On the basis of discussing the reliability theory by total distributed control systems, it puts forward the reliability design of series hardware circuit.
在简要论述集散型控制系统可靠性理论的基础上，提出放大器硬件电路的可靠性设计。
In the design, to produce circuit TL494 as a PWM output control signals, control of the on-switch situation, the half-bridge flyback output on the basis of the power of multi-output.
在设计中，以TL 494作为PWM产生电路输出控制信号，控制开关管的导通状况，在半桥反激式输出的基础上实现了电源的多路输出。
On this basis the design of the filling machine using electrical control circuit, it is particularly suitable for explosion-proof requirements in the environment.
在此基础上设计的灌装机采用电气控制回路，因此特别适合在对于有防爆要求的环境中使用。
Physical realization of the cranes modern intelligent electronic anti-sway control system must be based on the modern design of electronic circuit.
起重机现代智能电子吊重防摇控制系统的物理实现须建立在现代电子电路设计基础上。
The design of a novel high frequency fluorescent lamp IC, on which low voltage control circuit and high voltage power device encapsulated in one chip, is introduced.
本文介绍了一种高频荧光灯镇流器芯片的设计，在芯片的实现上充分体现了低压控制电路与高压功率器件在单一芯片上的兼容性。
This paper introduce design method and work principle on the application of SCM to aircraft gun projecting control, and provide hardware circuit and software design process.
本文主要介绍了单片机在航炮射弹控制中的设计方法和工作原理，给出了硬件电路和软件设计过程。
On the hardware of the system, parts of control circuit and the design and debugging of peripheral circuits are discussed thoroughly.
硬件方面主要论述了控制电路各部分及外围辅助电路的设计和调试。
Based on SG3525A PWM control circuit and the study, based on the design of the hardware structure of wire.
本文在对PWM控制电路及SG3525A的研究基础上，设计的送丝硬件结构。
Then on the basis of two platforms we give the hardware design of the "three-loop" control circuit and control algorithm flow.
然后在这两个平台的基础上，给出了“三环”控制电路的硬件设计和控制算法实现流程。
Details on the design of inverter circuit structure, the realization of driving circuit, the method for the generation of SPWM signal and the specific control of MCU was introduced.
详细介绍了逆变电路结构、驱动电路的具体设计、SPWM信号产生方法及单片机如何实现控制等。
The process of the design of the brushless torque motor control circuit based on the MSK4364 is introduced.
介绍基于MSK4364型驱动器的某型无刷力矩电机驱动电路的设计过程。
Logical control circuit design: this part includes the design of DFF, non-overlap clock generate and so on.
逻辑控制电路设计：D触发器、不重叠时钟脉冲发生器等模块的设计。
This paper introduces the design and implementation of ventilator control system based on FPGA including principle and electric circuit.
本文详细介绍了基于FPGA的呼吸机控制系统的设计和实现，包括原理和电路结构图。
This paper introduces in detail the design and implementation of ventilator SPONT control chip based on FPGA, including principle and electric circuit.
本文详细介绍了基于F PGA的呼吸机SPONT 模式控制芯片的设计和实现，包括原理和电路结构图。
DC constant current power supply circuit based on current closed-loop feedback control is brought (forward) in this paper and how to design the circuit is also emphatically introduced.
开发了一种基于电流闭环反馈控制的数控直流恒流源，介绍了该电路的设计思路。
In this paper, on the PWM control circuit and SG3525A research, based on the design of the hardware structure of wire feeding.
本文在对PWM控制电路及SG3525A的研究基础上，设计的送丝硬件结构。
First, the scheme selection of the system was introduced in this paper. On this basis, the detailed description of the design of mechanical structure and control circuit were given.
本文首先描述了本系统的方案选择，在此基础上详述了该系统的机械结构设计和控制电路设计。
Set up the circuit design criterion for the steady - stage deadbeat control to the line current of a three - phase high-power-factor rectifier based on voltage space-vector PWM.
建立了对基于电压空间矢量pwm的三相高功率因数整流器实现电流稳态无差拍控制的设计准则。
Objective By the research on the operating table control circuit, we hope to design a reliable, power saving and widely used one.
目的通过对手术床控制电路的研究，设计一种应用广泛、可靠性高且待机无功耗的手术床控制电路。
Electromagnetic induction heating circuit design includes power circuit, control circuit, oscillations and driving circuit modules expounded on the circuit design.
电磁感应加热电路设计包括功率电路、控制电路、振荡和驱动电路等单元，阐述系统的电路设计。
The design of single-chip computer with wireless control electronic circuit, which is based on experiment, has achieved the desired results.
在实验的基础上设计了单片机无线测控电路，试验证明它达到了预定的控制效果。
There is description on the design principle of power regulator, circuit drawings for main and control feedback circuits.
阐述了调功器的设计原理、主回路和控制回路的电路图。
The design of a fireworks display control circuit is based on the ARM S3C2440 controller, the CAN bus communication technology and Embedded technology.
利用ARM S3C 2440微控制器、网络通信技术和嵌入式技术设计烟花燃放控制电路。
Programming realized the CO2 welding systems of digital control. Based on CAN bus circuit, the CAN bus communication protocol design is discussed in more detail.
编程实现了整个焊接系统的数字化控制篙详细说明了CAN总线电路的设计、CAN总线的通信协议设计。
Because of the low circuit complexity and the advantage of easy to control, high efficiency, good reliability and so on, the design chooses the way of schematic input to finish it.
选择原理图输入方法，是考虑到本电路复杂度不高，而原理图输入可控性好，效率高，可靠性强且直观，可以熟悉较底层的结构。
Have carried on the detailed parameter design to the phase-shifted Full-Bridge soft switching power supply main circuit and the control circuit.
对移相全桥软开关电源主电路和控制电路进行了详细的参数设计。
This paper has made exposition to the design process of the motor drive electric control circuit and the fluid drive PLC control system in the machine processing control system based on PLC.
对基于PLC的机加工控制系统中的电机电器控制线路和液压传动PLC控制系统的设计过程作了阐述。
Based on usual circuit, this paper analyzed the critical competition in the design of electric appliance control of circuit with contact.
本文以常见的继电器顺序控制电路为例，重点分析了在设计有触点的电器控制线路及实际应用中，常常忽视的临界竞争问题。
Research of HAPF generally focuses on topology of main circuit and control module design.
混合有源滤波器主要集中在主电路拓扑形式和控制模块的研究。
The paper introduces a design of PWM control circuit based on FPGA.
本文提出了一种采用现场可编程门阵列器件（FPGA）实现PWM控制电路的方案。
应用推荐