As experienced by most people, adoption is a slow, grinding process.
如大多数人经历的一样，收养是一个缓慢而艰难的过程。
But Spain no longer has its own money, which means that it can regain competitiveness only through a slow, grinding process of deflation.
然而，西班牙不再拥有自己的货币，这就意味着它只能通过缓慢而折磨人的通货紧缩来重新恢复竞争力。
The results indicate that increasing the vertical pressure or grinding speed is beneficial to the grinding process of ceramic corundum abrasive belt.
试验结果表明，采用较大的法向压力或适当增大磨削速度等磨削参数，可以高效发挥陶瓷刚玉砂带的磨削性能。
There are many ways to arrange the grinding process for one roll.
对于同一轧辊，修磨工序的安排可以有多种。
There are many ways to arrange the grinding process for one roll.
对于同一被修磨的轧辊，修磨工序的安排可以有多种。
A new method to control elastic yielding wheel in grinding process is presented.
本文提出了一种控制磨削过程中弹性退让的新方法。
The addition of sodium carbonate into the grinding process can realize the selective desliming.
磨矿过程中添加碳酸钠，可实现矿泥的选择性脱除。
A fully new type of grinding process for the crowed raceway of cylindrical bearing is proposed.
提出一种全新的滚子轴承滚道凸度磨削成形技术。
These dimensions vary widely, depending upon the grinding process for which the wheel is to be used.
根据采用砂轮的磨削工艺，这些尺寸变化很大。
With low utilization efficiency, the energy consumption is extremely high during coal grinding process.
煤炭的研磨过程能耗高、能量利用率低。
This conclusion provides theoretical basis for grinding process to decrease blockage of grinding wheels.
该结论为磨削加工过程中减少砂轮堵塞提供了依据。
The method of quality inspection and control in cement grinding process of the cement plant was presented too.
介绍了该工厂水泥粉磨过程的质量检验、质量控制方法。
Measure the grinding force in grinding process and compute the grinding energy ratio, analyzing the grinding mechanism.
试验还进行了磨削过程中磨削力的测试和比磨削能的计算，分析了陶瓷材料的去除机理。
Objective To identify and analyze occupational hazard for cement grinding process, and confirm critical control points.
目的通过对水泥粉磨工序职业病危害因素的识别与分析，确定职业病危害的关键控制点。
A feasibility analysis is made on the method by testing the temperature in grinding process and monitoring grinding burn.
并通过实际磨削测温实验及烧伤跟踪实验对该方法的可行性进行了分析。
Therefore, the cast iron segment can be used as novel fine grinding medium for grinding process substituting for steel ball.
铸铁段可以取代钢球成为细磨作业的新型介质。
On line monitoring for grinding arc temperature is a necessary and important section to realize automation of grinding process.
对磨削弧区温度进行在线监测，是磨削加工自动化中必不可少的重要环节。
Combined with the study of constant force grinding, a self-study method on fuzzy control rules in grinding process is suggested.
结合恒力磨削的研究，提出了一种基于磨削数据的模糊控制规则学习方法。
Block, backplane: high-quality oak molding by the mold pressing, grinding process by profiling, do the multi-layer paint finishes.
座、背板：采用优质橡木经模具热压成型，经仿形打磨工序、做多层油漆饰面。
Comminuting effect in grinding process by using cast iron segment as fine grinding media is studied with comparison to steel ball.
采用普通钢球作为对比，研究磨矿过程中以铸铁段为细磨介质的破碎效果。
In this paper, it is stated that grinding process is a dynamic one. Then the parameters of grinding dynamics equation will change.
通过试验研究指出，磨碎过程是一个动态过程，故动力学方程序的参数也将是变化的。
The influences of carburizing heat treatment process and grinding process on surface residual stress of automobile gears are studied.
研究了渗碳热处理过程中淬火冷却和回火状况以及磨削加工对渗碳淬火汽车齿轮表面残余应力的影响。
D real scene of CAM shaft grinding process system is a basic function unit of the CAM shaft virtual reality grinding system in our research.
凸轮轴磨削工艺系统三维实景是本研究中凸轮轴虚拟磨削加工系统的基础功能单元。
The mathematical model is established for the dynamic distributions of dimension errors in bearing grinding process by means of the Grey theory.
基于机械加工误差的特点，利用灰色系统理论建立轴承磨削加工过程尺寸误差动态分析的数学模型。
The change in particle size distribution of fly ash in grinding process and its influence on the activity of fly ash are presented in this paper.
研究了粉煤灰在机械磨细过程中粒度分布的变化规律，分析了磨细灰的粒度分布特征对其活性的影响。
Pointing at problems produced in grinding process of bearing rings with double raceways, the dynamic control grinding process method is put forward.
针对双滚道滚动轴承套圈磨削加工过程中存在的问题，提出了动态控制磨削加工法。
Pointing at problems produced in grinding process of bearing rings with double raceways, the dynamic control grinding process method is put forward.
针对双滚道滚动轴承套圈磨削加工过程中存在的问题，提出了动态控制磨削加工法。
应用推荐