This hardware peripheral responds to gamers' motions, allowing users to interact with the system without a controller.
此周边硬件可以对玩家的动作作出反应,让玩家不用通过手柄就可以与系统进行互动。
The hardware structure of this system adopts modularized standardization robot controller with opening style. It adopts distributing computer measure and control system structure.
测控系统的硬件采用开放式结构的模块化、标准化机器人控制器,分布式计算机测控系统结构;
Through the analysis of the controller, and the test of the system hardware of the controller, the concrete parameters were determined, the satisfactory control effect was obtained.
通过对控制器设计的分析,结合系统硬件进一步对控制器进行测试,确定了具体参数,获得了满意的控制效果。
This paper analyses the construction of hardware of the microprocessor scan controller and introduces the system software and main functions of the instrument.
本文分析了微处理机扫描控制器的硬件结构,并对系统软件和仪器的主要功能作了介绍。
This paper expounds the principle of the RTU controller and the structure of system, which designs the hardware and software for the controlled system.
文章中对RTU控制器原理和系统结构进行详细论述,对控制系统的硬件和软件分别进行了设计实现。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
介绍了CAN总线控制器在铣刨机系统中的应用,同时介绍了其行走控制系统的硬件、软件设计。
The software and hardware of a digital AC servo system using a digital controller DMC300A as the control center is designed. This method to obtain some important parameters is proposed.
论述了以数字控制器DMC300A为核心的数字式交流伺服系统的硬件和软件设计,对设计过程中所涉及到的重要参数给出了设定方法。
This paper introduces briefly the application of programmable controller in travel control system of Mine hoist, and gives out the system hardware and software design.
简要介绍了可编程序控制器在矿井提升机行程控制系统中的应用,并给出系统硬件配置和软件设计。
Hardware circuit part of control system mainly includes controller, sensor, and motor driver chip.
控制系统的硬件电路部分主要包括控制器、传感器和电机驱动芯片。
The hardware of the system comprises the five sub-systems, i. e. welding power source, arc length controller, welding wire feeder, welding head traveller and detector.
此系统的硬件主要包括五个子系统,即:焊接电源、弧长控制器、送丝机构、焊矩行走机构和检测机构;
This paper introduces the design of an intelligent controller of solar energy heater based on DS1302. The hardware and the software of the system are also given.
本文介绍了一种基于DS1302的太阳能热水器智能控制器的设计方法,给出了系统硬件设计及软件实现方法。
According to system demands, it is chosen and designed for hardware and software of the control system, and SIMATIC S7-300 programmable controller of SIEMENS Corporation is chosen.
根据系统要求,分别对控制系统的硬件和软件两个方面进行选择和设计,选用西门子公司的SIMATIC S7- 300可编程控制器。
How to make precise position through fuzzy controlled asynchronous motor is explained in detail. Specified design process of fuzzy controller and hardware connect of position system.
论述了采用模糊控制实现三相交流异步电动机主轴定位的设计思路、模糊控制器的设计过程及定位系统的硬件连接。
This paper introduces a design method of intelligent controller of solar energy heater which is composed of 89c51 single-chip microcomputer, it has hardware system design and software design.
介绍了一种以89c51单片机为核心构成的太阳能热水器智能控制器的设计方法,给出了系统硬件设计及软件实现方法。
Hardware and software configuration of drive system with position controller, DC drive unit and PLC for a retainer of semi-floating mandrel mill are analysed.
分析了由位置控制器、直流传动装置和PLC组成的半浮芯棒连轧机组限动链控制系统的硬件配置及软件组成。
The characteristics and structure of braking energy regenerative system of city bus are introduced, and the hardware circuit of the controller and related software are designed.
介绍了公共汽车制动能量再生系统的特点及组成,对控制器的硬件电路及软件进行了设计。
This paper introduces the basic feature of CAN controller, and presents the hardware and software design about P80C592 chip with CAN controller in the control system of rotor scale.
本文介绍了CAN控制器的基本特点,并给出了带有CAN控制器的P 80c 592芯片在转子秤控制系统中的硬件和软件设计。
This paper describes the operation principle of CAT system of pressure controller and the structure of the hardware and software by a new (digital) pressure controller test.
本文结合新型压力控制元件—数字式压力控制器的测试试验,阐述了压力控制器微机辅助测试系统的原理及软硬件结构。
In the paper, engine electronic controller(EEC) which is fit for distributed system is designed from the way of hardware and software, such as regular pulse generator.
从软、硬件角度设计了适用于分布式系统的发动机电子控制器,如周期信号发生器;
For the requirements of the system, a controller, whose kernel is ARM, is designed. The controller design includes hardware design and software design.
针对温度模拟系统对控制器的要求,提出了以ARM为核心的温度控制器的设计方案,并进行了硬件设计及软件设计。
The manipulators control system is set With DSP as the core controller and the hardware and software design method are presented.
以dsp作为核心控制器,搭建了机械臂控制系统,同时给出了硬件和软件设计方法。
The structure of the hardware and software of an aviation gyroscopic test system combined by industrial control computer, interface controller and test adapter is introduced.
介绍了工业控制计算机、接口控制箱、测试适配器组成的航空陀螺综合测试系统的硬件和软件结构。
It puts forward a control plan and the control output implementation scheme. The structure of controller hardware and the design of software system are also introduced.
文中提出了智能控制方案及控制输出实施方案,介绍了控制器硬件结构与软件系统的设计。
In this paper, the intelligent controller of spring-washer packing system is introduced. The hardware architecture and the method of solving two key-technologies are given.
本文介绍了弹簧垫圈智能包装控制系统,给出了系统的硬件结构,提出了对两个关键技术问题的解决方法。
The controller system design includes hardware circuit design, software design and touch screen design.
主要包括系统的硬件设计、软件设计及触摸屏显示模块的设计。
The controller system design includes hardware circuit design, software design and touch screen design.
主要包括系统的硬件设计、软件设计及触摸屏显示模块的设计。
应用推荐