Some decisions, such as wall thickness and pin diameter, may depend on scientific calculations, but the nonscientific component of design remains primary.
有些决定，如壁厚和销轴直径，可能取决于科学的计算，但非科学的部分的设计仍然是首要的。
The protective layer of the side wall waterproof layer and waterproof layer should be closely combined, the thickness of the protective layer shall comply with the design requirements.
侧墙卷材屋顶防水层的保护层与屋顶防水层应结合紧密、保护层厚度应吻合设计要求。
This paper introduces the design and implementation of parison wall thickness control system in blow molding machine.
介绍了型坯壁厚控制系统在中空吹塑机中的设计与实现。
Total weight of the structure was selected to be optimal objectives. Average diameter and wall thickness of the structural element were taken as design variables.
以结构的总重量最小为优化目标，以导管的平均直径和壁厚作为设计变量，考虑强度、刚度和稳定等约束条件。
Total weight and seismic strain energy of the structure were selected to be optimal objectives. Average diameter and wall thickness of the structural element were taken as design variables.
以结构的总重量最小和结构的总应变能最大为优化目标，以导管的平均直径和壁厚作为设计变量，考虑强度、刚度和稳定等约束条件。
Proper design of roller cone angle of smooth rolling is the key to obtaining a high accurate wall thickness.
斜轧穿孔机轧辊形状设计十分重要，其中辗轧锥角的正确设计是获得高精度壁厚的关键。
The design models of blank of tapered wall thickness cone and equal wall thickness cone with deviation from sine law are presented.
同时给出了考虑偏离正弦律强力旋压等壁厚和变壁厚锥形件毛坯的设计模型。
The circle steel coal bucket is a main building in large thermal power plant, but in national and departmental standards there are no design articles about the wall thickness calculation.
钢圆煤斗是大型火力发电厂主厂房一个重要的建筑物，但现行的国家及部门规程规范中没有相应的计算煤斗壁厚的设计条文，故有必要对其计算方法作一综合性的探讨。
Based on GB 150-1998, a mathematical optimum design model of wall thickness and exterior strengthen structure for rectangular pressure vessel was established.
在GB 150—1998《钢制压力容器》标准上建立矩形截面容器筒体壁厚和刚性外加强圈的优化设计模型。
The analysis result shows that the section can work reliably and the wall thickness is the key design variable.
计算结果表明，在最苛刻的加载方式下，轨姿控舱体的强度可以满足设计要求；壁厚尺寸是关键的优化设计变量。
Based on analyzing the wall thickness design and stability checking method of drum, the finite element analysis of the crane 'drum is studied.
在分析传统卷筒壁厚设计与稳定性校核方法的基础上，对起重机卷筒进行了有限元分析。
The design thought of hydraulic balance type oil tank solved the above problem. The structure shape and the calculation method of wall thickness were rec...
该文介绍了液力平衡式大型油罐的结构形式和壁厚计算方法，同时提出了液力平衡式大型储油罐设计时应注意的主要问题。
The selection of pipe wall thickness, the calculation and design key points of the melt flow, melt pipe flow pressure fall and melt flow speed in the design of melt pipes were introduced in detail.
介绍了熔体管道设计中管道壁厚选择、熔体流量、熔体管道流动压力降和熔体流速等计算方法和设计要点。
The selection of pipe wall thickness, the calculation and design key points of the melt flow, melt pipe flow pressure fall and melt flow speed in the design of melt pipes were introduced in detail.
介绍了熔体管道设计中管道壁厚选择、熔体流量、熔体管道流动压力降和熔体流速等计算方法和设计要点。
应用推荐