The prepulse phenomena in the discharge process of accelerator are analyzed in this paper.
分析了脉冲线加速器在放电过程中产生的预脉冲电压现象。
The electro-pulse discharge process was verified by a set of pin-plane-pin electrode device.
通过“针—板—针”电极放电实验证实了上述串联脉冲放电过程。
The specific capacitance of composites shows no obvious fading after 30 times in the charge-discharge process.
在充放电30次以后，材料的放电比电容基本不再发生变化，趋于稳定。
The fluidizing characteristics and powder discharge process of gas fluid bed reactor with Hypol process were described.
介绍了聚丙烯流化床反应器流化特性和卸料过程；
Through analysis, an actual discharge process line method should be adopted to calculate calculating average discharge per diem.
经分析采用了实测流量过程线法推算日平均流量，推算成果满足《规范》规定的精度要求。
Fluid model was used to analyze the discharge process and the discharge efficiency of the driving pulse with different wave shapes.
本文采用流体模型，分析了多种驱动电压波形下，PDP的放电过程和放电效率。为选择合适的外加驱动电压提供帮助。
The computing cases show that both the mean discharge process and variance process can be given for the stochastic flow concentration model.
提供的算例表明，对于随机汇流模型，不仅可以给出均值出流过程，而且同时可以给出其方差过程。
The result shows that the change of the exchange current and lithium-ion diffusion coefficient is different in the charge and discharge process.
结果表明：充电和放电时交换电流及扩散系数变化不同。
The treatment capacity of high-cobalt zinc concentrate can be increased by reasonable batching and cobalt discharge process of low-cadmium solution.
通过采用合理的配料，运用贫镉液钴开路工艺，提高了高钴锌精矿的处理能力。
It has advantages in reversibility, kinetic of charge-discharge process and safety performance, and becomes the hotspot of research in anode material.
它是一种理想的嵌入型电极材料，具有充电次数多、充电过程快、安全等特点，这使其成为研究新型锂离子电池负极材料的热点。
There are three important parameters in the DC glow discharge process, the discharge current, discharge voltage and argon pressure in discharge source.
直流辉光放电过程中需要控制的三个重要工作参数为放电电流、放电电压和放电室内氩气气压。
The discharge process and mechanism of gliding arc, the structure of gliding arc reactor and its application in chemical engineering were all reviewed.
本文介绍了滑动弧光等离子体的产生过程及反应器结构，并对其在化工领域中的应用进行了综述。
Influence of function form of the characteristic impedance on discharge process and classification of discharge stability are analyzed and problems are discussed.
分析了特性阻抗的函数形式对放电过程的影响以及放电稳定性的分类等，对存在的问题也进行了讨论。
The results showed that the odd harmonics of the ripple was due to the circuit asymmetry and the even harmonics due to the charge-discharge process of capacitors.
结果表明，纹波可以分为由电路非对称性产生的奇次谐波和电容器充放电产生的偶次谐波。
The space charge layer formed during point discharge process is not enough to prevent the leader from marching, and can not prevent the forming of upward leader, either.
人工尖端放电形成的空间电荷层既不足以阻止先导的继续推进，也不能防止产生上行先导。
The operation process of the closed variable mass energy transformation and storage (VMETS) system composes of two processes namely the charge process and the discharge process.
变质量能量转换及储存系统运行过程由充能和释能两个过程组成。
The models can be used to explain the discharge process of the capillary and provide theory for the parameters choices and technique design. It showed that the staged power supply...
理论模型较好地描述了毛细管电弧放电过程，为补偿脉冲发电机的参数选择和方案设计提供了理论依据。
The self-pulsing current has unchangeable rising time under various conditions. The experimental results indicate that the self-pulsing is a behavior controlled by the discharge process.
电流脉冲上升沿几乎与平均电流、气压或并联电容无关。实验结果表明，自脉冲现象是空心阴极本身的一种特征放电过程。
The dielectric barrier surface discharge process is simulated using Poisson's equation and drift-diffusion equation and the distribution history of electron, ion and electric field is gained.
采用泊松方程和漂移-扩散方程对介质阻隔面放电进行数值模拟，得到了电子、离子以及电场分布随时间的变化。
The black material is considered as carbon deposition, which is formed by oily-liquid medium fission product (mainly carbon black) covering inside crack during the discharge process of pulse current.
认为这些黑色覆盖物为脉冲电流在放电过程中，油性液体介质裂变产物(主要为碳黑)涂覆在裂纹内部形成的积碳。
Can multipoint feeding, can also be a multipoint discharge, process arrangement is more flexible.
能多点加料，也能多点卸料，工艺布置较为灵活。
Can multipoint feeding, can also be a multipoint discharge, process arrangement is more flexible.
能多点加料，也能多点卸料，工艺布置较为灵活。
应用推荐