Plant process model will change if raw material property or variables change.
当带钢原料性质、处理量变化等也会导致过程模型发生变化。
Improvement of material property or connector with reinforce panel can ensure safety.
改善材质或者采用带加强筋的连接器可以保证安全。
The macros listed in Table 5.2.3 can be used to access material property variables. 5.2.
3存取材料性质的宏在表5.2.3中列出的宏可以用于存取材料的性质。
Women workers are not only producers of the material property, but also producers of human being.
女职工不仅是物质财富的生产者，而且还是人类自身的生产者。
We will employ a software package that I have been involved in designing for managing material property data.
我们还会使用我用来管理材料特性数据的软件包。
The impact of temperature dependent material property on the warpage of composite shell segment was discussed.
研究了温度敏感性对复合材料开口圆柱层压壳热翘曲变形影响。
The material property change with time and the influence of structure damage on the bearing capacity is analyzed.
对材料性能随时间变化规律和变异以及结构损伤对结构承载能力影响进行了分析。
The material is more special, namely the material property is more special and hang the dirt or knots easily burnt;
物料比较特殊，即物料性质比较特殊及易挂垢或结焦；
Material model of plywood is established to study change of material property in hot-pressing consolidation process.
建立了胶合板的材料模型，以研究热压固化过程中材料性能的改变。
The results indicate that the structure and quality of the extrudate are affected significantly by the material property.
结果表明，原料特性对脱脂花生粉挤压组织化产品的质量和结构有明显影响。
A calculation method for reliability of design parameters of tank, such as load, dimension, material property, was proposed.
提出了储罐系统可靠性设计参数(载荷、结构尺寸、材料性能)的计算方法。
Nondestructive testing of metal hardened depth is an important and difficult job, which belongs to material property testing.
金属表面硬化层深度的检测是一项非常重要而又困难的工作。
The nature of defects, as well as their recovery mechanism and influence on material property have been discussed from the results.
根据这些现象分析了缺陷的属性、快速恢复机理和缺陷对材料电学性质的影响。
Process parameters were found to obtain optimum effect of surface hardening, according to material property and technology requirement.
可根据材料的特性及技术要求，通过改变工艺参数得到理想的加工表面。
The construction, the material property and construction technique of double-layer Danpalon roof screen system are introduced in this paper.
介绍双层登普板采光屋面天幕系统的结构、材料性能和施工技术。
This paper introduced mightiness anchored bolt supporting system and its component, material property, matching manner and design essential.
介绍了强力锚杆支护系统的基本概况，阐述了强力锚杆支护系统的基本组成、材料特性、配套方式及设计要点。
In this research we used the DRM paradigm to see if there is any effect of experience, material property and processing level on false memory.
本实验采用DRM研究范式，考察经验、材料性质和加工水平三个方面对虚假记忆的影响。
Moreover, the influences of material property, section properties, tube length and thickness to ultimate deformation modes are studied respectively.
最后分别分析了材料性质、截面长宽比、管长和壁厚对最终变形模式的影响。
Strip rolling is a complicated nonlinear process. If strip material property or processing variable value is changed, process model will be changed.
带钢轧制是一个复杂的非线性过程，带钢原料性质、处理量变化等也会导致过程模型发生变化。
The reliability model of strength design of gun barrel is built on the basis of analysis about distributions of material property, loads and dimensions.
从分析火炮身管的材料、载荷和结构尺寸的离散性出发，建立了火炮身管强度设计的可靠度模型；
The model predictions will be influenced by the mesh density and generation method, the material property assignation and the applied boundary conditions.
模型质量将受到网格密度和生成方法、材料属性分配和应用边界条件等诸多因素的影响。
The change of material property depending on temperature was considered in computation. The element birth technique was adopted to simulate multi-pass weld.
计算中考虑材料物理性能随温度的变化，并运用单元激活技术模拟多道焊焊接过程。
Based on test results, a trilinear material property model is proposed, it permits the fire response analysis of steel structures to be made more accurately.
基于对试验结果的分析，提出了便于应用的钢材三折线高温材性模型，为较精确地进行结构火灾反应分析奠定了基础。
Porous material property shocked was studied and analyzed. Approximated jet speed calculation method was presented and compared with the measurement results.
对多孔材料的冲击特性进行了分析和研究，给出了多孔材料药型罩聚能射流速度的近似计算方法，并与实际测试进行了对比。
Micro-deformation measurement plays an important role in the analysis of material property, the reliability of components and the inspection of product quality.
微变形测量在材料性能分析﹑零部件的可靠性与产品质量检验中具有日益重要的作用。
Nondestructive testing and quality control of metal hardened-depth is an important problem to be solved in machinery industry. It belongs to material property testing.
金属表面硬化层深度的检测及控制是目前机械工业部门急需解决的一个问题，它属于材料检测的范畴。
AsCFRP has high tensile strength and GFRP has high ductility, it's necessary to study and analysis the mechanical performance change resulted from the two material property.
由于碳纤维具有很高的强度，玻璃纤维具有很好的延性，有必要对这两种材料特性导致的受力性能变化进行研究和分析。
Prior to the selection of the feeding device, the operation condition, material property, suitable range of the device, economy and other features shall be seriously studied.
选定供料装置前，必须对使用条件、物料特性，所需装置的适用范围、经济性以及其他特性等作认真调研。
Prior to the selection of the feeding device, the operation condition, material property, suitable range of the device, economy and other features shall be seriously studied.
选定供料装置前，必须对使用条件、物料特性，所需装置的适用范围、经济性以及其他特性等作认真调研。
应用推荐