Resin end anchored bolts shall be hot-dip zinc and epoxy coated.
完全采用灌浆的岩石锚杆，其最小要求应为热浸镀锌涂层。
SWRS82B wire was the raw material of hot-dip strand for long-span bridges.
SWRS82B热轧盘条是制造大跨度桥梁缆索用镀锌钢丝的原材料。
The amorphous phase is found in the outer layer of hot-dip aluminized layer.
结果发现，镀铝层的表面层存在非晶态金属相。
The upper cover is aluminium alloy, the other parts are hot-dip galvanized steel.
上盖板为铝合金件，隔板为铝制件，其余为热镀锌钢制件。
To introduce the production process of high speed hot-dip galvanizing production line.
介绍高速热镀锌钢丝生产线的生产工艺。
Continuously hot-dip zinc coated structural steels strip and sheet - Technical delivery conditions.
连续热镀锌的结构钢制的板材和带钢。交货的技术条件。
Cotter-pins are stainless steel, fasteners are hot-dip galvanized steel, the other parts are aluminium alloy.
闭口销为不锈钢制件，紧固件为热镀锌钢制件，其余为铝合金制件。
The composition and structure of hot-dip aluminizing samples are analyzed by using metallurgical microscope, SEM and XRD.
采用金相显微镜、扫描电镜、X射线衍射等研究手段，检测分析了浸铝镀层的成分和组织结构。
This paper presents the system design, control tactic and main circuit of control system for hot-dip galvanizing simulator.
主要介绍了热浸镀模拟试验机的系统设计、控制策略和重要回路。
Hot-dip galvanizing and hot-dip aluminizing are one of the most popular hot dipping technologies which are broadly used in society.
其中热镀锌和热浸铝技术是目前最常用的热浸镀技术之一，在生产生活中得到了广泛的应用。
Based on an analysis of the original design of the imported steel tube hot-dip galvanization line, theoretic verification of the design's drawbacks was made.
分析了引进的钢管热镀锌机组中螺旋的原始设计，从理论上证明其设计存在的缺陷。
Some problems existing in hot-dip galvanizing for evaporative condenser coil were presented and Suggestions on further research in the field were put forward.
指出了蒸发式冷凝器盘管热浸镀锌中存在的一些问题。并对该领域的深入研究提出了建议。
The results showed that the hot-dip aluminizing coatings on both the J55 and N80 steels were composed of aluminum layer and Fe-Al intermetallic compound layer.
结果表明：J55和N80钢热浸镀铝后的镀层组织均可分为纯铝层和铁铝金属间化合物层两层；
There is amorphous phase in diffusion layer of the hot-dip La-aluminizing and the content of the amorphous phase increases due to the addition of rare earths la.
热浸镀铝-镧钢的扩散层中存在非晶态相，且稀土镧的添加可使扩散层中的非晶含量增加。
The surface and cross-section of the pock flaws which appeared on the hot-dip galvanized coating were observed and analyzed by using SEM and energy spectroscopy.
通过扫描电子显微镜对热镀锌钢板镀层表面麻点缺陷的表面和断面形貌进行了观察，并对其进行了能谱分析。
Hot-dip galvanizing and continuous annealing dual-use line is a new type line, which can better adapt to the market demand of hot-dip galvanizing products and continuous annealing Products.
热镀锌和连续退火两用生产机组是一种新的机组型式，可以更好的适应市场对于热镀锌产品和连续退火产品的不同需求。
In continuous hot-dip galvanization process the corrosion and chemical stability of the sink roll in the galvanizing bath are important problem which effects on the quality and productivity.
在连续热镀锌生产过程中，在熔融锌槽中，沉没辊的耐蚀性和化学稳定性是影响产品质量和生产率的重要因素。
The microstructure of hot-dip aluminum coat of deformed low-carbon steel containing RE has been analyzed by metallography microscopy and XRD, and the forming mechanism has also been discussed.
用金相显微镜及X射线衍射仪对形变含稀土低碳钢热浸镀铝的镀层微观组织进行了分析，并探讨了其形成机制。
A portable corrosion rate meter was used to comparatively measure the annual corrosion rates of 20 steel tube and its integral hot-dip aluminizing coating in acidic and alkali corrosive mediums.
采用便携式瞬时腐蚀速度测量仪，对20钢及其热浸镀铝件分别在酸性和碱性介质中测定年腐蚀速率并进行比较。
The research status about of the microstructure, formation mechanism and growth kinetics of hot dip aluminizing coating is reviewed. Research directions for hot-dip aluminized steel are suggested.
综述了热浸镀铝钢镀铝层的组织、形成机理、生长动力学和扩散后组织的研究现状，指出了热浸镀铝钢今后的研究方向。
Dip your hand in to see how hot the water is.
把手伸进去看看水有多热。
According to whether need to be heated into hot dip and cold plastic raw materials, in accordance with the dip to points can be divided into liquid dip and dip powder.
根据是否需要加热分为热浸塑和冷浸塑，按照浸塑的原材料来分又可以分为液体浸塑和粉体浸塑。
Tin spray applied to circuit boards, hot air leveling and wave soldering, welding and hot dip tin lead anyone.
适用于电路板喷锡，热风整平，波峰焊、热浸焊和引线搪锡。
The Feature of modern hot dip galvanizing line are high output and high product quality.
本文介绍现代热浸镀锌线的特点是高产量和高质量。
We suggest that the main structure of the steel using hot dip galvanized processing, so that can greatly reduce the corrosion and rust of steel.
我们建议主结构的钢材采用热镀锌处理，这样能大大降低钢材的腐蚀及生锈几率。
Hot dip galvanized process flow: finished Pickling - washing - plating solution - drying - plating - cooling - Medicine - Cleaning - polishing - hot dip galvanized finish.
热镀锌工艺流程：成品酸洗-水洗-加助镀液-烘干-挂镀-冷却-药化-清洗-打磨-热镀锌完工。
High speed rail surface corrosion in the form of electroplating, hot dip, spray, dip, dip galvanized. High speed rail use effect.
高速护栏表面防腐形式有电镀、热镀、喷塑、浸塑，镀锌后浸塑。高速护栏使用效果。
The hot dip aluminum has been carried out to research the formation and dissolution of the intermetallic layer between die casting die and aluminum alloy.
为了研究压铸模与铝合金金属间化合物的形成与分解过程，进行了热浸铝试验。
The paper mainly focus on the development of hot dip aluminized coating, and analyzes the composing mechanism of plating process and its microstructure.
对热浸铝的历史进行了简要回顾，分析了其镀层组织结构及形成机理。
The paper mainly focus on the development of hot dip aluminized coating, and analyzes the composing mechanism of plating process and its microstructure.
对热浸铝的历史进行了简要回顾，分析了其镀层组织结构及形成机理。
应用推荐