But there are limits to how many blades can be tacked onto the rotor's drive shaft, and once again weight becomes a consideration.
但是安装到旋翼驱动轴上的桨叶数量是有限制的，而且飞机的重量同样需要考虑。
In his application Selden described a machine with a gasoline-driven, combustion-type engine that sat in front of the driver; a clutch; a foot brake; a drive shaft; and front-wheel drive.
申请中，赛尔登描述了一项机器是石油驱动、在驾驶座前有燃烧式发动机；离合器、脚刹车、前轮驱动。
Valve drive shaft connected with the platform in line with the ISO5211 standard.
阀门轴端与驱动器的连接平台符合ISO 5211标准。
During the start and stop of the drive shaft, the swing frame of the soft support will have a very obvious vibration.
在传动轴启动和停转的过程中，软支承的摆架会有非常明显的振动，硬支承的摆架则没有这种现象。
Pump wear parts are mainly drive shaft and bushing, passive gear center hole and shaft pin, pump shell lumen and gear, gear face and pump cover, etc.
齿轮泵的磨损部位主要有主动轴与衬套、被动齿轮中心孔与轴销、泵壳内腔与齿轮、齿轮端面与泵盖等。
For the drive shaft balancing machine, the hard bearing can achieve the accuracy is far beyond the actual needs.
对于传动轴平衡机来说，硬支承所能达到的精度也远远超出了实际需要。
If it is found that the accuracy of a drive shaft balancing machine can not meet the requirements, it must be the result of other factors.
如果发现一台传动轴平衡机的精度不能满足要求，那一定是其它因素造成的结果。
Drive shaft a drive shaft and universal joints connect the transmission to the rear drive axle on most rear-wheel-drive vehicles.
传动轴在大多数后轮驱动的车辆中主要是靠传动轴和万向节连结着变速箱与后轮驱动桥。
Double joint added to the front drive shaft and the shaft made longer.
改装内容包括双十字轴和加长前传动轴。
Pump drive shaft and bushing wear, the tolerance clearance increases, will affect oil pump.
齿轮泵主动轴与衬套磨损后，其配合间隙增大，必将影响泵油量。
These parts include the clutch, the transmission, the drive shaft, and the final drive assembly.
这些部件包括离合器、变速器、传动轴和后桥总成。
In this, can use repair drive shaft and bushing method to recover its normal fit clearance.
遇此，可采用修主动轴或衬套的方法恢复其正常的配合间隙。
Shutter Windows open easily and electrical control, electric button switches, rocker hand, a belt wheel, the spring drive shaft and other open manner.
卷帘门窗开启自如，有电动遥控、电动按键开关、手摇杆、手拉皮带、弹簧轴驱动等多种开启方式。
Going into the gearbox, universal joints connect the centre drive shaft to the internal bevel gears.
进入变速箱，万向节连接中心传动轴到内部锥齿轮。
If the drive shaft wear mild, just press the old bush changed after standard size bushing, fit clearance can be restored to allow range.
若主动轴磨损轻微，只需压出旧衬套后换上标准尺寸的衬套，配合间隙便可恢复到允许范围。
Torsional and bending load spectra of drive shaft are worked out and fatigue life of the shaft estimated.
编制出驱动轮轴扭转与弯曲载荷谱，并对驱动轮轴的随机疲劳寿命进行了估算。
后传动轴截短。
Using traditional method to solve strength and stiffness problem with drive shaft under complex loads features boring and arduous calculation work.
用传统方法求解有复杂载荷作用的传动轴的强度与刚度，需要十分繁重的计算工作量。
The maximum amplitude, stability and amplitude jump of main resonance describe the primary characters of a drive shaft.
传动轴主共振的最大振幅、稳定性、振幅突变性是其主要特性。
A special support style of drive shaft is described, which prevents the shaft from transferring rotary moment and being subject to bending moment at the same time.
介绍了一种特殊的传动轴支撑结构型式，它的优点在于避免轴既要传递转矩，又要承担弯矩。
The main methods used to reduce ELFE include electromagnetic field protection technology, driven shaft earthing system, drive shaft earthing system and electric field counteracting system.
电磁场防护结构工艺、被动轴接地系统、主动轴接地系统和电场抵消系统是目前降低舰船极低频电场的主要方法。
The main methods used to reduce ELFE include electromagnetic field protection technology, driven shaft earthing system, drive shaft earthing system and electric field counteracting system.
电磁场防护结构工艺、被动轴接地系统、主动轴接地系统和电场抵消系统是目前降低舰船极低频电场的主要方法。
应用推荐