The shape of carbide formed with in grain depended on holding temperature.
晶内析出的碳化物形态与转变温度有关。
Holding temperature and time shall follow the requirements specified in Table 1.
保温温度和时间应遵照表1指定的要求。
Within 10 days, either the holding temperature or the turning egg (or not turning) had slight effect on the hatchability.
种蛋存放10天内，湿度偏高或偏低，以及是否翻蛋都对孵化率影响不大。
With the Copenhagen talks intent on holding temperature rises to 2c, Huq warned that further extreme weather events and disasters were inevitable.
对于哥本哈根谈判致力于控制气温升高2摄氏度，胡克警告说，更极端的气候事件和灾难不可避免。
Effect of mould holding temperature on the microstructure and mechanical properties of single crystal superalloy DD98 have been investigated.
研究了不同的型壳保温温度对一种铸造单晶高温合金dd 98铸态组织、热处理组织和持久性能的影响。
Objective To investigated the effects of different holding temperature on the metabolic activity, ultrastructure and patency of cryopreserved allograft arteries.
目的探讨不同维持温度对冷冻保存异体动脉内皮细胞代谢活性、超微结构和移植通畅率的影响。
In this study, the effects of plasticdeformation of the austenite phase and the holding temperature on thetransformation kinetics and the ferrite grain size are investigated.
研究了奥氏体相塑性变形和保温温度对相变动力学以及铁素体晶粒尺寸的影响。
In this paper, the heating temperature, THD heating rate, the holding temperature time and the cooling rate and so on were studied, and the direction to formulate technology parameters...
文中从加热温度，升温速度，保温时间，冷却速度等方面进行了分析研究，指出了退火工艺参数合理制订的方向。
When the preformed Magnesium alloy's texture was globalizing, there were two important control factors, which were holding temperature and holding time, affecting the globalization processing.
等温温度和保温时间是形变镁合金组织球状化的两个重要控制因素。
The results show that, with the increase of holding temperature, the amount of bainite and retained austenite, the carbon concentration in retained austenite first increases and then decreases.
结果表明，随等温温度的升高，贝氏体、残余奥氏体的量以及残余奥氏体中碳浓度先增加后减少。
Then we can take the derivative of that quantity, when we vary the temperature, holding the volume constant.
即恒定体积，改变温度，这里恒定温度下。
The rate of antioxidant degradation is affected by extrusion temperature, holding time, heating methods and the activation energy of the antioxidants.
挤压稳定化温度、保温时间、加热方法和抗氧化组分的活性能影响抗氧化组分的分解速率。
The influence of synthesis temperature and holding time on synthesis was investigated.
研究了合成温度和恒温时间对反应过程的影响。
Effect of sintering temperature and sintering holding time on green density was analyzed.
分析了烧结温度和烧结保温时间对压坯密度的影响。
The results show that heating temperature and holding time are two important factors affecting the grain size and uniformity.
实验表明，加热温度和保温时间是影响晶粒尺寸和均匀性两个重要的因素。
The result indicates that under different quenching temperature and holding time, the formed bainite morphology are different.
结果表明，在不同淬火温度和保温时间下形成不同的贝氏体形貌。
The influence of brazing temperature and holding time on microstructure and tensile strength was studied.
研究了钎焊温度和保温时间对钎焊接头组织和性能的影响。
The effects of the aging temperature and holding time on the microstructure and hardness of the ultra-low-carbon steel bearing copper were investigated.
研究了时效温度和保温时间对时效硬化型超低碳含铜钢的显微组织和硬度的影响。
The microstructure of AZ61 magnesium alloy by strain-induced melt activation (SIMA) process was studied to reveal the effects of prior compressive deformation, isothermal temperature and holding time.
研究了AZ61镁合金在应力诱发熔体激活法(SIMA)制备半固态坯料过程中预变形量、等温温度和保温时间对其组织的影响。
The effects of solid-solution temperature and holding time on the grain growth and hardness of GH4169 superalloy were investigated.
研究了热处理温度和保温时间对GH4169合金晶粒长大规律和硬度的影响。
The effects of particle size, synthesis temperature, holding time and flowing gas atmosphere were studied.
研究了粉末颗粒、合成温度、保温时间和气氛对合成产物氮含量的影响。
The effect of heating temperature, holding time and cooling mode on its crystallizability and dissolution rate of potassium is not obvious.
改变合成温度、保温时间以及冷却方式等，对合成试样的结晶性能以及试样中钾元素溶出率的影响很小。
The effects of baking temperature, holding time and binder on secondary luminescence properties of phosphor were systematically explored.
研究了烧结温度、保温时间以及粘结剂对荧光粉二次性能的影响。
In this paper, the effects of calcination temperature, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.
研究了白云石的煅烧温度、保温时间以及掺量等对水泥物理性能和膨胀行为的影响规律。
The processing parameters of PEEK composites include cooling rate, forming pressure, forming temperature and the holding time in melt.
其成型工艺参数包括冷却速度、成型压力、成型温度、保温时间。
By changing heating temperature and holding time, the austenite grain growth behavior of a low carbon steel under different heating conditions was studied.
通过改变均热温度和保温时间，研究低碳钢的奥氏体平均晶粒尺寸与时间的关系，及奥氏体晶粒各尺寸范围的分布规律。
The result shows that the decarburization depth increases with the increase in temperature and holding time for the two steels.
结果表明，两种弹簧钢的脱碳深度随提高加热温度和增加加热时间增大。
The annealing process was made under different temperature and holding time to the cold forging AZ31 magnesium alloy with different deformation ratio.
对不同变形量的冷锻az31镁合金在不同温度和保温时间下进行退火。
The annealing process was made under different temperature and holding time to the cold forging AZ31 magnesium alloy with different deformation ratio.
对不同变形量的冷锻az31镁合金在不同温度和保温时间下进行退火。
应用推荐