A third workshop employing stone moulds for iron casting has recently been found in Huize county, Yunnan province.
最近在云南会泽县发现了第三处石范铸铁作坊。
Steel casting and iron casting may purchase nearby.
铸钢件、铸铁件可就近采购。
The production of gray iron casting without thermal aging was suggested.
在调查分析的基础上，提出取消灰铁热时效的看法。
Advanced technology of avoiding deficiencies in iron casting with resin sand.
树脂砂铸铁工艺在解决铸造缺陷方面的先进工艺技术。
Mold filling speed of iron casting in lost foam casting was experimentally measured.
通过试验测试了铸铁件消失模铸造的充型速度。
Pump body is by cast iron casting blank forming, severe wear new thing should be changed.
泵体是由铸铁铸造毛坯成型，出现严重磨损时应更换新件。
TINDER can provide alloy casting, gray iron casting, ductile iron casting, and, steel casting etc.
天哲公司提供各种牌号灰铁、球铁、合金铸铁、铸钢和合金钢等铸件。
Ash iron casting contain a lot of flake graphite, extremely easy cutting, commonly used to make a thick wall.
灰口铸铁中含有大量的片状石墨，极易切削，常用来制作厚壁件。
Besides electric, its most developed industries are: iron casting, rubber manufacturing, logistics and snack food industry.
该市主要产业包括：电子，钢铁铸造，橡胶制造，物流和快餐业。
A fully-welded steel structure frame was successfully developed and applied to a bending machine to replace conventional iron casting structure.
西安建筑科技大学粉体工程研究所成功地开发了一台卷板机，该卷板机机架采用全焊钢结构代替了传统的铸造结构。
This paper researched the microstructure characters on the cast-chromized layer of the iron casting and the steel casting by SEM and energy spectrum.
通过扫描电镜、能谱分析等方法，对铸铁件和铸钢件表面渗铬层的组织进行了研究。
Influence of the initial temperature fields and mold hardness on the shrinkage defect of ductile iron casting by EPC process was mainly investigated in this paper.
本文主要讨论了初始温度场和铸型硬度对消失模铸造球墨铸铁件收缩缺陷的影响。
In this paper, the theories, principles and technologies of proportional solidification are introduced briefly which can be applied to the iron casting production.
本文扼要叙述了均衡凝固的理论、原则和技术，可以作为生产应用的依据。
Cupola is the main melting equipment for iron casting production. By rough Statistics, there are more than 8000 of various melting rate cupolas in our industrial system.
冲天炉是铸铁件生产的主要熔炼设备，据粗略统计我国工业系统约拥有各种熔化率冲天炉8000座以上。
The filling speed of lost foam cast iron casting was measured by use of an integrated set of experimental equipment and a specially designed computer acquisition system.
研究了负压度、模样密度、浇注温度、金属静压头等工艺因素对消失模铸铁件充型速度的影响规律。
In the paper, based on the Propotional Solidification Theory and Large Orifice Discharge Theory, the foundry technology of gray iron casting shell was designed by the method of CAD.
论文根据均衡凝固及大孔出流理论，用计算机辅助设计的方法改进了壳体灰铸铁件的铸造工艺。
Mathematical model of the microstructure as well as the mechanical properties of spheroidal graphite iron casting was researched on the basis of solidification and thermodynamics theories.
根据结晶及相变动力学理论，建立了预测球墨铸铁件铸态组织及机械性能的数学模型。
Application Range: Applied to surface cleaning, polishing, and intensity of zinc alloy, aluminum alloy, cooper alloy, non-ferrous metal, exact stainless steel casting, steel or iron casting.
适用范围：锌合金、铝合金、铜合金、非铁金属、不锈钢精密铸件、钢、铁铸件的表面清理、光饰、强化。
Experimental result shows that the surface of ductile iron casting has a large amount of magnesium, and, there is a gradient distribution of magnesium from external to internal in the cross section.
实验结果表明，镁在球墨铸铁件表面大量富集，在整个横截面上由外到内呈梯度分布状态。
Industrial Valves, Iron casting pipes, auto mould, numerical control machine casting are their main products.
主导产品有工业阀门、铸铁管件、汽车模具、数控机床铸件等。
Application of Medium-Frequency Induction Furnace in Iron Casting Foundry / SU Jian-bo, LI Xiao-bin, XU Meng-xin.
中频感应电炉在铸铁车间的应用/苏见波，李晓宾，徐梦欣。
Thus transport of sulfuric acid pump usually high silicon cast iron (casting and processing is very difficult), high-alloy stainless steel (alloy No. 20) to create.
因此输送硫酸的泵阀通常采用高硅铸铁（铸造及加工难度大）、高合金不锈钢（20号合金）制造。
You can select casting iron, nodular cast iron, casting steel, forged steel, stainless steel, high-temperature steel, alloy steel, etc. for use according to your needs.
根据不同需要，材质可选用铸铁、球墨铸铁、铸钢、锻钢、不锈钢、高温钢、合金钢等。
This model was used for the technological transformat-ion of the iron-casting machine in Xiangtan Steelworks.
本文应用简化后的铸铁机力学模型对湘潭钢铁厂的铸铁机进行了技术改造。
This model was used for the technological transformat-ion of the iron-casting machine in Xiangtan Steelworks.
本文应用简化后的铸铁机力学模型对湘潭钢铁厂的铸铁机进行了技术改造。
应用推荐