The dynamic mechanical properties of cast PU were experimentally investigated.
试验研究浇注型PU的动态力学性能。
The structure and dynamic mechanical properties are investigated via SEM, DMA, etc.
利用SEM、DMA等，研究了该材料的结构和动态力学性能等。
The improvement of dynamic mechanical properties and the repertory of such data are necessary.
改进动态力学性能和搜集这样的数据是必要的。
Experimental results show that effect of surface state of filler on dynamic mechanical properties of composites is very great.
研究结果表明，填料表面状态对复合材料的动态力学性能影响很大。
The dynamic mechanical properties of glass bead filled LDPE composites were Iivestigated by using of a dynamic mechanical analyzer.
应用动态力学分析仪，考察了低频条件下玻璃微珠填充LDPE复合材料的动态力学性能。
Effect of surface state of filler on dynamic mechanical properties of composites was investigated with dynamic mechanical analysis.
本文采用动态力学分析研究了填料表面状态对复合材料动态力学性能的影响。
The static and dynamic mechanical properties have been studied for PP that have been injected at different melt temperature and mold temperature.
本文研究了在不同的熔体温度和模具温度下，注射成型的聚丙烯塑料试样的静态和动态力学性能；
The curves of heat build-up vs temperature or frequency for 10 compounds were respectively obtained by measuring the dynamic mechanical properties;
通过试验测定10个部位胶料的动态力学特性值，分别得到其生热率温度和生热率频率变化曲线；
The effect of the blending time on the structure, the static and dynamic mechanical properties of dynamically vulcanized EPDM/PP blend was investigated.
研究了共混时间对动态硫化EPDM/PP体系结构、静态以及动态力学性能的影响。
The microstructure of the NBR/AO-60 composite was characterized by DSC, SEM, XRD and DMTA, and its thermal and dynamic mechanical properties were studied.
利用差示扫描量热（DSC）、扫描电镜（SEM）、X射线衍射（XRD）、动态力学分析（DMTA）等测试手段对该复合材料的结构进行了表征，并对其动态力学性能进行了研究。
Research results demonstrate that the 10t fast loading equipment is applicable to study on dynamic mechanical properties of soft rocks under medium strain rate.
实验结果表明：10吨快速加载机适用于软岩在中等应变速率下的动态力学性质的研究。
DSC, XRD, DMA and other testing methods were used to study the crystallization properties, dynamic mechanical properties of different polymer with carbon fiber.
运用DSC、XRD、DMA等测试手段，研究了对于不同树脂基体，碳纤维对基体的结晶性能、动态力学性能等的影响。
The effects of the environments on the dynamic mechanical properties of the pultruded CF/VE composite were studied by dynamic mechanical thermal analysis (DMTA).
通过动态机械热分析（DMTA）考察了环境条件对复合材料动态力学性能的影响。
AIM: To study the influence of trypsin on the membrane dynamic mechanical properties and the surface charge density of single living intact red blood cell (RBC).
目的：研究胰蛋白酶对人红细胞膜表面电荷密度及动态力学特性的影响。
The dynamic mechanical properties and heat build up of black-filled rubber are predicted at different load conditions based on the concept of strain amplification.
基于应变放大因子的概念，对炭黑填充橡胶的动态力学性能和在不同外载条件下的生热性能作了分析预报。
Impact experiment equipment was used to study the dynamic mechanical properties and characterization method of a new kind of damping aluminum alloy under impact load.
采用冲击实验装置研究了新型阻尼铝合金材料在冲击载荷作用下的动态力学性能及表征方法。
The melting temperature, melting heat, static and dynamic mechanical properties of PA6/PTFE blends and PA66/PTFE blends are experimentally investigated in this paper.
研究了PA6/PTFE和PA66/PTFE共混物的熔融过程的热学性能、动态力学性能和吸水前后的静态力学性能。
The physicochemical properties and dynamic mechanical properties of aromatic polyamide cord and the performance of tire with aromatic polyamide belt were investigated.
研究了芳纶帘线的物化性能、动态力学性能及芳纶带束层(缓冲层)轮胎性能。
The dynamic mechanical properties of three kinds of paper cone material, including bleached softwood kraft pulp, bleached cotton pulp and unbleached hemp pulp were studied.
利用动态力学分析仪研究了纸质振膜材料的动态力学性能，以及打浆、纸浆种类和化学助剂对纸质振膜材料的密度、弹性模量和损耗因子的影响。
The effects of blend ratio, curing system, reinforcement agents, soften agents and silane coupling agents on dynamic mechanical properties of IIR/CIIR blends were researched.
研究了共混比、硫化体系、增强剂、软化剂和硅烷偶联剂对IIR/CIIR共混胶动态力学性能的影响。
Dynamic mechanical properties of diacetate fiber with various moisture contents were investigated by DMA. Various relaxations of the fiber and their mechanisms were analyzed.
利用动态力学分析研究不同含水率的二醋酸纤维的动态力学性能，分析二醋酸纤维的各种松弛类型及其机制。
The synthesis and dynamic mechanical properties of AB crosslinked Polymer(ABCP) and simultaneous interpenetrating polymer networks (IPN) based on castor oil polyurethane were studied.
研究了蓖麻油聚氨酯基AB型交联聚合物（ABCP）及同步法合成互穿聚合物网络（IPN）的动态力学谱。
The effect of grafting on the crystallization and dynamic mechanical properties of PP have also been investigated by the determination of the crystallization rate and dynamic mechanical loss.
通过测定结晶速率和动态力学损耗的方法研究了接枝对聚丙烯的结晶行为和动态力学性质的影响。
The effects of the amounts of curing agent and HTBN on the adhesive properties, as well as glass transition temperature, dynamic mechanical properties and electrical properties were investigated.
研究了固化剂用量及丁腈羟用量对粘接性能的影响及这种增韧环氧树脂的玻璃化转变、动态力学性能和电性能，并对反应机理进行了初步探讨。
The ball bearing is widely used in aero-engines. Its mechanical properties exert important influence on the dynamic characteristics of rotor systems, especially at high speed.
滚动轴承作为航空发动机转子系统广泛采用的一种支承，其力学特性对转子系统的动力特性有重要的影响，尤其是高速下更为显著。
The different compatibility between CE and CTBN caused by various acrylonitrile content in liquid carboxyl terminated rubber also affect the dynamic mechanical and thermal properties of the blends.
由CTBN中不同的丙烯腈含量所引起的CE与CTBN之间不同的相容性还影响了改性体系的动态力学性能和热性能。
In this paper, the working performance, mechanical properties and dynamic performance of waste rubber modified concrete has been studied.
本文主要研究了废橡胶改性混凝土的工作性能、力学性能和动力性能。
Their dynamic mechanical and mechanical properties were investigated via changing feeding order and swelling time as well as using the method of multistage polymerization for interpenetration.
通过改变加料顺序、溶胀时间及双相互穿等多步聚合方法，考察了动态力学和力学性能变化的规律。
Their dynamic mechanical and mechanical properties were investigated via changing feeding order and swelling time as well as using the method of multistage polymerization for interpenetration.
通过改变加料顺序、溶胀时间及双相互穿等多步聚合方法，考察了动态力学和力学性能变化的规律。
应用推荐