A research is made of the limit analysis of stability calculation of reinforced embankment to perfect the design method of limit analysis of reinforced embankment.
为了完善加筋土路堤稳定的极限分析设计方法，对加筋土路堤稳定的极限分析计算方法进行研究。
The present paper is concerned with a problem of limit analysis of thin cylindrical shell with closed ends and different thicknesses under internal pressure.
本文研究充内压端封闭异厚度薄圆柱壳的极限分析问题。
This method has been used in computers for limit analysis of plane stress problems.
这种方法应用于平面应力问题的极限分析已在计算机上实现。
Since normal plastic theory is too complex, the membrane theory and the semi-membrane theory are adopted to establish the equilibrlm equations in plastic limit analysis.
鉴于有矩理论的复杂性，本文在作极限分析时，采用了无矩理论和半无矩理论的平衡方程分别作为中短壳和长壳的平衡方程。
The basic task of the structure limit analysis is to calculate the structure bearing capacity, which provides the essential, reliable basis for the determination of structure safety tolerance.
获得结构极限承载能力是结构极限分析的基本任务，它为确定结构的安全度提供了必要的可靠依据。
Plastic limit analysis is a physical nonlinear Problem.
塑性极限分析是物理非线性问题。
The third work of this paper is introducing the slope limit analysis program EMU into the analysis of slope monitor data.
本文的第三项工作是将边坡稳定极限分析程序emu引入边坡监测资料的分析中来。
The plastic limit analysis is applied to the unstable fracture load.
对失稳断裂载荷进行了塑性极限分析。
Limit analysis of reinforced concrete developed as a result of earlier research on steel structures.
极限分析作为对钢结构早期研究成果开发的钢筋混凝土。
The torsion of composite beams of steel and concrete and the limit analysis based on the theory of twisted members with thin walled open section and restraint of warping are discussed.
对钢与混凝土组合梁扭转进行了探讨，提出了以开口薄壁杆件的约束扭转理论为基础的扭转极限分析方法。
The plastic limit analysis of cylindrical reticulated shells has been studied in this paper.
本文探讨了圆柱形网壳结构的塑性极限分析。
Advances an improving rigid nonlinearity hardening approximate model of the constitutive relations using the traditional theory of plastic limit analysis.
应用传统的极限分析理论，对可简化为刚塑性的材料本构关系提出了一种改进的“刚性-非线性强化”近似模型。
The limit load calculation of welding piping tees under the action of the in plane bending moment was derived based on the limit analysis.
基于极限分析的观点，推导了工业中焊制三通在面内弯矩作用下的极限载荷估算式。
Based on the techniques of limit equilibrium and limit analysis, the formulae are given to calculate the ultimate bearing capacity of offshore pipeline in soft clay.
根据极限平衡和极限分析方法，建立了软黏土地基土体上海底管道的极限承载力计算公式。
This paper deduces the new maximum height formula of loading on soft clay ground by the method of plasticity limit analysis.
对软土地基堆载极限高度进行了塑性极限分析，得出了计算公式。
The distingUishing featUres of the paper are the influences of line loads on models of yield line, the method of selecting strips, and the method of the limit analysis of the slab under line loads.
文章的主要特点为线荷载对屈服模式的影响，条带的选取方法，线荷载作用下板的极限分析方法。
By moans of limit analysis and numerical computation, ultimate bearing capacity and limit sideline of slopes are studied quantitatively.
通过极限平衡分析计算，定量地研究了缓倾角边坡坡顶极限承载力和陡倾角边坡坡面极限边界线。
The paper deals with the problem of limit analysis of structures of combined axisymmetrical thin shells of revolution.
本文研究旋转轴对称组合壳体结构的极限分析问题。
In this paper, the method of singularity function is applied to the structural plastic limit analysis, and simplified the calculation of limit loads of some annular plates of fixed supports.
本文将奇异函数法应用于结构的塑性极限分析，简化计算某些固支环形板的极限荷载。
This paper discusses the inequality of the upper and lower bounds of the limit analysis of an isotropic plate with equal thickness when it is subjected to the action of various loads.
本文讨论了等厚各向同性板在多种载荷作用下极限分析的上下界不等式。
By introducing the generalized method of cells (GMC) into plastic limit analysis, the bearing capacity of ductile composites is studied.
本文将细观力学中的单胞(GMC)模型运用到塑性力学的静力极限分析中，研究韧性复合材料的塑性极限承载能力。
Based on the limit analysis viewpoint, a formula that could be used to estimate the in plane limit moment of welded branch pipe Tee was derived in this paper.
基于极限分析的观点，推导了工业中焊制管道三通在面内弯矩工况下的极限载荷估算式。
This paper studies the bounding problems of the complete solution of limit analysis for a rigid-perfectly plastic medium, allowing for discontinuity of plastic flow.
本文研究了非连续流动场中，刚塑性介质极限分析完全解的界限问题。
In this paper the reason and criterion of the application of the model to plastic limit analysis are discussed, and an algorithm of computing plastic limit load is given.
文中讨论了该模型适用于全塑性分析的机理和判据，还设计了一个确定塑性极限载荷的算法。
In this paper, the method of asymptotc for structural limit analysis is proposed by the high limit theorem for limit load.
本文根据极限荷载的上限定理，提出了结构极限分析的递近法。
The yield criterion of composite materials is simulated by using the homogenization method of micromechanics and the plastic limit analysis theory.
运用细观力学中的均匀化方法和塑性力学中的极限分析理论，分析了复合材料的屈服准则。
Based on the present practical application of the classical limit analysis method in slope engineering, some urgent problems in the limit analysis method of slope stability are discussed.
根据经典极限平衡分析方法在边坡工程中的应用现状，论述了边坡稳定极限平衡分析所面临一系列重大问题。
The parametric potential energy principle and the generalized parametric variational principle are developed in the limit analysis of the non-associated flow rule materials.
本文对服从非关联流动法则下的刚塑性极限分析问题，提出了参数势能变分原理和参数广义变分原理。
Some can get holomorphy solutions. In the course of plastic limit analysis, maybe there are the phenomena of producing yield-line.
在规则边界的薄板的塑性极限分析过程中，通常会有产生塑性铰线这一现象。
The parametric variational principle may be used to finite element analysis as in plastic limit analysis and in elastic contact problems.
如同弹性接触问题及极限分析中那样，该原理可望用于有限元数值分析中。
应用推荐