A class of real-valued discrete transforms for real discrete signal processing is DE - fined.
本文定义了一类用于实值离散信号处理的实值离散正交变换。
Now, another type of electrical signal, which is becoming common, is the digital or discrete signal.
当今，另一种电信号形式变得越来越常用，就是数字或者是离散信号。
It can be taken as a kind of discrete signal and do spectrum analysis by discrete Fourier transform.
在计算生物学中，常采用离散傅立叶变换进行频谱分析。
Based on the practical application, the filtering method of the discrete signal for PLC control system are introduced in details in this paper.
从工程实际出发，介绍了PLC控制系统中离散量信号的采样滤波方法。
This is a kind of perfect discrete signal with more extensive concept than the common dyadic code but with the same good dyadic relative properties.
这是一类比普通并元码概念更加广泛，但同样具有良好并元相关特性的最佳离散信号。
This paper describes the need to transform the continuous periodic signal in time domain to the discrete signal in frequency domain by using Fourier Series (FS).
讨论了利用傅里叶级数把连续周期时域信号转换成离散的频域信号的必要性。
The theoretical formulas of discrete signal processing and circuit structure in the system are described, and results of wind-speed measurement are analyzed and compared.
文中详细介绍了时空域离散信号处理的理论计算公式和处理系统结构，对风速测量结果进行了分析和比较。
By this method, for a real excitation discrete signal or a simulating signal, the response time series of a non-linear system can be easily obtained based on the Z-transform technique.
通过这种方法能比较容易地获得非线性系统对于实激励离散信号或模拟信号的响应时间序列。
A device that is similar to a microprocessor, except that the internal CPU has been optimized for use in applications involving discrete-time signal processing.
一种类似于微处理器的的设备，不同的是它内部的CPU被优化，用于特定的应用，如离散信号处理。
One of the most common digital-signal-processing techniques is the discrete Fourier transform (DFT), which breaks a signal into its component frequencies and can be represented as a matrix.
最常见的数字信号处理技术之一是离散傅立叶变换（DFT），它把一个信号分解成它的组成频率，并表示成一个矩阵。
The Discrete Fourier Transform (DFT) plays an important role in digital signal processing and many other fields.
离散傅里叶变换（DFT）在数字信号处理等许多领域中起着重要作用。
Firstly, the paper models the multivariable discrete state-space model of the air transmission unit by the lab method, using multi-dimensional inverse m series as input stimulus signal.
首先利用多维逆m序列作为激励输入信号，用实验法建立出空气传送部分的多变量离散状态空间模型。
As an important class of hybrid dynamical systems, a switched system is composed of several continuous time subsystems or discrete time subsystems and the switching signal among them.
切换动态系统是一类重要的混合动态系统，它是由几个连续时间子系统或离散时间子系统及作用在其中的切换规则构成的。
In the field of signal analysis, the DFT (Discrete Fourier Transform) is a well known term.
在信号分析领域，DFT(离散傅立叶变换)是一个常见术语。
Application DFT Discrete Fourier Transform, right through MATLAB continuous signal spectrum analysis, in order to meet the theoretical analysis and practical needs.
应用离散傅里叶变换dft，通过MATLAB实现对连续信号频谱分析，以满足理论分析和工程实际的需要。
Discrete Cosines Transform (DCT) is an effective tool for analysis image signal.
离散余弦变换是分析图像信号的有效工具。
The decisive factor is that the differentiation is not based on a sample over a discrete time period, but is a physical effect, so that the user sees a dynamic, low-noise acceleration signal.
决定性的因素是这种区分是没有根据的样本离散多时间，但它是一个物理作用，使用户会看到一个充满活力，低噪声加速度信号。
A unit of signalling speed equal to the number of discrete conditions or signal events per second.
信号传输速度的一种单位，等于每秒内离散状态或信号事件的数量。
In the output signals of quartz weighing sensor, the temperature drift noise is first order or over first order continuous, however, the weighing exciting signal is discrete.
石英称重传感器的输出信号中的温度漂移噪声是一阶或一阶以上连续的，而称重激励信号的变化是离散的。
Secondly, a DSTFT(Discrete Short Time Fourier Transform )-based demodulation method for the 2FSK signal is studied and algorithms for symbol synchronization and symbol decision are analysed.
重点研究了基于离散短时傅里叶变换解调2FSK信号的方法，分析了几种码元同步算法和码元判决算法。
According to the dynamical equation and the theory of closed loop feedback, the angle scheme of signal detector and discrete exciter in circumferential direction is deduced.
根据半球谐振陀螺的动力学方程和闭环反馈理论，推导出离散激励器和信号检测器在壳体环向的角度配置；
Operation of discrete convolution and discrete correlation will spend too much time to process a signal in time.
时域离散卷积和相关运算一般耗时太长，对信号进行处理的实时性较差。
The standard method for spectrum analysis in digital signal processing is the discrete Fourier transform(DFT), typically implemented using a fast Fourier transform(FFT) algorithm.
数字信号处理中标准的频谱分析方法是离散傅立叶变换（DFT），典型的实现方法是快速傅立叶变换（FFT）。
In random signal processing or simulating systems, the test of discrete digital signal randomicity is often needed. By which the compositions or the specialties can be testified.
在随机信号测量或仿真系统中，经常需要对离散数据信号进行随机性检验，以确定待测信号的特性或组成成分。
In this paper, the signal processing methods are introduced to improve the effect of display by regarding surface vectors as discrete vector signals and implementing low-pass filtering on them.
本部分研究通过把表面法矢量视为离散矢量信号，引入信号处理中滤波器的方法来平滑表面法矢量。
The filter processes input discrete sampling signal to recover continuous signal and suppress harmonic noise, and the zero-crossing frequency measuring method is improved.
该滤波器通过处理输入离散采样信号获得连续信号并抑制谐波噪声，改进了过零测频方法。
Then how to represent a continuous signal in term of a discrete sequence is a fundamental problem.
如何根据离散序列表示一个连续信号是一个基本问题。
The discrete magnitude signal test module realized the auto test for discrete magnitude signal and discrete magnitude input card.
离散量信号测试模块完成离散量信号和离散量输入卡的自动测试。
The discrete magnitude signal test module realized the auto test for discrete magnitude signal and discrete magnitude input card.
离散量信号测试模块完成离散量信号和离散量输入卡的自动测试。
应用推荐