The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
In the optimization phase, we develop a predictive model for the system to find useful operating conditions through response surface contour plots and perhaps mathematical optimization.
在优化阶段，我们开发了一个系统的预测模型，通过响应面的等高线图或者数学优化，去寻找合适的操作条件。
This mathematical model improves the design speed and quality of loader connecting rod mechanism has general applicability to the optimization design of RSCPM.
提高了装载机连杆机构的设计速度和设计质量，这种数学模型对于反转六连杆机构的优化设计具有普遍的适应性。
The mathematical model of optimization design for swing movable teeth drives is set, and the optimization design method is proposed in this paper.
本文建立了摆动活齿传动的优化设计数学模型，提出了优化设计方法。
Optimization mathematical model of special transformer electromagnetism parameters is a nonlinear programming problem with equality and inequality constraints, to meet some certain design objective.
特种变压器电磁参数的优化设计是一个带有等式和不等式约束，满足某种设计目标的非线性规划问题。
The paper designs a sum of square function, which is an optimization mathematical model that makes the residual sum of squares of wax deposition rate between the calculated and the measured minimum.
通过设计一个平方和函数，使蜡沉积速率的计算值与实测值的残差平方和为最小的优化数学模型成为一个无约束的非线性规划问题。
To express integrated optimization of multiple hubs location and mixed network design, a bi-level programming model was introduced for mathematical models.
为了描述多枢纽选址与混合网络设计综合优化问题，引入了双层规划模型建立数学模型。
An optimization mathematical model of cutting elements is founded by technical requirement and forced condition when turning. The optimum of cutting elements is got by using penalty function method.
根据车削时的加工要求和受力情况，建立切削用量优化设计的数学模型，采用惩罚函数法进行优化，得到了切削用量的优化结果。
Mathematical model for the optimization has been established in this paper. The design variables, range of design variables, target function and constrain function are confined.
经过比较、分析，建立了优化数学模型，确定了设计变量及其变化范围，以及约束函数和目标函数。
This paper proposes a new mathematical model and an algorithm for multi-objective optimization of the overall parameters of the most widespread powered support -shield.
本文提出了支撑掩护式液压支架总体参数多目标优化设计的一个新的数学模型和算法。
This paper puts emphasis on the discussion of constraint-based routing, its mathematical programming model is given and several common optimization algorithms are illustrated.
论文对基于约束的路由机制进行了重点论述，为其建立了数学规划模型，并给出了常用的优化算法。
By using Particle Swarm Optimization (PSO), a model was built up for calculating the optimum dispersion height of intrusive submunition dispenser, and mathematical simulation was carried out.
利用粒子群的优化算法，建立侵彻子母弹最佳抛撒高度的求解模型，并进行了仿真计算。
Optimization of two geared-linkage mechanism design is discussed. Mathematical model and calculating example are given.
本文阐述了两种齿轮连杆机构的优化设计，给出了最优化数学模型和算例。
The paper studies the mathematical model of the dynamic reactive optimization and the particle swarm optimization (PSO).
论文研究了动态无功优化的数学模型和粒子群优化算法。
The extended Lagrangian method is used for restraining the optimization technique and Newton iterative method for solving the mathematical model.
选用了增广拉格朗日法约束优化技术和牛顿迭代法求解数学模型。
A mathematical model for the optimization of gear dynamic performance is developed and the optimum gear profile modification parameters are then determined by the optimal design approach.
在动态分析的基础上建立了齿轮动态性能优化数学模型，以齿轮动态性能最优为目标，采用优化设计方法，确定最佳齿廓修形量和修形长度。
The mathematical model of CYJ10-3-37HB is established and the most optimal parameters are obtained according to optimization theory. Movement and momentum performance is analyzed.
根据优化理论，建立了CYJ10 - 3 - 37hb抽油机的数学模型，并求出一组最优参数，分析了其运动和动力性能。
For network planning, resource optimization was put forward, and a mathematical model of resource optimization was set up.
在网络计划中提出了资源优化问题，并建立了资源优化数学模型。
In this paper, a mathematical model and the selection of optimization method for equal strength optimized design of two-stage straight bevel gear-helical cylindrical gear reducer are introduced.
介绍了两级直齿圆锥—斜齿圆柱齿轮减速器等强度优化设计的数学模型及优化方法的选取。
Based on multi-parameter, multi-objective and multi-constraint of helical gear reducer, the optimization mathematical model was established.
针对斜齿轮减速器优化设计的多参数、多目标、多约束特点，建立了多目标优化数学模型；
With the use of computer technology and optimization method, a mathematical model for DHCR Rolling Program planning has been established and a system of DHCR Roling Program has also been developed.
结合DH CR的特殊要求，运用计算机技术和整数优化的方法，建立了dhcr轧制计划编制的数学模型，在此基础上开发了相应的计算机计划编制系统。
Multiobjective optimization is a useful mathematical model in many areas, such as economics, engineering, and decision making, to solve real world problems with conflicting objectives.
对于经济、工程、决策等领域中带有冲突目标的实际问题，多目标优化是一个有用的数学模型。
Mathematical models for pipe diameter optimization and pump station optimization calculation were constructed, solution to model was determined and LINGO optimization software package was introduced.
建立了管径优化与泵站优化计算的数学模型，确定了模型的解法并引入了LINGO优化软件包。
A mathematical model for an ovoid spiral scanning system with airborne laser for underwater object detection is developed and a scheme for dot matrix uniformity optimization is proposed.
建立了机载激光水下目标探测中的卵形螺旋线扫描系统的数学模型，提出了点阵均匀性优化方案。
And the mathematical model for the calculation of the technological process optimization was built through artificial neural net simulation of the technological analysis of the plastic part.
通过对塑件工艺分析的人工神经网络模拟，建立了可供工艺优化计算的数学模型。
Using the optimization theory a mathematical model which maximizes the square of the distance between the project to be evaluated and the worst scheme is established, and the exact solution is given.
该方法以优化理论为依据、以待评方案距最劣方案的加权距离的平方的极大值为优化目标，建立了新的数学模型，并给出了精确解。
This paper has set up more comprehensive mathematical model and the detailed research is carried out economic optimization analysis for the whole cold-end system.
建立了较为全面的数学模型，从冷端整体出发，对冷端系统进行经济性优化分析。
Based on the double water model and the program system, GCDQ for optimization of log interpretation, a new mathematical model for optimization of log interpretation has been developed.
在双水模型和测井优化解释程序系统GCDQ的基础上，建立了新的测井优化解释数学模型。
The mathematical model of the optimization design, which takes the motion characteristics of paper-feeding tooth as the objective function, was established, and the solving method was discussed.
建立了以递纸牙运动特性作为目标函数的优化设计数学模型，探讨了求解方法。
应用推荐