First, the author designed the guide vane.
首先，进行导叶的设计。
In this paper, the rotary guide vane nozzle has been studied.
本文针对导叶式旋转射流喷嘴进行研究。
The results showed that it is successful of the redesign to the guide vane.
结果表明，对此涡轮导向叶栅的改型设计比较成功。
This paper introduces structure and regulation theory of flexible guide vane.
本文介绍了柔性导叶的结构及调节原理。
Li Caihui Solving method for development of back guide vane of the fan is introduced.
介绍了通风机后导叶展开的计算方法。
A reform scheme with exit guide vane remained for large axial flow pumps is discussed deeply.
对大泵改造保留出口导叶的叶轮改型方案作了深入的探讨。
It can be used adding force combustion chamber, guide vane, turbo vane, turbo table and nozzle etc.
主要用作加力燃烧室、导向叶片、涡轮叶片、涡轮盘、喷嘴等。
The structure of disorder discrete slots will be applied to the guide vane of the engine practically.
该叉排离散缝槽结构应用于发动机进气道的导流叶片上。
Optimum guide vane and bucket positioning with flow field characterris-ics both for clean and sandy water are…
得到了在清水和含沙水条件下两种活动导叶与固定导叶的最佳相对安放位置和流场的不同特性。
In this paper, the construction, principle and reasonableness of J seal of turbine guide vane trunnion are presented.
本文阐述了水轮机导叶轴颈J型密封的结构、工作原理及其合理性。
The utility model relates to the field of a fan, particularly a regulating device for a differential guide vane of the fan.
本实用新型涉及到通风机领域，是一种通风机差动导叶调节装置。
The guide vane safety device include three kinds of structures, the destructive structure concerning shear pin and snap pin;
导叶安全保护装置主要包括：破坏性结构，剪断销、拉断销；
The experimental results indicate that the flexible guide vane regulation is a comparative ideal regulating method for mine local fan.
实验结果表明，柔性导叶调节是矿井局扇凤机中一种比较理想的调节方法。
It is composed of propeller and guide vane, the latter is installed at an appropriate position between stern appendages and propeller.
它由螺旋桨和安装在尾附体与螺旋桨之间一适当位置上的导叶组成。
Hydrolic design of runner and guide vane, the results for comparative test of runner and characteristics for this turbine are introduced.
论及了导叶及转轮的水力设计及其比较试验，阐述了这种机型的优秀特点。
Therefore when using low aspect ratio blade during the design of high pressure guide vane, attention should be made in order to obstruct the …
因此在高压导叶设计中 ，当采用低展弦比叶片时 ，应注意削弱叶片出口附近流场的严重径向窜流。
Guide vanes have inhibiting device, and the guide vane which has been cut off will not spin in order to avoid collisions with other guide vanes.
导叶设有限位装置，剪断销剪断的导叶不能随意转动，避免与其他导叶碰撞。
Submarine Guide Vane Propeller is a new device developed by CSSRC to improve powering performance and reduce propeller-radiated noise of submarine.
潜艇前置导叶螺旋桨是CSSRC为提高潜艇快速性和降低螺旋桨噪声而开发的一种新装置。
The connecting rods between the guide vane servomotor piston rods and guide vane operating ring shall be of steel, with grease lubricated bearings.
导叶操作圆环将被设计接受导叶辅助电动机连接杆和别针在圆环的相反点。
On the basic of former engine, the angle variable partial program of the fan and compressor guide vane of engine mathematical model is been renewed.
在原发动机模型的基础上，补充编制了发动机数学模型的风扇和压气机导叶角度可调的部分程序；
In comparison with other centrifugal gas-liquid separators, the resistance loss of the axial flow guide vane type gas-liquid cyclone separators was less.
轴流导叶式气液旋流分离器与其他离心式气液分离器比较，其特点是阻力损失小。
A feature of this guide vane was existence of a long inlet duct with big meridional divergent angle in order to fulfill the requirements of the structure.
该涡轮导向器的一个显著特点是由于结构上的要求，静叶前子午流道在上端壁具有较大的扩张角。
The origin of the unit vibration in small guide vane opening is analyzed when the unit is closing and the optimal scheme of the unit closing law is suggested.
本文拟对关机过程中导叶小开度振动原因进行分析，并对机组关闭规律的优化方案及实施过程进行介绍。
Based on the consideration of nozzle ring pneumatic torque transmission, the torque of pneumatic force acting upon nozzle guide vane was acquired by calculation.
在考虑了喷嘴环气动转矩的传递过程后，通过换算，求出了气动力作用在喷嘴导流叶片转轴上的转矩。
The results show that it is possible to use effusion cooling on turbine guide vane, but there still remain a lot of work to do for it is really used on an engine.
研究表明该冷却方式在导向叶片上的应用是可行的，但该冷却方法的工程化仍有大量的工作要做。
Guide vane operation structure includes the guide vane arm clip board, guide vane arm, segmental keys, connection board, handle, cut pin, connecting rod pin and gland, etc.
导叶操作机构主要包括：导叶臂压板、导叶臂、分瓣键、连接板、耳柄、剪断销、连杆销及压盖等。
For validating the aerodynamic characteristics of LP turbine guide vane, the wind blow was carried out for test cascade of the guide vane on the low speed annular wind tunnel.
为了考查低压涡轮导向器的气动性能，在低速环形叶栅风洞上对导向器的实验叶栅进行了吹风实验。
For validating the aerodynamic characteristics of LP turbine guide vane, the wind blow was carried out for test cascade of the guide vane on the low speed annular wind tunnel.
为了考查低压涡轮导向器的气动性能，在低速环形叶栅风洞上对导向器的实验叶栅进行了吹风实验。
应用推荐