Hydraulic steering and articulated frame.
液压转向，铰接车架。
This paper presents a kind of electro-hydraulic steering system.
介绍了一种电液动力转向系统。
Hydraulic steering pump is assembled behind of air compressor and is driven by cross block.
液压转向泵装在空气压缩机的后面，通过十字块驱动。
Superior steering system Use hydraulic steering, decreases the fatigue of the driver greatly;
优良的转向系统采用全液压转向器转向中大大减少操作者的疲劳；
Hydraulic vibration, hydraulic steering, the operation is simple, flexible, stable performance.
液压振动，液压转向，操作简单，灵活自如，性能稳定。
The characteristic of the full hydraulic steering system characteristic has obvious insufficiency.
全液压转向系统具有明显的不足转向特性。
6 double pump confluence full hydraulic steering system, easy operation, flexible, stable and reliable performance.
采用双泵合流全液压转向系统，操作轻便、灵活，性能稳定可靠。
The tractor adopts fully hydraulic steering system, steel ring press-fitted solid tires and central control panel with alarming function.
采用全液压转向系统、钢圈压配式实心轮胎和具有报警功能的新型中央式仪表板。
Full hydraulic steering equipment, central hinge in connection to roll-waist, small turning radius, flexible operation, high work efficiency.
全液压转向装置，中间铰接折腰转向，转弯半径小，操纵灵活，作业效率高。
Equipped with domestic 30-year mature walking system, American Parker hydraulic system and hydraulic steering device is more easy and reliable.
配置国内30年成熟的行走系统。美国派克液压振动系统，液力转向装置更加轻松可靠；
The small turning radius, more flexible, hydraulic steering system, flexible steering. The pilot operation of hydraulic system, easy to operate.
转弯半径小，更加灵活，液压转向系统，转向灵活。先导操作液压体统，操作方便。
Full hydraulic steering system is generally used on loaders of small capacities while its application on medium sized units is introduced in this article.
全液压转向系统一般用在斗容量较小的装载机上。
The deep well automatic vertical drilling tools positioning at thousands of meters, the hydraulic steering mechanism of them is demand of upper performances.
深井自动垂直钻井工具工作于数千米深的井下，对其上的液压导向机构的性能有较高的要求。
The full-hydraulic steering mechanism, with retractable steering articulated in the middle, at small turning radius, features flexible and efficient operation.
全液压转向装置，中间铰接折腰转向，转弯半径小，操纵灵活，作业效率高。
PTO according with international standard, hydraulic output interfaceadjustable treadmechanical or hydraulic steering are equipped with it for user's selection.
设有液压输出接口，用户可以根据需要进行液压输出；轮距可调；转向系统分机械转向和液压转向，用户可以根据需要自由选择。
This system consists of steering electronic control unit (ECU), all hydraulic steering, stepping motor, stepping motor driver and angular displacement sensor, etc.
该系统由转向电子控制单元(ecu)、全液压转向器、步进电机、步进电机驱动器、角位移传感器等组成。
This paper introduces the design of full-hydraulic steering system used in construction vehicles and USES the ADAMS software to set up a dynamic model of steering system.
本文介绍了工程车辆全液压转向系统的设计，应用adams软件建立了转向系统的动力学模型。
With CAN-bus technology, problem to control cooperated operation of its hydraulic steering system can be settled and intelligent control for the trailer travel is realized.
CAN总线技术能够解决其液压转向系统协同工作的控制问题，实现平板车行车的智能控制。
Based on the principle of power bond graphs, the modeling method for the hydraulic steering control unit type BZZ5 with the load sensing hydraulic steering system is introduced.
依据功率键合图原理，研究BZZ5型液压转向器和负荷传感全液压转向系统的建模方法。
Hydraulic steering easier in use problems are mainly the heavy steering, steering deviation, steering and steering made from time to time before the noise, such as abnormal sound.
液压转向机构在使用中容易出现的问题主要有转向沉重、转向跑偏、转向发摆和转向时有异响噪声等。
CCCD3B side forklift is a new type of lifting transport vehicles, which USES hydraulic transmission, full hydraulic steering, rolling doors, with a nice shape, convenient operation.
CCCD 3 B侧面叉车是一种新型的起重运输车辆，它采用液力传动，全液压转向，滚动式门架，具有造型美观大方，操作大件方便等特点。
Shift, the direction can not be "killed", especially when turning in place, it is necessary to leave some margin to ensure that the hydraulic steering system is in normal working condition.
转向时，不可将方向“打死”，特别是在原地转向时，要留有一定的余量，保证液压转向系统处于正常工作状态。
Requirements for hydraulic steering rack cylinder are very high, the rack cylinder should be durable, lubricants preservable and of seal. So, finish machining and parameter-set are necessary.
液压转向机对齿条杆部表面有很高的耐磨、储油、封存要求，为此需要一套表面超精加工工艺及加工参数设定。
Abstract: requirements for hydraulic steering rack cylinder are very high the rack cylinder should be durable lubricants preservable and of seal. So finish machining and parameter-set are necessary.
文摘：液压转向机对齿条杆部表面有很高的耐磨、储油、封存要求，为此需要一套表面超精加工工艺及加工参数设定。
According to the structure of hydraulic steering boosters and the work principle of steering system, design of the test circuit and test principle for a steering booster are introduced in the article.
根据液压转向助力器的结构和转向系统的工作原理，介绍了一种转向助力器检测回路的设计和测试原理。
According to the structure of hydraulic steering boosters and the work principle of steering system, design of the test circuit and test principle for a steering booster are introduced in the article.
根据液压转向助力器的结构和转向系统的工作原理，介绍了一种转向助力器检测回路的设计和测试原理。
应用推荐