Some of the items on display—including the ejector seat—have never before been allowed out of Russia, says the Council.
协会说好多展品是第一次离开俄罗斯赴外参展的,包括那个弹射座。
隐藏弹射座椅的操纵杆。
At last, numerical simulation of this ejector was performed.
最后,对引射器进行了数值模拟。
The plain diameter ejector pin may be used in one of two ways.
普通的顶杆可以有两种使用方法。
In this case, the safety of the returning ejector should be ensured.
在这种情况下,必须确保顶杆复位的安全性。
The ejector with a lobed nozzle is of high efficiency in pumping and mixing.
波瓣喷管引射器具有高效的引射掺混特性。
Each ejector pin diameter has a number of different lengths associated with it.
每一种顶杆直径有许多不同长度。
Upper ejector rod was added in the die structure for ease of workpiece separation.
在模具结构中增加了上项杆(上打料棒),便于工件脱离。
Suitable sizes of push-back pins may be selected from a standard ejector pin range.
回程杆的合适尺寸可以在标准的顶杆范围内选择。
The direction of movement of this ejector pin is, therefore, controlled by this hole.
因此顶杆的运动方向由这个孔来控制。
The mould plate and ejector grid system is shown in chain-dotted lines in the cross-sectional view.
模板和顶料格架系统在剖面图上以点划线表示。
Three-plate mold; Pointed gate; Mold ranging parting; Restricted ejector of fixed-die; Mold structure.
三板模;点浇口;模外定距分型;定模限位顶出;模具结构。
The vent system composed of vent groove, vent plug and clearance of ejector pin can fit the need of venting.
采用分型面排气槽、顶杆间隙排气与排气塞排气相结合的排气系统设计能够很好地满足模具排气需要。
The location of the ejector pin elements, and the number used, is dependent on the components size and shape.
顶杆零件的位置和数目,取决于塑件的尺寸和形状。
Adopts stratified air conditioning mode with ejector nozzle air supply outlets for this large space building.
该展览中心空间高大,采用分层空调方式,喷口送风。
The Calculating methods of the ejector were presented using the theoretical base of One-dimensional ideal flow.
采用理想流体一元管流理论,建立了引射器的理论计算方法。
The space shuttle used ejector seats during its first four test flights - but only for the two pilots up front.
航天飞机在最初四次试飞阶段安装了弹射座椅,但仅仅是为前面两个驾驶员加装了这一装置。
A scheme using lime waste water as absorbent and selecting ejector scrubber for sulfur dioxide removal is suggested.
提出用石灰废水为吸收剂、选择引射式洗涤器来进行烟气脱硫的方案。
This paper presents an analytical method for calculating the flow field and performance of supersonic ejector nozzle.
本文介绍了超音速引射喷管的流场和性能的理论计算方法。
A virtual wind chamber was proposed to accurately predict entrainment rate of the ejector at variable mainstream speed.
提出了一种虚拟风室模型,以精确计算引射器在各种主流速度下的引射空气量。
In this paper, the flow field of the supersonic diffuser and the subsonic-supersonic ejector is simulated by numerical method.
本文采用上述数值算法模拟了超声速扩压器和超声速引射器内流场。
The filter-ejector (5) is keyed to said lower part (1.2), so that both the first and second cam can rotate with respect to it.
该过滤器-排出器(5)销连接到所述下部(1.2)上, 使得第一和第二凸轮两者都可以相对于下部(1.2)旋转。
The type KH-2 ejector results in a higher benefit than KH-1. The problem of riser vibration has also been successfully resolved.
研制的KH -2型喷嘴经济效益比KH - 1型有提高,还成功地解决了提升管的振动问题。
From the experimental results the effects of nozzle axial position and mixer tube length upon ejector characteristic are revealed.
对实验结果进行分析,指出喷嘴轴向位置,混合管长度对引射器特性的影响。
The working process for cold extruding of valve-spring base has been described, with a new die structure using ejector turning of itself.
介绍了气门弹簧座的冷挤压工艺和新型模具结构。
Using solid rocket as gas generator, the sea level static ejector modal experiment was conducted successfully, and relevant data was obtained.
以固体火箭发动机作为燃气发生器,成功的进行了静态海平面零马赫状态下引射模态实验,获得了相关实验数据。
Many of the difficulties just described are avoided by the use of an auxiliary ejector and an engine exhaust diffuser which are placed in tandem.
利用直列放置的发动机排气扩压器和辅助引射器,可以避免上述许多困难。
The calculated results agree well with the test results and it shows that the numerical methods can be used for the study of the supersonic ejector.
计算结果与实验结果符合较好,这表明该数值方法是研究超声速引射器的一种重要研究手段。
Besides adopting rapping device for ash cleaning, three layers of shock wave ash ejector holes are also reserved and arranged on the horizontal pass.
本项目的清灰方式除采用振打装置外,还在水平烟道上预留布置了三层激波吹灰器孔。
Besides adopting rapping device for ash cleaning, three layers of shock wave ash ejector holes are also reserved and arranged on the horizontal pass.
本项目的清灰方式除采用振打装置外,还在水平烟道上预留布置了三层激波吹灰器孔。
应用推荐