Applying the deep rolling depression technology to engine crankshaft fillets can greatly improve their fatigue strength.
发动机曲轴圆角采用深滚压工艺可大幅提高曲轴疲劳强度。
Ultrasonic impact treatment (UIT) is an effective and convenient method to enhance the fatigue strength of welded joints and suchlike structures.
与传统的改善结构疲劳性能的焊后处理措施相比,超声冲击处理是一种既高效又便捷的较为理想的工艺方法。
Materials with greater fatigue strength can generate greater force over the same number of cycles, or can last longer at the same amount of force.
具有较大疲劳强度的材料在相同的循环数下可以产生更大的力,或者在相同的作用力下可以持续更长的时间。
The thesis researched the wheelset and axle-box fatigue strength of CRH_2 trailer and expected that the results could be valuable for establishing the standards of high-speed EMU.
论文以CRH_2动车组拖车轮对和轴箱为研究对象,进行疲劳强度计算分析,以期望为我国高速动车组标准的制定提供依据。
The fatigue strength of ADI was described.
论述了ADI的疲劳强度。
The fatigue strength of the structure is checked.
校核了结构的疲劳强度。
P Prestressing tendons shall have adequate fatigue strength.
钢筋必须有足够的疲劳强度。
Then, the fatigue strength analysis of K-joint is carried out.
然后对管节点进行了疲劳强度分析。
It shows that fatigue strength of bolt can be improved by use of elastic cell.
有力说明了利用弹性元件可以达到提高螺栓疲劳强度的目的。
A reliability design method is presented for fatigue strength of turbine blades.
本文提出了透平叶片疲劳强度的可靠性设计方法。
Besides, localized decarburation of leaf spring also spoiled its fatigue strength.
另外,弹簧表面局部区域存在脱碳,降低了材料的疲劳强度。
P Where fatigue strength is required it shall be verified in accordance with en 10080.
当对疲劳强度有要求时,必须按照EN 10080进行检验。
Casting defects, especially porosity, will reduce fatigue strength of the crank-shaft.
铸造缺陷,尤其是铸造缩松,降低了曲轴的疲劳强度。
Then recommended values in fatigue strength design of ordinary steel bar are proposed.
并且给出了相应应力比下普通钢筋的疲劳设计强度建议值。
We must improve fatigue strength of elements in saw chain for prolonging lifetime of saw chain.
要提高锯链的使用寿命,必须提高锯链零件的疲劳强度。
Cold form tapping process is an effective method to enhance fatigue strength of internal thread.
内螺纹冷挤压成形是提高内螺纹疲劳强度的有效方法。
The rotating bending fatigue strength is the criterion of resistance to propagation of hot cracks.
旋转弯曲疲劳强度是抗裂纹扩展能力的判据。
The fatigue strength property is very important in the application period for filtration material.
耐疲劳强度特性在过滤材料的使用期间是非常重要的一项性能。
Design method to enhance fatigue strength of a dome is given without increase of total cylinder mass.
在不增加气瓶总质量的情况下,得到了提高封头疲劳强度的设计方法。
Designs o? The closed soft surface gear transmissions are generally restricted by the contact fatigue strength.
闭式软齿面齿轮传动设计中,常受齿面接触疲劳强度的限制。
The fatigue strength of commercial purity titanium was improved through shot peening or cold rolling treatment.
工业纯钛经喷丸、滚压强化后,疲劳强度得到不同程度的提高。
Stress index method and fatigue strength weakened coefficient method are important methods for designing fatigue vessel.
应力指数法和疲劳强度减弱系数法是进行疲劳容器设计的重要方法。
By analyzing the force applied on the tubing, the tensile strength and anti-fatigue strength of the tubing are calibrated.
通过对油管的受力分析,校核偏磨油管的抗拉强度和抗疲劳强度。
A kind of method to evaluate and test the tension-compression fatigue strength of gray cast iron was introduced in this paper.
介绍了一种评价与测试灰铸铁铸件的拉压疲劳极限的方法。
The result shows that the fatigue strength and the fatigue life decrease greatly with the increase of the survival probability.
结果表明,当存活概率提高时,疲劳强度将明显降低,疲劳寿命将明显缩短。
It's a new method to increase fatigue strength of welded joints and structure by peening toe of weld with ultrasonic peening equipment.
使用超声波冲击焊趾来提高焊接接头及结构的疲劳强度,是一种国际上刚刚出现的新方法。
This paper analyses and studies the effect of residual stresses on static strength, stability, and fatigue strength of the steel members.
文章就钢构件中的残余应力对钢构件的静力强度、稳定性及疲劳性能的影响进行了分析和研究。
It is a new method to increasing fatigue strength of welded joints and structure by peening welded toes with ultrasonic peening equipment.
使用超声波冲击焊趾来提高焊接接头及结构的疲劳强度,是国际上刚刚出现的一种新方法。
It is a new method to increasing fatigue strength of welded joints and structure by peening welded toes with ultrasonic peening equipment.
使用超声波冲击焊趾来提高焊接接头及结构的疲劳强度,是国际上刚刚出现的一种新方法。
应用推荐