The system is composed of industrial PC, DMC300 motion controller, discharge status checking card, A/D card, I/O card and pulse power.
该系统由工业PC，DMC300运动控制器，放电状态检查卡，A/D 卡，I/O 卡和脉冲电源组成。
Programmable controller and related equipment, should press easily and industrial control system as a whole, easy to expand its function design principles.
可编程序控制器及其有关设备，都应按易于与工业控制系统形成一个整体，易于扩充其功能的原则设计。
Through analysis, we can find the controller has routine PID merit and works well in time delay or non - linear system, so it can be popularized and applied to the general industrial process.
分析发现，该控制器具有常规pid的优点，对于大纯滞后或非线性系统能够很好地工作，可以推广应用于一般工业过程。
This paper develops a set of barycentre of plane automat Ed control system based on industrial personal computer and programmable logic controller aiming at the defect of avionics in our country.
针对目前我国机载航空电子设备特别是重心控制设备的落后现状，设计一套基于工业控制计算机和可编程逻辑控制器的飞机重心自动控制系统。
CAN bus industrial control network system is successfully developed by using Controller Area network (CAN) and distributed computer control technology.
本文采用控制器局部网(CAN)和分散型计算机控制技术，成功地研制了CAN总线工业测控网络系统。
This paper mainly introduces fuzzy controller and its application in industrial process. The controlling system based on fuzzy controller is more stable and reliable.
介绍了模糊控制器算法设计及其在工业生产过程控制中的应用，所设计的系统工作稳定性和可靠性较好。
An open CNC system with two CPUs in parallel, in which the center is PMAC motion controller and the supporting element is industrial PC, is suggested.
提出了一种以PMAC运动控制器为控制系统核心、工业控制机为系统支撑单元的双cpu开放式数控系统。
The integrated monitoring and controlling system is introduced, which is composed of industrial control computer and field monolithic data sampling controller.
介绍了由工业控制计算机和现场单片机采样控制器组成的干式有载调压变压器集中监控系统的设计。
The original relay control system of industrial washing machine is innovated and replaced by programmable controller, good stability and reliability of the system is achieved.
介绍了利用可编程控制器对继电器控制式工业洗衣机进行改造的过程，实现了系统的高稳定性和可靠性。
The structure of the hardware and software of an aviation gyroscopic test system combined by industrial control computer, interface controller and test adapter is introduced.
介绍了工业控制计算机、接口控制箱、测试适配器组成的航空陀螺综合测试系统的硬件和软件结构。
At last, a decoupling dual internal model controller matrix design method is proposed for multi-variable time-delay input-output system in industrial processes.
最后，针对工业过程中常见的多变量多时滞输入输出系统，提出了一种双内模解耦控制器矩阵的设计方法。
The article introduces an automatic control system of asphalt modification equipment, which makes use of PLC as core controller and industrial computer.
介绍了利用PLC作为核心控制器，使用工控机作为上位机，对改性沥青设备进行自动控制的系统。
Fuzzy controller is widely used in industrial control system for its robustness, relatively simple structure, quicker response and unnecessary for explicit mathematical model of the controlled object.
模糊控制器以其结构简单、鲁棒性强、不需要被控对象的数学模型及粗调快速等优点被广泛应用于工业控制系统。
Then we apply this kind of predictive function to the combustion systems of industrial boiler, through simulation of continuous system, we can conclude that this controller has strong robustness.
并将基于模糊补偿的预测函数控制应用于锅炉燃烧控制系统，通过连续系统仿真，结果表明这种控制器具有较强的鲁棒性。
Based on the introduction of industrial Ethernet technique, this paper describes a method of expanding an Ethernet interface using RTL8019AS Ethernet controller in the 80c196 single-chip system.
该文在对工业以太网技术阐述的基础上，具体介绍了在80c196单片机系统中，利用RTL8019AS以太网控制芯片，实现工业以太网接口的硬件电路设计及软件设计。
So it has wide range of application. Programmable controller (PLC) is the system merging the advantages of computer and industrial control system and it has strong locale adaptability.
可编程序控制器（简称PLC）是一种集计算机和工业控制系统优点于一身的控制装置，具有很强的现场适应能力。
A servo control system composed of PMAC2 controller, servo controller, servomotor and industrial control computer has been developed for carbon fibre production to control the draft ratio precisely.
研制了一套应用于碳纤维生产的伺服控制系统，该系统由PMAC2控制器、伺服控制器、伺服电机及工控机组成，实现对牵伸比的准确控制。
This paper introduces rebuilding electric control system of portal crane drived by DC and the application of digital DC speed controller, PLC and touchable industrial graphic monitoring system.
简要介绍直流驱动的门机电控系统改造，包括数字式直流调速器、PLC和触摸式工业图形监控系统的应用。
Based on fuzzy neural network, this paper presents a self learning controller used to industrial kiln temperature system.
本文提出一种模糊神经网络自学习控制方法，并应用于窑炉温度控制系统中。
The STD industrial controller is applied to the interface so that the module and flexibility of system are enhanced.
人机接口采用STD工控机，提高了系统配置的模块化和灵活性。
A kind of universal robot controller with open system architecture is present. Study and design of the controller is based on industrial PC.
介绍了一种面向多关节机器人的开放式通用控制器。
In this thesis we will develop a servo-system controller of the industrial sewing machine to meet the demand in textiles.
本课题的主要内容是研究开发一种高效的平缝机伺服控制器，以满足缝制业对平缝机伺服控制器的需求。
A real time on-line power quality monitoring system was designed, which based on industrial level controller ARM9.
设计并实现了电能质量在线监测装置，对电能质量的各项指标进行了监测。
A real time on-line power quality monitoring system was designed, which based on industrial level controller ARM9.
设计并实现了电能质量在线监测装置，对电能质量的各项指标进行了监测。
应用推荐