Through friction, this flexing produces heat in the moon's interior capable of melting ice.
通过摩擦，这种弯曲在月球内部产生了能够融化冰的热量。
The cave-making recipe calls for a steady emission of volcanic gas and heat, a heavy annual snowfall at an elevation high enough to keep it from melting during the summer.
洞穴的形成需要火山气体和热量的稳定释放，海拔高到足以防止每年的大量降雪在夏季融化。
The warmer ocean would heat the air above it, which would slow the refreezing of ice in winter, which would in turn become even more susceptible to melting in summer.
温暖的海洋将加热海洋上空的空气，这将减缓冬季冰重新冻结，这反过来使海冰更加容易在夏天融化。
Beyond warming the atmosphere, black carbon can also speed the melting of glaciers by literally turning them black - soot on snow makes the ice heat up faster.
除了给大气加热，炭黑还能覆盖冰川表面，便其表面颜色变黑，从而加速冰川融化。
No matter how you slice it, a greasy slick will ooze out of melting cheese, when heat renders liquid fats that were solid at room temperature.
不管你怎么切，融化的奶酪都会渗出油腻粘滑的油脂，因为室温下呈固态的脂肪一旦受热就会变成液态。
By covering the valleys that form darker areas, therefore attracting the sun's heat, he hopes to significantly slow the melting of the glacier.
他希望，通过盖住形成阴影地区的山谷来吸收太阳热能，从而显著减缓冰川融化。
And today under the heat of a harsh sun, it's melting fast.
今天，在烈日的照耀下，冰雪正在快速融化。
In the process of melting the rock the lithium loses some of its heat.
在熔化岩石的过程中，锂失去它的一些热量。
Reflow Soldering: Melting, joining and solidification of two coated metal layers by application of heat to the surface and predeposited solder paste.
回流焊：应用加热金属涂敷层的表面和预涂焊膏，熔融，连接和凝固两个金属涂层。
This paper introduces the rehabilitation procedure of PE lined pipeline and stresses on quality control requirement of PE pipe heat melting welding.
文章介绍了内衬PE管修复技术的施工程序，强调了PE管道热熔焊接质量控制要求。
The coefficient of linear expansion of the body and glaze, the melting temperature range, the whiteness, the microhardness and the heat stability of glaze were tested.
测试了基体和熔块的线膨胀系数、釉的熔融温度范围、釉面的白度、显微硬度和热稳定性等性能。
The melting temperature, melting heat, static and dynamic mechanical properties of PA6/PTFE blends and PA66/PTFE blends are experimentally investigated in this paper.
研究了PA6/PTFE和PA66/PTFE共混物的熔融过程的热学性能、动态力学性能和吸水前后的静态力学性能。
The results show that the formation of surfacing layers is related to the heat capacity and melting point of surfacing materials.
结果表明，堆焊层的成形与堆焊材料的比热容量和熔点有关。
The concept of heat threshold is brought forward for the melting process of radioactive source with constant heat rate.
针对恒释热率热源接触熔化，提出了热量阈值的概念。
By applying theory of heat transfer, a melting model of material filament in liquefied pipeline is built and solved by numerical method.
应用传热学理论，建立材料丝在液化管中的熔融模型。采用数值解方法，求出该模型的解。
By optimizing composition, foundry method, melting process and heat treatment process, the rate of qualified castings was increased up to 85%.
通过对成分、铸造工艺、熔炼工艺及热处理工艺的优化，使铸件的工艺出品率达到85%。
The mantle plume provided benefiting heat source and structure conditions for the deep melting of metallogenic magma, differentiation and shallow emplacement.
湘东南地幔柱为成矿岩浆的熔融、分异演化和浅部就位提供了有利的热源和构造条件。
The result shows that the strength, especially elongation, of adjusted pressure casting sample is increased dramatically under the same conditions of melting and heat treatment.
结果表明，在相同的熔铸工艺和热处理条件下，调压铸造试样的强度，特别是延伸率得到大幅度提高。
The thermal properties of cool storage material include freezing and melting point, freezing and melting latent heat during the phase change process were investigated.
通过实验研究了空调蓄冷材料的凝固温度、融解温度、凝固潜热和融解潜热等热学性能。
The effects of natural convection and moving of solid PCM on melting heat transfer are compared.
固态相变材料的运动对熔化传热过程有着重要影响。
Chemical composition, melting processes, casting and heat treatment of high chromium cast iron were determined according to the requirement of materials for dredge pump cover.
在分析杂质泵护套材质要求的基础上，确定了高铬铸铁的化学成分和熔炼、铸造及热处理工艺。
Latent heat storage system based on phase change materials' (PCMs) melting and freezing is particularly suitable for solar energy heating, peak-shift of electrical demand and heat recovery.
基于相变材料熔化和凝固过程的相变潜热储能系统适用于太阳能加热、电力的‘削峰填谷’、热能回收。
The complexity of solid sulfur's melting process and so many factors affecting the heat transfer area make the calculation of sulfur's melting process quite complicated.
固体硫磺的熔融过程较为复杂，影响传热面积的因数很多，熔硫槽传热面积的计算颇为繁琐。
Application and energy saving effects of regenerative heat exchanging technology in aluminium melting furnace are introduced in this paper.
简要介绍了蓄热式换热技术在熔铝炉上的应用情况及节能效果。
The number of melting peaks was increased from 1 to 2 with the increase of draw ratio after heat treatment under relaxation and from 1 to 3 after heat treatment under partial tension or full tension.
随着拉伸倍数提高，纤维经松弛状态下热处理后，其熔融峰数目由1个变为2个；而经部分张力和张力状态下热处理后，其熔融峰数目均由1个变为3个。
The number of melting peaks was increased from 1 to 2 with the increase of draw ratio after heat treatment under relaxation and from 1 to 3 after heat treatment under partial tension or full tension.
随着拉伸倍数提高，纤维经松弛状态下热处理后，其熔融峰数目由1个变为2个；而经部分张力和张力状态下热处理后，其熔融峰数目均由1个变为3个。
应用推荐