The reason for axial snap-back is that the recovery of axial elastic strain is faster than...
轴向回跳的原因是轴向弹性应变的恢复快于轴向塑性应变的增加。
Under this framework, the stress-strain relations are derived from a pseudo-elastic strain-energy density.
在这一理论框架下，增量的应力应变关系可以从所构造的能量函数中推导出来。
Vibration times hardly have effect on the changing of the elastic strain in the condition of the dynamic stress.
在动应力条件下，振次几乎对动应变中的弹性应变的变化没有影响。
The reason for axial snap-back is that the recovery of axial elastic strain is faster than the increase of axial plastic strain.
轴向回跳的原因是轴向弹性应变的恢复快于轴向塑性应变的增加。
The total strain is thus made up of elastic strain, possibly combined with plastic strain that results from slip, creep, or both.
这样，应变包含了弹性应变、滑移导致的塑性应变，徐变或I?两者皆有。
The analysis suggests that this could be due to the re-distribution of the elastic strain energy during the incomplete transformation.
分析表明，不完全相变过程中的弹性能再分布是可能的温度记忆效应机制。
It is pointed out that bulging strain is consisted of not only instaneous elastic strain, but also creep strain which changes with time.
指出鼓肚变形不仅有瞬时弹性变形，而且还有随时间变化的蠕变变形。
We found: the samples experience elastic and plastic deformation processes before fracture, and the elastic strain is very large, it is about 2%.
结果表明：该合金的室温压缩变形过程表现为弹性和塑性变形，弹性应变很大，可达到2%。
Similarly, the reason for lateral snap-back is that the recovery of lateral elastic strain is faster than the increase of lateral plastic strain.
侧向回跳的原因是侧向弹性应变的恢复快于侧向塑性应变的增加。
In theoretical investigations, elastic strain energy method, fiber inclination model, three cells model and finite element model etc. are introduced.
在理论研究方面，介绍了弹性应变能法、纤维倾斜模型、三细胞模型和有限元模型等工作。
Subtracting the elastic strain from the total strain yields the non-local plastic shear strain that depends on the flow stress and the damage variable.
将非局部总应变减去弹性应变，可得剪切带的非局部塑性应变。
The elastic strain, plastic strain and fracturing are integrated and coupled with fluid and chemistry using an incremental stress rheological approach.
采用递增应力流变学方法将弹性、塑性、断裂变形结合并与流体和化学耦合起来。
A systematic investigation is made on the influence of the longitudinal and transverse period distributions of quantum dots on the elastic strain field.
对量子点超晶格材料中量子点纵向周期和同层量子点的横向周期间距对量子点及其周围应变场分布的影响进行了系统的研究。
The various subgrade stiffness parameters for evaluating elastic strain energy stored in subgrade are inferred by using the principle of energy equivalency.
导出了计算储存在半无限弹性地基中弹性变形能所需的各种地基刚度。
On the basis of the experimental results and theoretical analysis, a damage formula about the difference of plastic strain and elastic strain is put forward.
基于实验结果和理论分析，提出了一个考虑弹塑性应变幅比重不同的损伤公式，并与其它五种损伤公式寿命预测的结果做了比较。
Prolonging the heat-setting time to provide enough relaxation time for high elastic strain, which can also reduce the inner stress and the dry heat-shrinkage.
延长定型时间有利于高弹形变的松弛，降低内应力，有利于降低干热收缩。
The conclusion is that this acoustic anomaly may be interpreted by nonlinear coupling of the elastic strain field to the fluctuation of the soft-mode coordinate.
这种声学反常行为可以用均匀弹性应变场与软模坐标涨落的非线性耦合来解释。
The distributions of equivalent plastic strain, dissipated, kinetic and elastic strain energies are all dependent on the gradient distribution of the composition.
等效塑性应变的幅值、动能、弹性应变能及耗散能随时间的变化规律与功能梯度材料组份成分沿厚度的变化密切相关。
The measured strain of concrete includes the elastic strain, creep strain and also the non-stress strain like the concrete free deformation and temperature strain.
混凝土实测应变包含弹性应变、徐变应变及混凝土自由变形、温度应变等非应力应变。
During the transient creep after stress decrease, it has been found that the total strain transient consists of two components, elastic strain and anelastic strain.
当外加应力突然降低后，在瞬时蠕变过程中发生了弹性应变和滞弹性应变，整个降载过程中的应变变化值与应力变化值成线性关系。
Basing on fractureing calculation model with pore elasticity theory, the elastic strain in horizontal direction has been determined with hydraulic fractureing curve.
依据压裂曲线，利用破裂压力孔隙弹性计算模型，计算得到了在两个水平主应力方向的弹性应变量；
M1 and M2 are two different martensite variants with diverse elastic strain energy and lattice distortions, which transformation to austenite at different temperatures.
M1和M2是马氏体的两种变体，有着不同的取向结构和弹性应变能，使得M1和M2在不同的温度下转变成奥氏体。
This means a reduction in initial elastic strain under application of priestess force and a reduction in creep strain, which is approximately proportional to elastic strain.
这意味着应用预应力下的初始弹性应变的降低和减少蠕变，这大约是成正比的弹性应变。
Reducing the tension upon the fiber under high temperature to provide enough movement space for polyester segments, which is beneficial to the relaxation of high elastic strain.
适当地降低高温下纤维的张力，为高分子链段的运动提供了活动空间，有利于高弹形变的松弛。
The results show that the loss of mechanical energy, the loss angle and the accumulation of the large elastic strain energy can be used to evaluate covering properties of carpets.
结果表明，机械能量损耗、损耗角及累积最大弹性应变等指标能评定地毯的铺地性能。
The total deformation of soils consists of three parts: elastic strain, plastic strain related to volumetric yielding mechanism and plastic strain related to shear yielding mechanism.
土体总的变形由三部分组成：即弹性应变、与体积屈服机制相关的塑性应变和与剪切屈服机制相关的塑性应变。
The solution of the Earth elastic dynamical equations can be also referred to some relations of complex vector spherical harmonic functions to the elastic strain tensor in spherical coordinates.
同时还研究了在球坐标系下弹性应变张量与复数矢量球函数的一些关系，为地球弹性动力学方程的解算提供参考。
The shortness of creep loading time and the faster frequency of fatigue load change induce general elastic strain stage to end and delayed elastic strain platform stage to begin under shorter strain.
因蠕变加载作用时间缩短和疲劳载荷变化更频繁，导致在较小的应变下结束普弹应变阶段并进入延迟弹性变形的平台应变阶段。
The relationships between strain rate and the elastic modulus, critical strain, Poisson's ratio and energy absorption capacity of concrete are still studied.
分析了应变率对混凝土弹性模量、峰值应力时的应变、泊松比和混凝土吸能能力的影响。
This paper analyzes the error of torque sensor of strain-resistor which derives from the influences of bending moment on elastic axis, and discusses the Eliminating techniques.
本文对在应用应变式扭矩传感器时由于在弹性轴上的弯矩而引起的误差进行了力学分析，并提出了消除的方法。
应用推荐