拟方法对流场进行了预测分析。
The simulation of flow field and temperature field for the casting in CAE system are carried out in order to check and optimize processing design.
在CAE系统中，对铸件进行流场和温度场的模拟，以便校核和优化工艺设计。
But the design of impeller lie on flow-field of the inner of impeller, so the first step for improving performance of pump is to completely study the rule of flowing in the impeller.
而叶轮的设计则取决于叶轮内部介质的流动规律，因而搞清叶轮内的流动规律是设计高性能污水渣浆泵的前提。
The control mechanism based on ventricular work is proposed to design for the controller adaptable to axial-flow blood pump driven by extracorporeal magnetic field.
文章提出了基于心室功的控制机制，设计了适合外磁驱动轴流式血泵结构特点的控制器。
Through the study for the full 3-d flow field of LP casing under all conditions, the internal flowing mechanism of the turbine shall be known clearly to optimize the design of air cooling units.
通过分析研究低压缸全工况三维流场，可深入了解透平内部流动机理，有助于进一步优化空冷机组设计。
The object of measuring velocity distribution is to show the characteristics of turbulent flow velocity field in recoil mechanism, so as to make some Suggestions for the design of recoil mechanism.
测试驻退机湍流速度场的目的是逐步揭示驻退机内湍流流场的结构和特点，为驻退机的设计和改进提供一些有益的参考。
In this paper the flow field in swirler is measured by five-hole probe, hotwire and LDA. These results could be much the same. It can provide some ideas for design of swirler.
叙述了分别采用五孔探针、热线和激光三种流场测量方法测量旋流器模型内的流场分布情况，并得出基本一致的实验结果，从而为旋流发生器的设计提供理论依据。
Temperature and flow field inner the nacelle are calculated and analyzed, the results and conclusion could be used as reference for design of wind turbine nacelle.
通过分析给定热源条件下的机舱内温度场，为加热器位置的布置、机舱内零部件保温提供参考。
Temperature and flow field inner the nacelle are calculated and analyzed, the results and conclusion could be used as reference for design of wind turbine nacelle.
通过分析给定热源条件下的机舱内温度场，为加热器位置的布置、机舱内零部件保温提供参考。
应用推荐