4-dioxane is a byproduct of a chemical processing technique called ethoxylation, in which cosmetic ingredients are processed with ethylene oxide.
4 -二恶烷是一个叫做乙氧基化的化学加工过程的副产品,在这个过程中,化妆品原料和环氧乙烷一起进行处理。
Broad prospects of extension processing of ethylene oxide (EO) are presented.
环氧乙烷(EO)后加工具有广阔的发展前景。
The production and demand situations of ethylene oxide at home and abroad were summarized.
综述了国内外环氧乙烷生产与需求状况;
A model was established for ethylene consumption in air oxidation process of ethylene to ethylene oxide.
本文推导了空气法乙烯氧化制环氧乙烷工艺的乙烯单耗数学模型及四个约束条件。
Ethanolamine and its derivative di-and triethanolamine result from reacting ammonia with ethylene oxide.
乙醇胺及其衍生物二乙醇胺和三乙醇胺由氨与环氧乙烷反应所得。
A new hydration process of water and ethylene oxide by reaction distillation to produce glycol in high pressure was studied.
对反应蒸馏法水合环氧乙烷生产乙二醇的工艺进行了模拟。
Using the all closed covering low-temperature method, we successfully made the packaging and sampling of ethylene oxide standard.
采取全封闭覆盖低温法进行环氧乙烷标准品的分装、取样。
Etherification of methanol with ethylene oxide (EO) was investigated systematically on the pillared rare earth solid acid catalyst.
全面系统地考察了在层柱稀土固体酸催化剂上甲醇和环氧乙烷醚化反应。
Water soluble hydroxyethyl chitin which has high etherification degree can be received by the gas-solid reaction with ethylene oxide.
羟乙基甲壳素是甲壳素的一种水溶性醚化产物,采用气固相制备方法可以得到水溶性好、醚化度高的羟乙基甲壳素。
Water soluble hydroxyethyl chitin which has high etherification degree can be obtained by the gas-solid reaction with ethylene oxide.
羟乙基甲壳素是甲壳素的一种水溶性醚化产物,采用气固相制备方法可以得到醚化度高、水溶性好的羟乙基甲壳素。
No, sterilization processes such as ethylene oxide, radiation and steam sterilization will damage the components and should not be used.
不可以。用环氧乙烷、放射线照射和高温高压蒸气的消毒方法会损害部件,不应使用。
The optimum conditions for synthesis of ethylene glycol phenyl ether are as follows: the substance ratio of phenol to ethylene oxide is 1.
采用带夹套的静态混合器作为苯酚加成环氧乙烷的管式反应器,在无机碱或有机碱的作用下连续生产乙二醇苯醚。
The polymerization of ethylene oxide was carried out with catalysts of many components whose main components were organometallic compounds.
采用有机金属化合物为主体的多组分催化剂进行环氧乙烷的聚合试验。
The deactivation kinetics equations of ethylene oxide synthesis silver catalyst were obtained from the calculation of real industrial data.
根据工业实际生产数据反算得到能够反映催化剂失活特性的银催化剂失活动力学方程。
They provide fast, automated emergency shut-off of loading an dunloading valves for handling very hazardous chemicals, such as chlorine or ethylene oxide.
在进行涉及液氯和环氧乙烷之类高度危险性的化学品操作时,这种装置能够对装卸用的阀门进行快速、自动化的紧急切断。
A new technology to produce hydroxy ethyl ethylene diamine using ethylene oxide is introduced in this paper. Its properties and application fields are also listed.
本文介绍了一种用环氧乙烷生产羟已基乙二胺的新技术,列举了羟乙基乙二胺的性能及应用范围。
Based on the process principle, equipment, safety and economic analysis, options for ethylene oxide (EO) storage tank operating at variable pressures are put forward.
本文从工艺原理、设备、安全及经济分析方面,提出环氧乙烷贮罐变压运行的方案。
This paper describes the experiment of producing ethylene oxide (EO) by using ethylene recovered from catalytic cracking dry gas in the presence of ys silver catalyst.
叙述了在YS型银催化剂作用下,利用催化裂化于气回收的乙烯制备环氧乙烷的实验研究。
Method: The ethylene oxide residual quantity of various components in single-use curette set for induced abortion was tested by automated headspace-gas chromatography.
方法:采用顶空气相色谱法测定一次性使用诊刮人流术器械包中不同组分环氧乙烷残留量。
Sum in weight percent all the impurities found: water, acidity, carbon dioxide and aldehydes and subtract from 100.0 percent to obtain the percent by weight ethylene oxide.
用100%减去所发现的所有杂质重量百分数之和,包括水、酸、二氧化碳和醛类,即为环氧乙烷的重量百分比。
Poly (propylene oxide-ethylene oxide) containing ether linkage was used to make complexes with stannic oxide sol, thus producing a kind of anti-static agent for nylon resins.
通过以含醚键的聚(氧化丙烯-氧化乙烯)为主体,与二氧化锡溶胶复合,制备了一类可用于尼龙的抗静电剂。
The reactor of ethylene oxide prepared by ethylene oxidation was simulated by one-dimension and two-dimension models. The simulation results were coincident with the industrial data.
用一维和二维数学模型模拟了乙烯氧化制环氧乙烷反应器,模拟结果与工业实际生产的数据吻合较好。
The synthesis of poly(ethylene oxide)(PEO) montmorillonite composite by direct melt intercalation of polymer powders in layered silicates is studied by using XRD, IR, DSC and SEM, etc.
用XRD、IR、DSC和SEM等分析方法研究了聚合物粉末直接熔融嵌入合成聚氧乙烯(PEO)-蒙脱石夹层复合材料的过程。
Poly(ethylene oxide)(PEO) hydrogel films formed by electron beam (EB) irradiation were prepared as wound dressing. The physiochemical properties of the PEO hydrogel films were evaluated.
研究应用电子束照射聚氧化乙烯(PEO)所形成的水凝胶膜的制备,并对这些可作为伤口敷料的水凝胶膜的理化特性进行了评价。
Reaction of lower primary alcohol and ethylene oxide was studied by zinc perchlorate as catalyst, and the products are narrow distributed. The suitable process conditions have been established.
以高氯酸锌为催化剂,环氧乙烷和低碳醇反应生成窄分子量分布的乙二醇单低碳醇醚,确定了适宜的工艺条件。
The commonly used methods of sterilization are: dry-heat sterilization, moist-dry sterilization, radiation sterilization, UV sterilization, ethylene oxide sterilization and ozone sterilization.
常见灭菌的方法基本上为以下几种:干热灭菌法、湿热灭菌法、辐射灭菌法、紫外线灭菌法、环氧乙烷灭菌法、臭氧灭菌法。
When ethylene oxide reaches specified density and time, the indication ink on the indication label changes color from red to blue, so as to judge whether sterilization reach the preset standard.
当环氧乙烷气体达到规定浓度和时间的时候,指示标签上的指示油墨由原来的红色变为兰色,从而判断灭菌是否达到预定要求。
Trace water in the initiator system is an important factor which affects the initiating terminal group structure and the performance of the random copolymer of ethylene oxide and propylene oxide.
引发体系中的微量水分是影响环氧乙烷环氧丙烷无规聚醚起始端基结构,并进一步影响其分子量和使用性能的重要因素。
Ethanolamines are commonly made by the method of reacting aqueous ammonia and ethylene oxide. Product profile, product quality and energy consumption are three key factors in ethanolamine process.
环氧乙烷氨解法是目前生产乙醇胺的主要方法,产品比例、产品质量及能耗是乙醇胺生产中的三个关键因素。
Ethanolamines are commonly made by the method of reacting aqueous ammonia and ethylene oxide. Product profile, product quality and energy consumption are three key factors in ethanolamine process.
环氧乙烷氨解法是目前生产乙醇胺的主要方法,产品比例、产品质量及能耗是乙醇胺生产中的三个关键因素。
应用推荐