Finally, in finite element analysis software MSC.
最后，在有限元分析软件MSC。
Experimental results verify the correctness of the finite element analysis results.
实验分析结果验证了有限元分析的正确性。
At the same time, the finite element analysis of metallic mirror model is also presented.
同时给出了金属反射镜有限元分析模型。
And ANSYS is a large scale general finite element analysis software with abroad application.
而ANSYS是得到广泛应用的大型通用有限元分析软件。
The up-to-date research progress of the finite element analysis of soil cutting is reviewed.
阐述了用有限元法分析土壤切削问题的研究进展情况。
The correct weak form of basic equations in elasticity is the foundation of finite element analysis.
弹性力学基本方程正确的弱形式将是有限元分析的基础。
Finally, a series of conclusions significant to the finite element analysis for the connecting rod are given.
文中给出了连杆有限元分析的一系列结论。
Mesh generating is a necessary procedure between geometric definition of part and its finite element analysis.
有限元网格生成是零件几何定义和有限元分析之间必不可少的步骤。
To examine the monitoring results, the finite element analysis is used to calculate the effect between jacked piles and soil.
为了测斜仪技术检验监测结果的准确性，采用有限元分析方法计算静压桩与土的相互作用效果。
Three-dimensional finite element analysis of the stress of the mandible premolar under loading on its traumatic occlusal spots.
下颌前磨牙创伤咬合点加载的三维有限元应力分析。
In this paper, the mode character of MWM395 engine block is analyzed with the finite element analysis on the platform of I DEAS.
本文应用有限元法在I - DEAS软件平台上对MWM395柴油机机体进行了模态分析。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
This paper focuses on the use of finite element analysis software, the threshing cylinder axis static finite element analysis process.
为此，着重研究了利用有限元分析软件对脱粒滚筒轴进行有限元静力分析的过程。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
The finite element analysis showed that the normal stress distribution of the grillage wall was about the same as that of the solid wall.
有限元计算表明，网格墙在轴力和水平力作用下的正应力分布与实体墙总体上一致；
In this thesis based on engineering examples, some Suggestions were put forward to control crack by finite element analysis of floor slabs.
本文结合工程实例，对楼板的温度裂缝进行了有限元分析，并提出了一些预防裂缝的建议。
Based on the results of finite element analysis, it indicates that the analysis has a good precision and gains coincident conclusion with the test.
结果表明有限元分析具有较好的精度，与试验分析有一致的规律。
This paper deals with the necessary procedures and noticeable problems of the staged - calculation method in the structure finite element analysis.
本文讨论实现分阶段计算方法的具体措施和应该注意的问题。
The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.
分析结果显示，将基于有限元分析的优化技术应用于非标零件的设计是一种非常可行的方法。
This method takes advantage of the dynamic simulation function of finite element analysis and the thermodynamic theory to calculate the value of thermal flux.
该方法利用动力学分析功能，结合传热学原理求解热流传递数值；
Program design: to work out a utility analysis Program is the absolutely necessarily tache of finite element analysis, and also is this discourse's finally aim.
程序编制：编制出实用的分析程序是有限元分析课题必不可少的环节，也是本文的最终目的。
Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
Under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ANSYS.
建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ANSYS有限元分析软件计算了负重轮的应力应变分布。
The seismic capacity of the box-shaped joint in the reinforced concrete mega-frame structure system is studied, and the finite element analysis is done with ANSYS .
本文对钢筋混凝土巨型框架结构箱形节点抗震性能进行了试验研究及ANSYS程序有限元分析。
Based on the results of experiment and finite element analysis, the shear strength and the effect of reinforcement of the perforated brick walls are also discussed.
本文还根据试验结果和有限元法分析，探讨了空心砖墙的抗剪强度和横向、纵向配筋效应。
A finite element analysis demonstrated that minimizing bone and ligament removal resulted in greater preservation of normal motion of the lumbar spine after surgery32.
有限元分析证实，最低程度的切除骨和韧带能够更大程度的保留术后腰椎正常活动范围32。
A finite element analysis demonstrated that minimizing bone and ligament removal resulted in greater preservation of normal motion of the lumbar spine after surgery32.
有限元分析证实，最低程度的切除骨和韧带能够更大程度的保留术后腰椎正常活动范围32。
应用推荐