The results show that AD appears to be a latent accelerator for the anhydride-cured epoxy resin system.
结果表明，乙酰丙酮钕对体系的固化具有潜伏性促进作用。
The relations of viscosity vs. temperature and gel time vs. temperature of 3233 epoxy resin system are studied.
研究了3233环氧树脂体系的粘度-温度关系、凝胶时间-温度关系、热力学性能、垂直燃烧性能和力学性能。
The title coatings has been prepared by use of melting intercalation technology to introduce the OMMT into epoxy resin system.
利用熔融插层法将有机蒙脱土引入环氧树脂体系，制备出含有纳米分散蒙脱土的无溶剂环氧涂料。
SEM analysis indicated that there was remarkable toughness fracture surface morphology for the epoxy resin system modified with ESBSVP.
SEM结果表明，经ESBSVP改性的环氧树脂体系断面呈现出明显的韧性断裂特征。
From the design of epoxy resin system, two-stage rigidization epoxy resin matrix with thermal induced shape memory property was prepared.
本文制备了可二阶段固化的形状记忆环氧树脂基体，研究了形状记忆环氧树脂及其复合材料的形状记忆特性和力学性能。
The choice of this paper is the epoxy resin and polyethylene polyamine curing system, and glass fiber reinforced epoxy resin system as the damping materials.
本文选择的是环氧树脂和多乙烯多胺固化体系，以及玻璃纤维增强环氧树脂体系作为阻尼层材料。
The latent curing acceleration of the rareearth organometallic compound (MrAn) for the anhydride/epoxy resin system was studied by DSC, TG and rotation viscometer, etc.
结果表明，这种稀土化合物是酸酐／环氧树脂体系较为理想的潜伏性促进剂。
The results showed that the fracture surface of the modified systems displayed tough fracture features, markedly different from that of the unmodified epoxy resin system.
结果表明，增韧后材料的断面形态明显不同于未改性体系的形态，试样冲击断裂面形态具有明显的韧性断裂特征。
This article has reviewed the development and progress of waterborne epoxy resin system at home and abroad, and described its preparation approaches and application fields.
总结了目前国内外水性环氧树脂体系的研究进展，并介绍了水性环氧涂料的制备方法与应用领域。
The distilled water resistance of this system is better than low molecular weight polyamide cured epoxy resin system. This is proved by macroscopic examination and microcosmic AFM analysis.
通过宏观试验和AFM微观分析证明，改性酚醛胺固化环氧树脂体系的耐蒸馏水性能，优于低分子聚酰胺固化的环氧树脂体系。
The preparation methods of waterborne epoxy resin, the kinds of waterborne curing agents and the methods for choosing auxiliary, pigments and fillings in the system were introduced.
介绍了该体系中水性环氧树脂的制备方法、水性固化剂的种类以及助剂和颜填料的选择方法。
Through applying a liquid modified aromatic amine as curing agent for epoxy resin, a high performance resin matrix system for resin transfer moulding (RTM) was derived.
选用一种液体改性芳香胺为环氧树脂的固化剂，得到了一种适合于树脂传递模塑(rtm)的高性能树脂体系。
The main hydration products in the system are C-S-H gel and micro-crystal hydrated calcium aluminate. When epoxy resin is solidified, the organism is network.
体系中水泥水化的主要产物为C - S -H凝胶和水化铝酸钙，而且水化产物多为凝胶体和微细晶体，环氧树脂固化后，有机物呈网络胶状体。
A system of epoxy resin reinforced with nylon strap and polyurethane resin suitable to the wrapping cover technology for the synthetic fiber fabric was introduced.
介绍了一种适合纤维织物缠绕包复工艺的尼龙带增强环氧和聚氨酯包复体系。
The resin system applicable for the equipment includes epoxy, phenolic, polyurethane and other two-component or single-component resin system.
该设备适用的树脂体系包括环氧、酚醛、聚氨酯等双组分或单组分树脂体系。
The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.
采用环氧树脂-DDS固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。
New HLX-1 resin Curometer has been designed and built, by which the curing conditions of T31-epoxy resin E51 system was optimized.
在新设计制造的HLX - 1型树脂固化仪上对t _(31) -环氧树脂e51进行了最佳配方和最佳条件的选择。
The toughening efficiency was related to morphology, chemical bonding and epoxy resin matrix deformation of the system.
增韧效果与体系的相态结构、化学键合和环氧基体的延展性有关。
The aperance and the mechanic properties of epoxy resin and low molecular polyamide adhesive system would be affected by the addition of mannich amide.
在低分子聚酰胺树脂固化环氧树脂的体系中 ，通过添加一定量的酚醛胺固化剂 ，直接影响该体系的表观及固化物力学性能。
In this paper the effect of size of silver particles, proportion, curing agent and curing condition on epoxy resin - low - molecular polyamide - silver particles system are studied and discussed.
本文着重从银粉的粒度、添加量和固化剂的种类、用量以及固化条件等方面研究和探讨了环氧-低分子聚酰胺-银粉导电胶体系的导电性及强度。
Hydrophilic groups were introduced onto E-51 epoxy resin by chemical modification method to prepare epoxy resin aqueous system.
利用化学改性法将亲水性基团引入E -51环氧树脂链上，经冰乙酸成盐并加水制备改性树脂水性体系。
Hydrophilic groups were introduced onto E-51 epoxy resin by chemical modification method to prepare epoxy resin aqueous system.
利用化学改性法将亲水性基团引入E -51环氧树脂链上，经冰乙酸成盐并加水制备改性树脂水性体系。
应用推荐