In part 3, it introduces embedded software design.
第三部分，嵌入式软件方案的设计。
Its unique engine design is designed for integration with business application software and is optimized for embedded solutions.
它独一无二的引擎设计是为与商业应用软件进行集成而设计的，而且最适用于嵌入式解决方案。
The design of hardware and software of whole embedded system have been made by cross-debug.
通过交叉调试，完成了该嵌入式控制系统的整个软件和硬件的设计工作。
It introduced an embedded video converter composed by MCU, MAX4358, and etc, it described its operation process, hardware constitution and software design.
介绍了一种由单片机、MAX4358等组成的嵌入式视频切换器，简述了其工作过程，硬件构成和软件设计。
There were first, of course, the many hardware and software engineers who envision, design, implement, and test embedded realtime systems.
当然首先是硬件和软件工程师，他们是实时嵌入式系统的提出者、设计者、实现者和测试者。
This paper introduces a method of hardware constitution and software design of embedded system containing Ethernet interface and adopting DSP as its core processor.
介绍了以DSP为核心具有以太网接口的嵌入式系统的硬件电路组成和软件设计方法。
The ESDL language and the EHDL language are defined for hardware and software in the virtual design environment for an embedded system.
在嵌入式系统虚拟开发环境中为软件与硬件分别设计了ESDL语言和EHDL语言。
Then, the software design of the embedded motion controller which based on the PC/104 bus is analyzed.
再次，论文分析了基于PC/104的嵌入式运动控制系统的软件设计。
The design of embedded software of MFMC and the communicating protocols about all communications in digital laboratory system are included in this part.
这一部分主要包括多功能主控制器（MFMC）内嵌软件实现和各部分通信的通信协议的制订。
This paper introduces a kind of way to design a program interface library of the embedded software platform for automobile electronics.
本文介绍了一种支持汽车电子的嵌入式软件平台编程接口库的内容和设计方法。
In this paper, we introduce embedded video compression and decompression system based on a chip ADV202, focus on the design of the system hardware and software process.
本文介绍了一种基于ADV202芯片的嵌入式视频压缩和解压缩系统，重点讨论了系统硬件电路设计及软件流程设计。
The method can be applied to design the real-time embedded software with time requirements.
提出的方法也可用于设计有确定时间要求的实时嵌入式软件。
Then, the design and realization of embedded PSTN gateway and audio terminal are discussed, the realization of embedded software and PSTN gateway that supports multi-terminals are emphasized.
然后对嵌入式PSTN网关和语音终端的设计和实现做了阐述，着重讨论了嵌入式软件以及支持多个终端的PSTN网关的实现；
E. platform based embedded CNC system, unlimited upgrade expansion function. The anti interference design of hardware and software synchronization to ensure the reliable operation of the system time.
基于平台的嵌入式数控系统，无限升级扩展功能。软硬件同步的抗干扰设计，确保系统时间可靠运行。
The TTA provides a software and hardware infrastructure for design and implementation of dependable distributed embedded systems.
时间触发架构（TTA）为设计和实现高可靠性分布式嵌入式系统提供了软件和硬件的模型。
The hardware and software design of embedded swept signal source was introduced, in addition to its operation principle.
介绍了嵌入式扫频信号源的工作原理及硬件、软件设计方案。
The design theory for embedded system hardware and software is expatiated, and the working principle for embedded system remote software upgraded is introduced.
详述了此嵌入式系统硬件和软件的设计思路，并介绍了嵌入式系统实现远程软件升级的工作原理。
This paper completes the design of embedded MP3 player, provide the system structure figure, the circuit diagram of the hardware, software flow chart and compile programme.
介绍了嵌入式MP 3播放器的设计，并给出了系统结构图、硬件电路图、软件流程图以及软件程序的编写。
Traditional methods for designing interface, in our opinion, cannot satisfy the needs of interface design for embedded software system. We purpose a new technology of interface customization.
针对嵌入式软件界面子系统的设计特点，介绍了进行嵌入式软件系统界面设计的可定制技术，并提出了一个界面可定制模型。
Software design in embedded system software for digital television receiver is very complex for the limitation of hardware resource and requirement of realtime processing.
在嵌入式数字电视终端系统软件的设计中，由于终端硬件资源有限和实时性的要求，造成其软件设计具有较高的复杂度。
It introduces the system design of mechanical hand using embedded speech recognition. The design mainly includes two parts: hardware design and software design.
介绍了利用嵌入式语音识别技术来控制机械手的系统设计过程，包括两部分硬件设计和软件设计。
UML is used in detail to describe the embedded MP3 player performance history, including functional analysis, hardware design, software design, software realization, system translation, transplant.
用uml详细描述了嵌入式MP 3播放器的开发过程，包括功能分析、硬件设计、软件设计、软件实现、系统编译、移植等方面。
A applied design scheme for the hardware and software of synthetic protection system for motors which is mainly composed of ADUC812 with embedded MUC is proposed in this paper.
文章提出了以内嵌MUC的ADuC812为主构成的电动机综合保护系统硬件结构和软件框图的应用设计方案。
The similar researches about design and implementation of embedded software architecture of induction gate are still rarely reported in China.
关于感应型检票机嵌入式软件构架的设计与实现，类似的研究在国内仍鲜有报道。
This paper recommends the hardware design and software realization for porting the decode of G723.1 to an embedded processor based on ARM720T core, and analyzes a method of over-sampling.
介绍了G723.1解码算法在一种基于ARM 720t核嵌入式微处理器上移植的硬件结构和软件实现，并分析了一种增采样的方法。
This paper discusses the realization of the embedded network platform of measurement and control, the design of finish - systematic composition, hardware and software design.
本文讨论嵌入式网络测控平台的实现，完成系统的构成以及硬件和软件设计。
This paper mainly presents the embedded system software design of the BS AS (Biochip Scan and Analysis system).
本文主要讨论生物芯片扫描分析系统的嵌入式系统软件设计。
Design and develop embedded software for household appliance inverter driver system and control system in close cooperation with customers.
与客户紧密合作，设计开发家电变频驱动系统和控制系统的嵌入式软件。
Design and develop embedded software for household appliance inverter driver system and control system in close cooperation with customers.
与客户紧密合作，设计开发家电变频驱动系统和控制系统的嵌入式软件。
应用推荐