Open the upper sea inlet valve and close the lower one.
打开高位海底阀，关闭低位海底阀。
Objective To design an air inlet valve for signal soldier ligebuoy.
目的设计一种单兵救生气囊充气阀。
Close the cold water inlet valve and open a nearby hot water faucet.
关闭冷水进水阀，打开附近的热水水龙头。
Implements by the relay to the electric motor, the inlet valve, draw-off valve's control.
由继电器实施对电动机、进水阀、排水阀的控制。
Using the "dry" temperature of air-fuel mixture before inlet valve as a criterion to ch...
证实了可用进气门前混合气的“干”温度作为评价进气预热效果的参数。
Aerodynamic stability of turbine inlet valve is the main reason of the vibration of valves.
透平进汽阀的气动稳定性是导致进汽阀阀体振动的主要原因。
The expansion engine which has a inlet valve without exhaust valve, is a short piston engine.
膨胀机为进气有阀、排气无阀的短活塞型。
This invention is applicable for the inlet valve of water turbine in the hydroelectric power station.
本发明特别适用于作水利发电站中的水轮机入口阀门。
The self-excited vibration system consists of a(C. E. T. ) unit, one-way air-inlet valve and one-way fu…
燃烧室-喷管，进气单向阀和进油单向阀组成一个自振系统；
The one-way air inlet valve (5) adopts a valve core type one-way air inlet valve or other one-way air inlet valves.
所说的单向进气阀（5）采用气门芯式单向进气阀或者其它单向 进气阀。
Inlet valve and seat, due to open and close more frequently, the liquid flow rate is high, sealing will soon expire.
进液阀芯和阀座，由于开启关闭比较频繁，液体流速高，密封很快就会失效。
The space above the piston is now sealed due to the inlet valve closing and the exhaust valve having already closed.
由于进气门关闭、排气门也已关闭，现在活塞上部的空间被密封了。
The fatigue rupture failure cause of the executing fork was analyzed for press off inlet valve of a piston compressor.
针对大型活塞式压缩机部分行程顶开进气阀调节装置，分析施力压叉产生疲劳断裂失效的原因。
The packing gland not skewed, leakage accords with a requirement, inlet valve open since pressure grouting pump, emptying.
盘车轻快自如无卡涩； 填料压盖不偏斜，渗漏符合要求，入口阀打开自压灌泵、排空。
The deprivator comprises thermal pour working section, transitional flowing section, inlet valve, outlet valve and dedusting by-pass system.
该热泳脱除器包括热泳工作段，过渡流动段，进口阀门，出口阀门以及清灰旁路系统。
If the drain hose does not have this rating, open the cold water inlet valve and open a nearby hot water faucet until water is no longer hot.
如果排水软管的额定温度没有达到上述要求，请打开冷水进水阀，打开附近的热水水龙头，直到水不热为止。
The utility model is composed of a handle, a pull rod, a barrel body, a piston, a bottom plate, an oil inlet valve, an oil outlet valve, etc.
本实用新型由手柄、拉杆、筒体、活塞、底板、进油阀、出油阀、等部件所构成。
But like the inlet valve, the exhaust valve needs time to reach the full-open position, it also needs time to reach the full-closed position.
但是像进气门一样，排气门需要时间到达充分打开和关闭的位置。
Provide Marine Engine Parts, such as Plunger & Barrel, Nozzle, Delivery Valve, Bearing, Sealing Bush, Exhaust Valve, Inlet Valve, Valve Seat, etc.
提供各式船用柴油引擎零件，如柱塞、喷油嘴、输油阀、轴承、轴封、出气阀、进气阀等零件。
When the temperature exceeds the threshold, the control sends out signal and controls the inlet valve so as to adjust the flame of the cooking range.
当温度超过限定值时，控制器发出信号并控制进气阀，从而调整炉灶火头大小。
The two operational modes were analyzed by the model controlled the steam inlet valve and the drain water valve based on the return water temperature.
对通过调节蒸汽进汽阀门来控制供水温度的现有运行方式和通过调节疏水阀门控制供水温度的新运行方式进行了仿真分析。
Pressing-off inlet valve is one of the methods of air-regulating for reciprocating compressor, and it possesses economic , safe and well-fixing character.
顶开进气阀进行气量调节是活塞式压缩机气量调节方法中的一种，它具有经济、可靠、结构简单及安装方便等特点。
Air regulating for reciprocating compressor with pressing off inlet valve was analysed particularly and the late research on such a system was introduced.
详细分析了活塞式压缩机顶开吸气阀排气量调节技术，并对新近研究工作做了介绍。
This paper briefly introduces constitutes and application of numerical simulation analysis system of gas dynamic performance for marine turbines inlet valve box.
概要介绍了船用汽轮机进汽阀箱气动性能的数值模拟分析系统的构成及其应用。
The invention relates to a dual-seal toilet stool, belonging to a sanitary ware and consisting of a toilet stool body, a mechanical seal device and an inlet valve;
一种涉及卫生洁具的双重密封坐便器，由坐便器主体、机械密封装置和进水阀组成。
Seal leakage test on the inlet valve under a hydrostatic pressure equal to maximum static head. The leakage shall not exceed the amount guaranteed by the Contractor.
对入口阀在最大静水压力下的密封泄漏试验。泄漏量不得超过承包商所保证的量。
Before closing the switch to allow electric current to flow to the heater, make certain that the heater is full of water and that the cold water inlet valve is open.
在打开电源开关之前，要确保热水器处于满水状态，冷水进水阀门处于开启状态。
This paper presents a new design of hydro extender VVT mechanism. The best matching inlet valve closing timing for advancement and retarding is achieved by the experiments.
详细阐述了液压张紧器式可变配气相位机构的设计，并通过试验获得了最佳气门关闭角的提前与滞后角度。
Traditional bin pump using the double gate valve as inlet valve. After material filled with large volume vessel, this system using a strong air flow to blow the material into silo.
传统的仓式泵一般采用双闸阀作为进料阀，在输送过程中采用“集中一次输送”，即使用大容积的发送罐，然后通过较大的气耗量将物料吹至接受仓。
This paper presents the method to simulate gas flow in a tuned induction system. It puts emphasis on describing the models to simulate the flow through the inlet valve and junction boundaries.
本文介绍了共振系统中气体流动的模拟计算方法，着重介绍进气门边界和分枝接头边界的模型处理。
应用推荐