The design of cooling system for plastic injection mould has much to do with the production efficiency and product quality.
注塑模冷却系统的设计直接影响着注塑生产效率及塑件质量。
The mould structure was proved to be reasonable and reliable by practice, being valuable for the design of injection mould for similar parts.
经生产验证,该模具结构设计合理、可靠,对类似产品的注射模设计有很好的参考价值。
Injection mould feed system is an important component of the structure design of injection mould, and is also the only channel for molten plastic flowing into mold cavity.
浇注系统是注塑模具结构设计中的一个重要组成部分,也是塑料熔体进入模具型腔的唯一通道。
This thesis expounds the design of injection mould plastic.
论述塑料制品的注塑模设计。
The injection mould for a duplicator cover plate is designed.
设计了复印机盖板的注塑模具。
This thesis deals with the design of injection mould of plastic.
论述塑料制品的注塑模设计。
It mainly introduces the designing of winding rak injection mould.
介绍了线圈架注射模的设计,模具采用一模两腔结构。
The structure of the injection mould for the valve tee was introduced.
介绍了阀体三通管注射模的结构。
To supervise the everyday wk of injection mould maintenance management.
督导注塑模具日常保养和管理工作。
Designing and manufacturing sheet metal tool, injection mould, and more.
可进行冷冲模和注射模等各类模具的设计与制造。
The practical injection mould structure design for lampshade was presented.
给出了灯罩注塑模实用结构。
The hesitation effects of large injection mould are researched and analysed based on MPI.
利用专业模流分析软件MPI对大型注塑模具的滞流效应进行了分析、研究。
This paper will recommend the selecting method of standard mould base of injection mould.
该文将介绍注塑模标准模架的选用方法。
Application of NC programming in injection mould manufacturing is explained by the example.
以实例说明了数控编程在注塑模具制造中的应用。
A point gate was used for feeding in the injection mould for the transparent plastic box lid.
透明塑料盒盖注射模采用点浇口进料,脱模机构采用推板推出时,增设引气辅助推出机构,可确保制件顺利脱模。
Summarized some important experience on designing injection mould of plastic air intake manifold.
总结出了在设计塑料进气歧管注塑模具时要注意的几个问题。
My factory is good at making any kind of plastic blowing mould, injection mould and die-casting mould.
本公司擅长设计和制作各种吹塑模具,注塑模具和压铸模具。
The injection mould design of pressure head is introduced, and the points of design are also elaborated.
对押头注塑模设计的实例介绍,详细阐述了其中的设计要点。
The structure of the injection mould with automatic thread demoulding by the chain gear transmission is given.
给出了链轮传动自动脱螺纹注塑模结构。
Through the analysis of the drain valve of washing machine, an injection mould for the drain valve was designed.
通过对洗衣机排水阀塑料件的分析,设计了洗衣机排水阀注塑模。
This article mainly expounds the debugging process of injection mould after installing it on the injection machine.
本文主要阐述了塑料模具之一注射模在注射机上的安装之后的调试过程。
A novel internal core pulling mechanism of injection mould is designed for the part with internal full circle undercut.
针对具有整圆内侧倒扣特征的注塑件,设计了一种新颖的注塑模内缩机构。
A fuzzy predictive control algorithm was proposed for closed loop automatic control of stove temperature of injection mould.
针对注塑机炉温的闭环自动控制实现问题,提出了一种模糊预测控制算法。
The structure of injection mould for cylinder holder of fire extinguisher is introduced. The lateral core puller is simple and reliable.
本文对灭火器筒座的注塑模的设计结构进行了叙述,其侧向抽芯机构具有简易、可靠等特点。
Though mold CAE technology has already been used in injection mould and die casting mould design recently, there are still many problems.
近年来,模具CAE技术虽然已在注塑模、压铸模设计中得到应用,但仍存在不少问题。
And the mechanisms of forced demoulding, two_time ejection and delayed ejection by a sliding core used in the injection mould were introduced.
分析了沐浴露瓶盖的工艺特点,介绍了瓶盖注射模的结构及工作过程,并介绍了注射模设计中采用的强制脱模、二次顶出、滑动型芯延时顶出机构等。
Both of precise injection mould and precise injection molding are the key technologies in the process of rapid developing precise plastic parts.
精密注塑模具与精密注塑工艺是精密注塑产品快速开发的关键技术。
Both of precise injection mould and precise injection molding are the key technologies in the process of rapid developing precise plastic parts.
精密注塑模具与精密注塑工艺是精密注塑产品快速开发的关键技术。
应用推荐