Requires a 7800 Master Controller.
需要一个7800主控制器。
Master controller is a kind of electric lifting.
主令控制器是起重电气的一种。
The master controller should be opened up and examined.
应该打开并检查主令控制器。
The master controller connects Ethernet and the slave control modules;
主控制器连接以太网和各从属控制模块；
Master controller is constructed of shell and explosion-proof components.
主令控制器由外壳和防爆元件等组合而成。
The proposed control structure consists of a slave system and a master controller .
控制系统包括主控制器和从系统两部分。
The paper mainly expatiates the realization of hardware and software of the master controller.
论文重点论述了主控制器的硬件和软件的实现。
The CAN subnets are coordinated by a master controller that also provides the gateway to the main CAN bus.
CAN子网由一个主控制器协调，该主控制器也为主CAN总线提供网关。
The master controller and customer multi-functional gas meter realize communication through telephone network automatically.
整个系统由主控端和客户多功能煤气表端组成，主控端与客户端通过电话线网实现自动抄表。
This new type master controller features short production cycle, long service life, high unification as well as light weight and so on.
该新型司机控制器具有生产周期短、使用寿命长、通用化程度高、重量轻等优点。
This equipment switched SPI data and Ethernet data from one to another is divided into SPI master controller module and Ethernet module.
通信分机一是一个多功能的模块化通信设备，从对外接口方面划分为SPI主控制器模块以及以太网传输模块两个部分。
The intelligence vortex flowmeter system is consisted of vortex sensor, temperature sensor, pressure sensor, LCD module and master controller, etc.
智能涡街流量计系统由涡街传感器、温度传感器、压力传感器、液晶显示模块、主控制器等几个部分组成。
The interface circuits include the PCI interface of the master controller, the interface of A/D converter and interface (HPI ) of the association processor.
接口电路又包括与主控制器的PCI接口，与A/D转换器的接口和与协处理器的接口（HPI）。
The access to the smart home control is mainly through the controllers. Smart home controller consists of a master controller and the slave control modules.
智能家居控制主要通过家居控制器实现，智能家居控制器包括主控制器和各从属控制模块。
The master controller uses a single-chip computer to collect, analyze, compute and compensate the signals of all sensors, and gets the needed data, then displays all data via the LCD.
主控制器使用单片机对各个传感器的信号进行采集、分析、计算，并进行补偿，得到所需数据，再将各种数据送到液晶显示器显示。
This paper introduces a design of embedded temperature monitoring system which is based on CAN bus, the entire system composes by the embedded controller sub-master and the Master controller.
介绍了一种基于CAN总线的可扩展的嵌入式温度监测系统的设计方法，整个系统由嵌入式分控器和主控器两大部分组成。
Second, provide the design and implementation method of the hardware of communication converter. Adopts PIC18F248 as the master controller, realize the interface conversion between RS232 and CAN.
其二，给出了通信转换器的硬件电路的设计和实现方法，通信转换器采用PIC18F248为主控制器，实现通信接口从RS232到CAN的转换。
Do not put the Infrastructure master role on the same domain controller as the global catalog server.
不要将结构主机角色放置在同时也是全局编录服务器的域控制器上。
With the upcoming release of Windows Server 2008, Microsoft has included a slight change to the multi-master model by introducing the Read-Only Domain Controller (RODC).
在即将发布的WindowsServer 2008版本中，Microsoft通过引入只读域控制器(RODC)，在多主机模型中进行了细微的改动。
Develops by the monolithic integrated circuit and the programmable controller primarily master control machine.
研制出以单片机和可编程序控制器为主的主控机。
The domain naming operations master ensures that domain names are unique. Only one domain controller in the enterprise performs this role.
域命名操作主机确保域命名是唯一的。在企业中只有一个域控制器起这个作用。
The designed PCI controller in this-subject, using a LCD display as backend device, performs the communication between PCI master and LCD display.
本论文所设汁的PCI总线控制器以LCD显示器为后端设备，完成PCI主设备与LCD显示器之间的通信。
After that a master DAMA controller and three slave DAMA controller and subscriber interface equipments have been accomplished.
在此基础上完成了一个主dama控制器和三个分站DAMA控制器及用户接口设备的研制。
The automatic paper tube polisher by use of the programmable controller Gold Star MASTER-K10 has been developed.
本文介绍韩国金星MASTER - K系列可编程控制器在自动磨口机上的应用、系统组成与程序设计。
According to the design requirements for flow control of a batching scale, this paper designs a batching scale controller with AT91SAM7X256 single chip microcomputer as the master control chip.
然后根据配料秤流量控制的设计要求，设计了以at91sam 7x256单片机为主控芯片的配料秤控制器。
Based on the object-orient analysis of CNC system, the paper proposes a design idea of master-slave CNC system, which builds with PC as upper chip and motion controller with DSP as lower chip.
本文在对CNC系统进行面向对象分析的基础上，建立了以PC机作为上位机，DSP运动控制器作为下位机的主从式数控铣床系统。
This paper puts forward CAN(Controller Area Network) field bus in the mine monitoring system to realize the design thought that mine monitoring system is economical, which can run at multi-master.
并将现场总线标准中的CAN用于矿井监测系统中，实现一种既能多主网络运行，又经济实用的矿井监测系统的设计思想。
This control system consisted of a host controller, multi master nodes , route nodes and sub nodes.
该控制系统由主控端、多个主控节点、各个终端子节点以及多个路由节点组成。
Can also functions as bus access priority and arbitration. Several single chip microcomputers can be connected to can bus through can controller to form a multi-master area controller network.
CAN具有优先权和仲裁功能，多个单片机可通过CAN控制器连接到CAN总线上，形成多主机的局部控制网。
Can also functions as bus access priority and arbitration. Several single chip microcomputers can be connected to can bus through can controller to form a multi-master area controller network.
CAN具有优先权和仲裁功能，多个单片机可通过CAN控制器连接到CAN总线上，形成多主机的局部控制网。
应用推荐