This innovative machine has been designed to process materials that cannot be handled by traditional methods such as a twin-screw extruder.
设计这种创新性的机器是为了加工那些无法用传统方法(如双螺杆挤出机)处理的材料。
I want a Teflon extruder for making Teflon wire.
我想要铁氟龙押出机,做铁氟龙极细线。
The driving system is an important part of twin-screw extruder.
传动系统是双螺杆挤出机的一个重要部分。
The design of the melting zone for extruder screw was optimized.
讨论了挤出机螺杆熔融段的优化设计问题。
Familiar with maintenance of compound extruder and autoclave equipment.
熟悉橡胶挤出机,硫化设备维护。
Use reducer special for plastic extruder with alloy hard - toothed surface.
采用合金硬齿面塑料挤出机专用减速机。
The optimal design for metering section of extruder screw was investigated.
讨论了挤出机螺杆计量段的优化设计问题。
In the control system of new design tri-extruder, adopted PROFIBUS-DP network.
在新设计的三复合挤出机控制系统中,采用了PROFIBUS - DP网络。
But nothing goes through the extruder that doesn't go through the feed throat first.
但是,不先通过喂料口,就没有什么东西通过挤出机。
A series silane grafted polyethylenes were prepared by using the twin screw extruder.
以双螺杆挤出机为反应器,制备了一系列硅烷接枝聚乙烯。
The optimal design of Moddock barrier mixing element on extruder screw was investigated.
研究挤出机螺杆直槽式屏障混炼元件的优化设计问题。
The main products are Laying-up machines, stranding machines, extruder machines and so on.
主要产品有成缆机系列、绞线机系列、挤出机系列等。
Well functioning co-extruder can be controlled either separately or linked with main machine.
高性能共挤机可以单独控制,也可以与主机联动控制。
In an earlier column I discussed feed throat design and how it can affect extruder performance.
在早期的专栏里,我讨论过喂料口(管)设计,以及它是如何影响挤出机的性能的。
Twin screw extruder is one of the important equipment in biodegradable starch plastic processing.
双螺杆挤出机是目前生物降解淀粉塑料加工生产中的重要设备之一。
The extruder should be adjusted after installation according strictly to the process and demands.
安装挤出机时要严格遵守安装工艺及要求,安装完后要认真调试。
In this paper, power consumption of the extruding zone in conical twin-screw extruder was studied.
本文旨在对锥形双螺杆挤出机挤出过程中挤出段的功率消耗进行研究。
Modular system, combination of single-shaft cutter and extruder. No pre-cutting equipment required.
组合式系统整合单轴切碎机和挤塑机,无须配备预切设备。
A method for accurately measuring the extruder output by means of weight-loss metering is presented.
提出了一种用失重计量方式来实现挤出机生产率精确测量的方法。
The possibility of the application of extruder in the field of starch further-processing was studied.
探讨了挤压机在淀粉深加工领域中应用的可能性。
It was studied that ABS was grafted by MAH, using DTBP as initiator, and reacted in twin-screw extruder.
以二叔丁基过氧化物(DTBP)为引发剂,在反应型双螺杆挤出机中进行ABS接枝马来酸酐的研究。
To increase the strength of extrusion cylinder for large extruder, we need use multi-shrinking structure.
大型挤压机用圆挤压筒一般都采用组合式结构以提高其强度。
The screw of twin-screw plastic extruder is complex, its structure and parameters determine extrusion process.
双螺杆塑料挤出机中的螺杆较为复杂,螺杆的结构和参数对挤出过程起决定作用。
Rubber insulation material foam production equipment including stoves, extruder, mixer and open chain machines.
橡塑保温材料的生产设备主要包括发泡炉、挤出机、密炼机和开炼机等设备。
As the key component of extruder, the structure of screw rod has a great effect on the characters of puffed materials.
作为挤压膨化机关键部件的螺杆,其结构对膨化物料的性状有着十分重要的影响。
Dynamic - vulcanization PP composites were prepared with twin - screw extruder and dynamic - vulcanization technology.
用双螺杆挤出机和动态硫化技术制备出了综合力学性能好、熔体强度高的聚丙烯复合材料。
A reciprocating screw injection molding machine combines the functions of an extruder and a compressive molding press.
往复螺旋注射成型机把压出机和成型压力机的功能结合起来。
However, the original feed control system of the extruder is obvious aging, out-of date and time-consuming in feeding.
原挤压机进料控制系统已明显老化、落后,进料耗时长、进料精度和可靠性得不到保证。
The paper talks on the necessity, possibility and design ideas of multifunction and modularization for vacuum extruder.
本文探讨了多功能、积木式、模块化真空挤出机的必要性、可行性及设计思路。
The paper talks on the necessity, possibility and design ideas of multifunction and modularization for vacuum extruder.
本文探讨了多功能、积木式、模块化真空挤出机的必要性、可行性及设计思路。
应用推荐