Heat pipe exchanger is an efficiently change hot device.
热管换热器是一种高效的换热装置。
The paper introduces the separate type heat pipe exchanger to heat the gas from process liquid.
文中介绍一种利用工艺中液体冷却放出热量来加热气体的分离式热管换热器。
In this paper, a fluorescent tube heat pipe exchanger is designed to complete the performance test.
本文对一台光管热管式换热器进行了台架性能试验。
The general test of thermal units were designed and assembled. The heat transfer performance of heat pipe exchanger was studied on the general test of thermal units.
设计并组装了热工综合试验台，在热工综合试验台上对热管换热器的换热性能进行了研究。
The simulation results indicated that heat pipe diameter, pipe length, tube pitch and fin structure had influence on the efficiency and pressure drop of heat pipe exchanger.
模拟结果表明，热管的管径，管长，管间距和翅片结构均影响热管换热器的换热效率和压力降。
The new type of all-welded plate & shell heat exchanger combining the advantages of plate, shell & pipe heat exchanger has been applied in industry and shipbuilding.
近年来，集板式、壳管式换热器优点于一体的新一代板壳式换热器在工业、船舶行业有了一定程度的应用。
On the other hand, cryogenic compressed air in the heat exchanger temperature rise, so that the exhaust pipe is not caused by low temperature and dewing phenomenon.
另一方面，低温压缩空气在热交换器里温度得到回升，使排气管道外壁不致因温度过低而出现结露现象。
The preheating method includes heat-pipe exchanger, tubular heat exchanger, plate heat exchanger, heat medium exchanger and regenerative hot stove.
预热法包括用热管换热器、管式换热器、板式换热器、热媒式换热器和蓄热式热风炉。
The cause of externally applied pipe load to brazed aluminum heat exchanger and the necessity of calculating allowable pipe load are analyzing.
分析了板翅式换热器封头接管外载荷产生的原因和进行许用接管载荷计算的必要性。
Problems such as compatibility, ash deposit and corrosion which appear in industrial application of heat-pipe exchanger are analyzed, meanwhile, measures are brought forward.
对热管换热器工业应用过程中热管存在的相容性、积灰结垢和低温腐蚀等几个主要问题进行了分析，提出了相应的解决办法。
The types of geothermal heat exchanger was described. The design method of the vertical coiled pipe geothermal heat exchanger and the selecting method of the circulators was presented.
介绍了地热换热器的形式，提出了竖直埋管地热换热器的设计方法及地下环路循环泵的选择方法。
In this paper, the improving method and programming arithmetic of pipe layout drawing for tabular heat exchanger were introduced, which has been used in the relevant module in PVCAD.
介绍了PV CAD软件包管壳式换热器模块布管图的计算机改进方法以及程序算法。
The heat economic analysis for pipe exchanger with fins is made, and its advantages are discussed.
采用热经济分析法，以翅片管式热交换器为研究对象，讨论热经济分析法的优越性。
The heat pipe heat exchanger is a new kind of heat exchanger, which is an excellent device to recover industrial waste heat.
热管换热器是一种新型换热器，它是回收工业余热的理想设备。
The research and industrial application of high temperature heat pipe heat exchanger represented by liquid metal heat pipe technology was introduced.
介绍了以液态金属热管技术为代表的高温热管换热器的研究与工业应用。
The new heat pipe type heating furnace with high efficiency based on heat pipe principle is consisted of the combustion chamber, evaporator and heat exchanger.
基于热管原理将燃烧室、蒸发器和换热器集于一体，构成了新型高效热管式加热炉。
In this paper, simulation calculation and optimum design for the moderate-temperature heat pipe heat exchanger were chiefly discussed.
本论文主要完成中温热管空气换热器模拟计算和优化设计的研究。
Brass seamless tube can be used in heat exchanger and condenser, low temperature pipe, underwater transportation pipe.
黄铜无缝管可用于热交换器和冷凝器、低温管路、海底运输管。
Hot-pipe heat exchanger has high heat efficiency and a broad prospect for its application.
热管换热器换热效率高，具有广阔的推广应用前景。
Heat pipe heat exchanger has many types, it is important how to choose them in engineering application.
热管换热器形式多样、结构复杂，因而如何选择其形式是工程应用中的一个重要环节。
The heat pipe and heat exchanger have the advantages of high heat transmission efficiency, simple structure, safety and reliability, small fluid resistance, needing no repairing and additional power.
热管及热管换热器具有传热效率高、结构简单、安全可靠、安装方便、流体阻力小、不需维修和外加动力等优点，已经获得了广泛的工业应用。
An unsteady heat transfer model was sot up and solved by numerical solution for the heat transfer characteristic of U-pipe heat exchanger and the interaction of the two pipe legs of the GSHPs.
针对U型管埋地换热器的传热特点，考虑了两管脚之间的相互影响，建立起非稳态传热模型。
The design method of the vertical coiled pipe geothermal heat exchanger and the selecting method of the circulators was presented.
介绍了地热换热器的形式，提出了竖直埋管地热换热器的设计方法及地下环路循环泵的选择方法。
Using heat pipes as the heat transfer component in latent heat thermal energy storage system, a set of heat pipe heat exchanger with latent heat storage was designed and manufactured.
将热管作为换热元件应用于相变蓄热系统中，研制了一套热管式相变蓄热换热器。
The question about heat-pipe exchanger′s resistance is an important aspect of heat-pipe exchanger′s research and is related to its development, design, application and anti-corrosion measure etc.
热管换热器的阻力降问题涉及到其研发、设计、应用以及防腐措施等方面，是热管式换热器研究的一个重要方面。
Based on the on - site testing of the pipe - shell heat exchanger, ways to test and check - up the heat transfer property of the pipe - shell heat exchanger are suggested int...
通过对管壳式换热器现场测试工作进行总结，提出了管壳式换热器的传热性能的热工检测方法与校核计算方法。
This article introduces the characteristics of the heat pipe and heat-pipe heat-exchanger, and the author designed a heat-pipe intercooler for experiment.
介绍热管及热管换热器的特点，设计了试验用热管中冷器。
Analyses and discussions were conducted of a non steady heat transfer model for the vertical embedded pipe of a geothermal heat exchanger.
对地热换热器竖直埋管的非稳态传热模型进行了分析讨论。
Analyses and discussions were conducted of a non steady heat transfer model for the vertical embedded pipe of a geothermal heat exchanger.
对地热换热器竖直埋管的非稳态传热模型进行了分析讨论。
应用推荐