The property of the near field subwavelength imaging in a metal thin-film structure is investigated using finite difference time domain method based on Drude model.
采用基于等离子体物理模型的时域有限差分方法模拟了金属薄膜近场成像特性；采用薄膜传输矩阵方法计算了金属薄膜对倏逝波分量的放大作用。
Dendrite growth has been simulated with the phase field method and finite difference schemes on a two dimensional rectangular domain with a uniform square mesh.
采用相场模型和有限差分方法，模拟了过冷纯金属熔体的枝晶生长，计算区域为二维正方形均匀网格。
Using the finite element method software ANSYS, the stator temperature field of the hydroelectric generator is analyzed and calculated, the corresponding temperature field picture is given.
在此基础上应用有限元法的通用软件ANSYS，对大型水轮发电机定子温度场进行分析与计算，绘制了相应温度场图。
The near field distribution of uncoated and metal coated fiber optic probes were characterized by the method of three dimensional finite difference time domain (FDTD).
采用三维时间域有限差分（FDTD）方法研究了扫描近场光学显微镜中光纤微探针的近场分布特性。
The results of transient temperature field calculated by finite difference method and ANSYS software agree with the experimental results.
高压氮气淬冷温度场的有限差分法计算结果和ANSYS有限元分析软件计算结果与实测结果吻合较好。
Numerical solution is given to mathematical model of formation temperature field by full implicit finite difference method.
并利用有限差分方法，对温度场数学模型进行数值求解。
Firstly, the influence of width of water body and height of water level to vibration property of structure was calculated, according to the finite field addition mass method.
首先，按有限域内附加质量方法计算了不同水体宽度、不同水位高度等对结构自振特性的影响。
Finite Difference Method (FDM) is usually used for calculating the temperature field of casting solidification processes.
有限差分方法是凝固过程温度场解析的常用数值计算方法。
Finite element difference method was used to simulate the temperature field of work piece during TSCR.
采用有限元差分法对连铸连轧生产过程的带钢温度场进行模拟。
The acoustical wave equation is presented a serial spatial and time iterative equations and room acoustics field is simulated using finite difference time domain method.
时域有限差分法将声波基本方程表示为一个时间和空间的迭代方程组，实现对室内声场中低频段的模拟计算。
Using the finite differential method we calculate the temperature field and frozen depth of pavement proper when the road is freezing by degrees with moisture migration.
采用有限差分方法，完成了土基冻结逐渐进行且伴随有湿迁移的路面体温度场的计算和冻结深度的确定。
The flow field in this reactor was computed by means of finite difference method.
运用有限差分法计算了这种反应器内部的流场。
The calculation is performed by finite volume method, and fluid field distribution is obtained.
采用有限体积元法对计算区域进行迭代计算，并得到了流场的分布。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
按测量结果，确定了一个合理的边界条件，用有限元法模拟计算了沿轴场分布。
This paper used the finite element method to compute the temperature field, and combined finite element with analytic solution to develop a calculation of thermal stresses.
本文采用有限元数值分析方法计算多层圆管的温度场，并把解析解与有限元相结合，提出一种求解其热应力的计算方法。
The initial guess field is provided by finite element method.
预备场是由有限元法提供的。
Finite element method is used to study stress and place moving field inside the structure and electric measure method is utilized to verify the result of calculation.
利用有限元方法对该结构内部的应力场和位移场进行了研究。
To design the magnet structure, finite element method is used to analyze the permanent magnetic field.
在磁体结构设计中，本文采用有限元软件分别对单、双环形永磁结构进行了分析计算。
A numerical method, namely finite network method, is used to analyze a simulation field of electric network based on experimental method of network simulation field.
根据电网络模拟场的实验方法，本文提出了一种电路网络模拟场的数值分析方法，即有限网络法。
The force state of perforation tube string for testing of oil is analyzed with the finite clearance element method, and the field applied examples prove its reliability and veracity.
用此方法对试油测试射孔管柱的受力状态进行了分析，并通过现场应用实例证明了此方法的可靠性和准确性。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
The magnetic field distribution of one apparatus is evaluated by finite element method to well coincide with the measurements.
采用有限元方法对一套装置的磁场进行了计算，磁翅果与测量值吻合较好。
Using the finite difference method we calculate the distribution of the electromagnetic field.
利用有限差分法实现了其正演计算，获得了电磁场的分布。
Two methods considering dynamic water pressure in ANSYS were studied, which were finite field addition mass method and sequence weak coupling solving method.
重点研究了在ANSYS中考虑动水压力的两种方法，即有限域内附加质量法和顺序弱耦合算法。
In this paper, temperature and stress field on the bottom had been simulated using finite element method.
本文运用有限单元法，对钢包底的温度场和应力场进行了数值模拟。
Among the numerical simulation methods, the finite element method (FEM) is widely to solve the electric field with complex structure and multi-dielectric medium with high precision.
在常用数值求解方法中，有限元法以其通用性强，适用于结构复杂、多重介质复杂场域求解，且求解精度高等优点而被广泛用于电器电场的数值求解。
The crack tip stress-strain field of elastic-plastic materials are analysed by finite element method in the plane stress condition.
用有限元方法对平面应力条件下弹塑性材料的裂纹尖端应力应变场进行了计算。
Using enthalpy to deal with latent heat of solidification the numerical model is solved by finite element method, and a steady temperature field can be obtained under a certain condition.
在此基础上采用有限单元方法数值求解模型，并运用热焓法处理凝固潜热，得到了一定工艺条件下的稳态凝固温度场。
The fundamental equations in finite element method for unsteady temperature field elastic plane problem are derived on the bases of variational principle of coupled thermoelastic problems.
在耦合热弹性问题变分原理的基础上，导出非定常温度场热弹性平面问题的有限元法基本方程。
The fundamental equations in finite element method for unsteady temperature field elastic plane problem are derived on the bases of variational principle of coupled thermoelastic problems.
在耦合热弹性问题变分原理的基础上，导出非定常温度场热弹性平面问题的有限元法基本方程。
应用推荐