The US figure would translate to a quarter-on-quarter expansion rate of about 0.8%.
美国的数据若转化为季度环比,则增速为0.8%左右。
Note that the present age of the universe follows from the expansion history and present expansion rate.
请注意,目前的宇宙年龄是由宇宙当前的膨胀速率所估计的。
For decades physicists were convinced that gravity should be causing the expansion rate of the universe to slow.
几十年来,物理学家们一直相信万有引力应该使宇宙的膨胀速度慢下来。
Keck is helping astronomers determine the age of the universe and its expansion rate as well as allowing them to watch the birth of stars in other galaxies.
凯克能帮助天文学家探测宇宙的年龄和膨胀的速度,并观测其他星系中恒星的诞生。
The qualities of extrusion products include some physical and nutritional characteristics, for example, expansion rate, water absorption, texture, etc.
膨化产品质量的评价指标包括膨化率、吸水性和质构等物性指标,以及产品的营养成分。
Accuracy: dimensional stability, low mold shrinkage, low thermal expansion rate.
精确度:尺寸稳定性极佳,模塑收缩率低,热膨胀率低。
The more the magnesia replaces the cement, the greater expansion rate of the cement mortar is.
轻烧氧化镁掺量越大,水泥砂浆的膨胀率越大。
Numerical simulation of expansion rate on two-phase wet steam flow with spontaneous condensation;
对存在自发凝结的湿蒸汽两相流动建立了完全欧拉坐标系下的数值模型。
The relative expansion rate(RER)of leaves increases at the EG phase, but gradually reduces at the LSG and SCG phases.
叶片相对扩展速率(RER)在指数生长阶段迅速增加,但在线性生长和稳定生长阶段则逐渐减小。
To improve the volume expansion rate, lower the density of pp foam, gas escaping should be avoided by selecting the appropriate die temperature.
优选适宜的发泡机头温度可以抑制气体逃逸,提高发泡倍率,获得更低密度的聚丙烯发泡材料。
Conclusion When excessive expansion is performed, BTXA can accelerate the expansion rate and improve the blood supply of expanded myocutaneous flaps.
结论肌皮瓣超量扩张时,BTXA可加快肌皮瓣扩张速度,同时改善肌皮瓣血运。
Using advanced TMCP technology, Baosteel's hot-rolled pickled strip for high hole expansion has high expansion rate and excellent forming and welding properties.
宝钢高扩孔用热轧酸洗钢带是采用先进的控轧控冷技术生产的具有高的扩孔率、优良的成形性能和焊接性能。
Using tri-functionality polyoxytrimethylene alcohol ether and polyethylene glycol, synthetize polyurethane elastomer with water absorption expansion rate of0~200%.
采用三官能度的聚氧化丙烯醚醇、聚乙二醇,合成了吸水膨胀率在0~200%的聚氨酯弹性体。
The factors influencing the corrosion depth including the porous volume of concrete, thickness of concrete cover, diameter of rebar and the corrosion expansion rate are analyzed.
分析了影响混凝土保护层胀裂时钢筋锈蚀深度的各个因素,包括混凝土水泥石毛细孔的体积、混凝土保护层的厚度、钢筋直径和铁锈膨胀率。
Objective to evaluate extreme expansion rate and the changes of ultramicrostructure of extremely expanded skin so as to optimize the technology of skin and soft tissue expansion.
目的探讨皮肤的极限扩张率及极限扩张后皮肤超微结构的变化特征,以进一步优化皮肤软组织扩张技术。
USES material not qualified. Such as sand, stone, aggregate quality unqualified; In addition, mostly because cement volume expansion rate is too large (stability serious adverse).
所用材料不合格。如砂、石、集料质量不合格;除此之外,大多数是因为水泥体积膨胀率太大(安定性严重不良)。
In this paper, the effects of calcination temperature, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.
研究了白云石的煅烧温度、保温时间以及掺量等对水泥物理性能和膨胀行为的影响规律。
Systematic physio-mechanical properties test and analysis, especially analysis of relationship between expansion rate, dry density, water content, and overlying pressure, are carried out.
本项工作系统地进行了膨胀土的物理-力学性质试验及分析,尤其是膨胀率与干容重和含水量及外覆压力关系分析。
Gives the comparative analysis of index expansion rate, creation time and search response speed by experiment, the result shows that this technique improves the index space and time efficiency.
通过实验,对索引膨胀率、创建时间和检索响应速度进行了对比分析,表明该技术提高了索引的空间与时间效率。
Compared with the barrel temperature, the material moisture shows more influence on the torque, the 5th zone pressure, the expansion rate, and the product moisture, except the 4th zone pressure.
加工温度对第4区压力影响较大;物料含水量对扭矩、第5区压力、产品膨化率和含水量影响较大。
Within the designed range, the temperature and material moisture influences on the torque, the 4th zone pressure, the 5th zone pressure, the expansion rate, and the product moisture are significant.
结果表明,在试验设计的加工温度和物料含水量范围内,加工温度和物料含水量对螺杆扭矩、第4区压力、第5区压力、产品膨化率和含水量都有极显著影响。
Within the designed range, the temperature and material moisture influences on the torque, the 4th zone pressure, the 5th zone pressure, the expansion rate, and the product moisture are significant.
结果表明,在试验设计的加工温度和物料含水量范围内,加工温度和物料含水量对螺杆扭矩、第4区压力、第5区压力、产品膨化率和含水量都有极显著影响。
应用推荐