Whirlpool Qibeng the impeller similar large gas turbines impeller.
漩涡气泵的叶轮类似庞大的气轮机的叶轮。
This invention relates to an impeller for data acquisition in a flow.
本发明涉及一种用于在流动物中采集数据的叶轮。
Here is the impeller of sea water pump, I think it isn't fit for use.
这里是海水泵叶轮，我认为它不适合使用。
The frame base is installed inside the fan frame to support the impeller.
一基座，设置于该外框内，用以承置该叶轮于其上；
And then removed the pump shaft shell removed send impeller repair shop repair.
然后将轴拆出泵壳，拆下叶轮送修理厂修理。
The objective of this paper is to build a software for axial fans' impeller designing.
主要工作是开发一种能用于工程实际的轴流风机叶轮设计软件。
It is suggested to use the refitted speedometer with mechanical impeller as the sensor.
提出用改装后的机械式叶轮风速表作为传感器。
With the floating impeller structure design, bring down the motor start and running load.
浮动叶轮结构设计，降低了电机启动及运行负载。
The trim exponents vary with the fluid viscosity and impeller diameter ratio at same time.
切割指数同时随着切割后的直径比和液体粘度变化而变化。
Here the air and water discharged from the return valve to the back entrance of the impeller.
在这里空气排出而水又从回流阀返回到叶轮入口。
CAD method for improving design quality and efficiency of centrifugal pump impeller is provided.
本文为提高离心泵叶轮的设计质量及效率提供了一个新的方法。
The results show that the kinetic energy in the impeller region is higher than in the bulk flow.
结果表明：湍动能分布不均匀，在叶轮区较高，而在主体区较小；
In the lobed impeller the measuring Chambers are the space between the lobes and the meter housing.
叶轮式测量室是叶轮和流量叶壳体间的空间。
It has guiding significance to improve the success rate of he dynamic Balance test for Impeller of fan.
对提高风机叶轮动平衡试验的成功率具有指导意义。
This pump impeller blades can be adjusted automatically to adapt to speed, fluid viscosity and pressure.
这种泵的叶轮叶片可以自动调节来适应转速、流体粘度和不同压力。
In the third chapter, the optimized models, the optimizing and the evaluating system of impeller are studied.
第三章研究了叶轮的优化模型，对叶轮的优化和评价体系进行了研究。
Impeller pump installed in the Shell 2, 3 and retention in the shaft, the shaft driven directly by the motor.
叶轮安装在泵壳2内，并紧固在泵轴3上，泵轴由电机直接带动。
Spindle quenched renew prime location bearing position, sealing position and the spindle head and impeller position.
主轴调质措置的首要位置是轴承位、密封位及轴头和叶轮位。
The rotor of the PMSM is fixed to the pump impeller of the artificial heart, and is levitated by a magnetic bearing.
电机转子安装在人工心脏泵的叶轮上，并因电磁轴承的作用而悬浮。
The volute suction shall contain a replaceable 400 Series stainless steel wear ring to match the impeller wear ring.
蜗形吸入室应该包含一个能够与叶轮抗磨环匹配的可替换400系列不锈钢抗磨环。
The relation between the flow conditions and material surface abrasive erosion of the pump impeller has been studied.
研究了过流条件与泵轮叶片表面冲蚀磨损的关系。
PW, PWF mainly by the pump cover, pump casing, impeller, shaft seal, shaft, and bracket the composition of such components.
PWF主要由泵盖、泵壳、叶轮、轴封、轴、和托架等零部件组成。
Conducting oil pump prime the pump, pump cover, bearing, bracket, shaft, seals, bearings, impeller of eight large component parts.
导热油泵首要由泵体、泵盖、轴承体、支架、主轴、密封、轴承、叶轮八个年夜的零部件组成。
The pump comprises mainly of pump body, cover, impeller, shaft, seal ring, intermediate support, sealing and suspension assembly, etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、中间支架、密封和悬架部件等组成。
Basic structure of the centrifugal pump is composed of six parts, namely: impeller, pump, pump shaft, bearing, seal ring, stuffing box.
离心泵的基本构造是由六部分组成的，分别是：叶轮，泵体，泵轴，轴承，密封环，填料函。
Impeller: Sure to change impeller if it has serious cavitations (main vanes in particular), over corrosion, wear and tear and breakage.
叶轮：严重汽蚀(特别是主叶片)、过度腐蚀、磨损、破损时，要求更换叶轮。
The pump casing, impeller, motor housing and stationary base elbow shall be manufactured of close-grained cast iron, ASTM A48, Class 30.
泵壳，叶轮，电机壳和固定底座弯头都应该采用符合美国材料试验协会ASTMA48级别30致密铸铁制造。
Former deputy leaves on the cover can reduce the imports of the vortex impeller and particle loss of the wear and tear on the seal ring.
前盖板上的副叶片可以减少叶轮进口的旋涡损失和颗粒对密封环的磨损。
The air Multiplier technology replaces blades and grilles with loop amplifiers and draws air in at the base through a mixed flow impeller.
空气倍增器技术用循环放大器，来替换扇叶和栅格，并且通过一个混流式叶轮把空气吸入底座。
The air Multiplier technology replaces blades and grilles with loop amplifiers and draws air in at the base through a mixed flow impeller.
空气倍增器技术用循环放大器，来替换扇叶和栅格，并且通过一个混流式叶轮把空气吸入底座。
应用推荐