I use a small overlap and fusion-welding techniques to get the lightest but strongest results.
我用一个小的重叠和融合，焊接技术得到最轻的，但强烈的结果。
EN ISO 287-1 Qualification Test of Welders-Fusion Welding-Part 1: steels.
ENISO 287-1焊工资质测试—熔焊—第一部分：钢材。
Because of the high activeness of the titanium alloys, the inert gases or vacuum shielding is needed in fusion welding.
由于钛合金的活性强，熔化焊时需要用惰性气体或真空进行保护。
A new view of characteristic zone of fusion welding joint is put forward through observations and researches of many fusion welding joints.
通过大量的熔化焊接头试样的观察和研究，提出了熔化焊接头特征区域划分新方案。
The heat of fusion welding is generated in several ways, depending on the sort of metal which is being welded and on its shape.
熔焊的热度有几种来源，取决于被焊金属的种类及其形状。（注重的是翻译出语言的简练）
The joint which is connected by welding method is called the welding joint, which is composed of welding seam, fusion zone, heat affected zone and its adjacent base metal.
用焊接方法连接的接头称为焊接接头，它由焊缝、熔合区、热影响区及其邻近的母材组成。
C,. Incomplete fusion prevent adopting greater welding current, use correctly to weld the cleaning of operating, notice groove position.
未熔合的防止采用较大的焊接电流，正确地进行施焊操作，注意坡口部位的清洁。
According to the different product structure, butt fusion welding process and lap seam welding process are used to respectively weld left and right half shell of upper body.
上体左、右半壳直焊缝视产品结构不同，分别采用对接熔化焊和搭接缝焊工艺。
Modern analytical methods have been used to investigate the patterns of fusion zone and the diffusion behaviors of elements by tig direct welding and tig with Sn as transition layer welding.
利用现代分析测试手段分别研究了TIG焊直接焊接镁铝和镀锡焊接镁铝的焊缝熔合区形貌，并对其进行了元素扩散行为的分析及比较。
The main region of invalidation of the weld joint between different steels is commonly in fusion zone during welding or serving.
异种钢焊接接头在焊接时或使用期间，发生失效的主要区域通常在熔合区。
The research status of welding of magnesium alloys by fusion welding and solid - phase joining at home and abroad is summarized.
综述了近年来国内外镁合金在熔焊连接和固相连接两方面的研究现状与进展。
Weldability of high alloy tool steels is analyzed, the application of fusion welding, brazing and solid-state welding in the welding of high alloy tool steels had been summarized.
高合金工具钢的焊接性能较差，但高合金工具钢的焊接在工业上有较广泛的应用。
The experiment shows that fusion welding reinforcement could proceed on the surface with crack of the die after crack arresting.
脉冲放电止裂后，可对带有裂纹的表面进行强化处理。
The method and the operation of the fully and automatically improved fusion electrode welders were presented, the method could ensure the welding quality of H steel, and increase the welding velocity.
介绍了对熔化极焊机全自动改进的方法、操作。此法有效地保证了H钢的焊接质量，提高了焊接速度。
The hardness tests on welding joints prove this by showing that the hardness reduces in fusion area, and increases slightly in weld zone.
通过对焊接接头的硬度检测，发现熔合区硬度下降，焊缝区略有上升。
English Name: welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections.
简体中文标题：焊接。钢、镍、钛和其合金的熔焊接头(束焊除外)。缺陷的质量等级。
The weld defects of incomplete fusion and burn through always occur when the electro-slag welding is used between the outside thin metal plate and the inner clapboard in a box-section member.
箱形截面构件薄壁板与内隔板电渣焊接时，易产生壁板烧穿和焊缝未熔合现象。
The laser-arc hybrid welding can improve the depth of fusion, welding speed and assembly gap, so it is a new and promising thermal source for welding.
激光-电弧复合热源焊接可以增大焊接熔深，提高焊接速度，增大装配间隙，是一种很有前途的新型焊接热源。
Parameters of butt fusion welding of plastic pressure-pipe are different for varying pipe diameters and ambient conditions, and it is also affected by personal factor.
塑料压力管道热熔对接焊的工艺参数随管道尺寸和环境条件的不同而不同，同时还受人为因素的影响。
In basis of analyzing the features of the conventional arc welding technology, a DC low-frequency plasma welding power with fusion penetration is selected as the heat source for metal forming.
本课题在分析常规弧焊技术特点的基础上，选取熔透式低频直流等离子弧焊电源作为成形的热源。
The fusion welding, arc erosion mechanics and corrosion mechanics of Ag-W contact are also discussed.
对银钨触头的熔焊特性、电弧侵蚀机理以及腐蚀机理进行了探讨。
English Name: welding consumables - wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels - Classification.
简体中文标题：焊接消耗品。不锈钢和耐热钢氧炔焊用焊丝电极、焊丝和焊条。分类。
Impact strength of fusion butt welding joint of polyethylene pipes was tested with a digital impact tester, and some actual fusion welding cases were commented.
应用仪器化冲击试验机对聚乙烯热熔对接焊的冲击性能进行了测试，并对几种实际焊接情况进行了分析。
As an emphasis, the fusion zone is always studied by the welding engineers for a long time.
长期以来，异种钢接头熔合区一直是焊接工作者研究的重点。
During spot welding, length (l), position, range of under-fusion area of resinous layer and change of tissues, component near resinous layer are researched.
研究了在点焊过程中，中间树脂层未焊合区长度尺寸(L)、未焊合区所在部位、硬化区域大小、树脂层附近组织和成分的变化。
A crack is found after SR heat treatment in the vertical welding fusion line for water distribution ring pipe of a electric machinery.
某设备制造厂电机配水环管立缝在消除应力热处理后，熔合线附近出现裂纹。
In this paper, a novel functionally gradient material manufacturing method which is based on directly metal forming technology of fusion welding buildup is studied.
本文研究了基于堆焊的直接金属成型技术用于梯度材料零件制造的新方法。
Professional supply schneider LC1D ac contactor. Low consumption, long life, safe and reliable, energy saving, high quality silver contact, high fusion welding and electrical wear resistant ability.
专业供应施耐德lc1d交流接触器。功耗小、寿命长、安全可靠、节能、优质银触点、高抗熔焊及耐电磨损能力。
Professional supply schneider LC1D ac contactor. Low consumption, long life, safe and reliable, energy saving, high quality silver contact, high fusion welding and electrical wear resistant ability.
专业供应施耐德lc1d交流接触器。功耗小、寿命长、安全可靠、节能、优质银触点、高抗熔焊及耐电磨损能力。
应用推荐