A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
建立了热过程的数学模型，并采用有限元等数值方法模拟其热过程。
In order to analyze the rules of head width reduction of slab during side pressing, a finite element model was established by method of numerical simulation.
为了分析定宽过程中板坯头部失宽的变化规律，利用数值模拟的方法建立了板坯侧压的有限元模型。
The paper provides the mathematical model of numerical simulation for metal surface hardened by plasma-arc with finite element method.
给出了用有限元方法对金属材料等离子体弧金属表面强化处理过程数值模拟的数学模型。
A numerical model calculating displacement of jointed slab on void foundation is established with finite element method.
用有限单元法建立了可考虑接缝和地基脱空的弹性地基板位移计算模型。
Using enthalpy to deal with latent heat of solidification the numerical model is solved by finite element method, and a steady temperature field can be obtained under a certain condition.
在此基础上采用有限单元方法数值求解模型，并运用热焓法处理凝固潜热，得到了一定工艺条件下的稳态凝固温度场。
An efficient numerical method for simultaneously updating mass matrix and stiffness matrix of a finite element analytical model based on incomplete modal data measured is presented.
提出一种基于不完全模态测量数据同时修正有限元质量矩阵与刚度矩阵的有效数值方法。
A numerical model, based on the finite element method, is established to describe a fluid flow in a deforming saturated oil reservoir.
利用有限元方法，建立了一个描述可变形饱和储层中流体流动的数值模型。
Numerical model for RTM process analysis is established by finite element method, and its calculation method is given.
本文建立了利用有限元法进行RTM工艺分析的数学模型，并给出了具体的计算方法。
In this paper, we discuss the numerical modeling of complex resistivity anomalies for Cole-Cole dispersion model by the Finite Element Method (FEM).
本文研究了用有限元数值方法模拟柯尔—柯尔复电阻率模型异常规律的问题。
The numerical model of one-dimensional solute transport through unsaturated soils is formulated by characteristic finite element method.
建立了一维非饱和土壤中溶质运移的特征有限元数值模型。
The numerical model of one-dimensional vertical water infiltration through unsaturated soils is constructed by characteristic finite element method.
建立了一维非饱和土壤水分垂向入渗的特征有限元数值模型。
According to practical working situation, nonlinear dynamic finite element method is adopted to establish a numerical model of combined breaking rock with high pressure water jet and mechanical bit.
采用非线性动态有限元法，结合实际工况条件，建立了高压水射流—机械齿联合破岩的数值模型。
The results of numerical computation of finite element method and analogy model test of electric resistance network also indicate the serious effect of anisotropy on the position of saturation line.
有限元计算和电阻网模型试验的结果也表明，坝的各向异性对浸润线的位置有较大的影响。
The properties of the moment can be obtained from model tests and computations, Two numerical methods, finite element method and boundary integral method, are introduced.
介绍了水力矩实验装置及水力矩的两种数值方法：有限元法和积分方程法。
From the theory presented, the numerical solutions were obtained by means of beam finite element method and the results were checked by model tests.
按照本理论已用梁有限元法求得数值解，结果还用模型试验作了检验。
Based on the computing model of this paper, the numerical results of finite element method are in better agreement with its experiment results.
计算模型的有限元法数值结果与实验值较好符合。
Firstly, an FEM (Finite Element Method) numerical model of single magnetic unit is set up, then magnetic field distributions under different working conditions are solved by ANSYS software.
本文首先运用有限元方法对机器人爬行小车的履带磁吸附单元建立了数学模型，并通过ANSYS软件进行了磁场求解，得出不同运动情况下的磁场分布；
The accuracy of the proposed method is demonstrated with the displacement-controlled finite element numerical analysis and existing centrifuge model tests.
结合位移控制有限元数值模拟和既有离心模型试验结果进行对比分析，验证该方法的有效性。
The characteristic of this model is: a new interface edge singular element model is derived based on the numerical fundamental solutions obtained from the finite element eigensolutions method.
该模型的独特之处在于：基于有限元特征法得到的奇异性场数值特征解建立了一种新型界面端奇异单元。
An efficient numerical method for the finite-element model updating of damped gyroscopic system was developed based on incomplete complex modal measured data.
提出了一种基于不完备复模态测量数据修正阻尼陀螺系统有限元模型的有效数值方法。
The numerical model of 1-d water infiltration and solute transport through layered soils is constructed by the characteristic finite element method.
应用特征有限元法对一维非饱和分层土壤水分入渗方程及溶质运移方程进行离散化，得到了其特征有限元数值模型。
The numerical model of 1-d water infiltration and solute transport through layered soils is constructed by the characteristic finite element method.
应用特征有限元法对一维非饱和分层土壤水分入渗方程及溶质运移方程进行离散化，得到了其特征有限元数值模型。
应用推荐