This thesis expounds the design of injection mould plastic.
论述塑料制品的注塑模设计。
This thesis deals with the design of injection mould of plastic.
论述塑料制品的注塑模设计。
The applications and mould design of injection mould computer aided engineering(CAE) are introduced.
着重介绍了注塑模具计算机辅助制造（CAE）的应用和模具设计。
The design of injection mould for soap box Mcam software design, use of plastic parts of the entity model, plastic process analysis.
本设计对肥皂盒进行的注塑模设计，利用Mcam软件对塑件进行了实体造型，对塑件结构进行了工艺分析。
The mould structure was proved to be reasonable and reliable by practice, being valuable for the design of injection mould for similar parts.
经生产验证，该模具结构设计合理、可靠，对类似产品的注射模设计有很好的参考价值。
At last an example of enunciator crust design is given to present the basic flow and method of the intelligent design of injection mould feed system.
最后以报警器壳体塑件为例，给出了应用开发的智能化设计系统进行注塑模具浇注系统设计的基本流程与方法。
This topic through to the design of injection mould soap box, consolidate and deepen the knowledge obtained satisfactory effect, achieve the expected design intent.
本课题通过对肥皂盒的注射模具设计，巩固和深化了所学知识，取得了比较满意的效果，达到了预期的设计意图。
Injection mould feed system is an important component of the structure design of injection mould, and is also the only channel for molten plastic flowing into mold cavity.
浇注系统是注塑模具结构设计中的一个重要组成部分，也是塑料熔体进入模具型腔的唯一通道。
The design process of plastic wye injection mould is stated in detail from the analysis of plastic part , the analysis of the process and the design of the struction.
从塑件分析、工艺分析、结构设计三方面详细阐述了常见塑料三通注射模的设计过程。
Structure design, mould design and manufacturing, injection forming and second processing of thin lens are introduced.
介绍薄型透明片的结构设计及模具设计制造、注射成型、二次加工。
Through the technology analysis of the complicated constitution of plug jacket, the injection mould structure and the working process were determined. The design characteristic was introduced as well.
通过对插接护套复杂结构的工艺分析，确定了该类制件的注射模结构、工作过程，并对其设计特点进行了介绍。
By using the principle of reliability design, the withdrwal core mechanism with bevel lead column in plastic injection mould is analyzed.
运用可靠性设计原理， 对塑料注射模常用的斜导柱式抽芯机构进行分析。
Over detail analysis of mould structure working process and disassemble dies process an injection mould design method of solving this kind of plastic parts is introduced.
通过对模具结构、模具工作过程、卸模过程的详细分析，介绍了一种解决此类塑料件注射模的设计方法。
The structure characteristics of inverse jaw bottle lid were analyzed, and the design point and work procedure of injection mould for inverse lid were introduced.
分析反口盖的结构特点，介绍反口盖注射成型模具设计的要点及模具的工作过程。
Present article discussed the design and working mechanism of the insertion in the horizontal injection mould.
本文论述卧式塑料注射模中非刚性嵌件安放机构的设计及工作实现原理。
It introduces the mould structure and working principle of the injection mould with inside pattern drawing from three directions for core. Point out the design gists of the mould.
介绍三面内抽芯盒盖注射模的模具结构及工作原理，并指出了该模具的设计要点。
Based on the idea of function design, an architecture of the assembly design system for injection mould in concurrent and collaborative environment was presented using top down pattern.
根据功能设计的思想，采用自顶向下模式，给出一个并行协同环境下注塑模具装配设计系统的框架，对功能至产品演化过程中的数据模型进行了分析。
The technological characteristics of back cap of digital camera were analyzed, and the structural design and operating process of the injection mould were introduced.
分析了数码相机后盖塑料件的工艺特点，介绍了数码相机后盖注射模结构设计和工作过程。
Based on the analysis of the structure characteristics of wave wheel of washing machine and the mould design project, an injection mould for this part was designed.
通过对洗衣机波轮轴承的结构特点与模具设计方案的分析，介绍了洗衣机波轮轴承注塑模的结构与工作过程。
Nowadays, popularizing and applying CAD/CAM technology is an advanced subject. This paper emphatically introduces injection mould design of flagpole coor and CAD/CAM process of its mould parts.
推广应用CAD/CAM技术是当今先进的研究课题。本文着重介绍插旗杆座的注塑模设计及模具零件的CAD/CAM过程。
The general design principle of gas-assisted injection mould design is discussed. The working principle and selection method of gas pins are introduced.
阐述了气体辅助注射模具设计的一般原则，介绍了气针的工作原理和选择方法。
Aiming at the new design of handle injection mould, the author expatiated the structural form of handle injection mould and analyzed the design of mould slanting tip core machine.
针对把手注射模的新设计，阐述了把手注射模的结构形式，并重点分析了模具斜顶抽芯机构的设计。
It analyzes the basic structure of the double-deck injection mould, describes how to design the temperature control system and mechanism for mould opening. The paper shows an example.
首先分析了叠式模具的基本结构，然后阐述了温控系统、开模机构的设计与选择，最后给出一个具体的设计实例。
With the design of the injection mould for the top shell as an example, the whole process of the computer_aided design of the injection mould for based on MDT parameterized solid modeling was stated.
以上壳注射模设计为例，介绍了基于MDT参数化实体造型的上壳注射模计算机辅助设计的全过程。
The processing property of the grid part was analyzed. The scheme and main of the design of the injection mould for grid was introduced. Design calculating was done for the feed system.
分析了栅板零件的工艺性，介绍了栅板注射模的设计方案及设计要点，并对浇注系统的设计计算作了较详细的阐述。
Through the analysis of the structure of the deep_cavity plastic part, the causes of some problems often fallen across in the design of the injection mould were found out.
对中性笔笔帽塑件进行了分析，确定了模具结构，阐述了深腔强脱塑件模具的设计注意要点，对同类注射模具有较好的参考价值。
This paper introduced the CAE for injection molding, discussed the methods to optimize manufacturing technology and parameter of mould design with computer.
本文介绍了注塑模具CAE，论述了用计算机优化制造工艺和模具设计参数的方法。
The injection mould design of pressure head is introduced, and the points of design are also elaborated.
对押头注塑模设计的实例介绍，详细阐述了其中的设计要点。
The injection mould design of pressure head is introduced, and the points of design are also elaborated.
对押头注塑模设计的实例介绍，详细阐述了其中的设计要点。
应用推荐