The principle of kinds of measuring probe was analyzed, and elementary diagram and site installation drawing were compared for better understanding.
文章对各种测量探头的原理进行了分析，理论结合实际，将原理图和现场安装图进行对照，通俗易懂。
This is a device that is used for dimensional measuring, that USES a moving measuring probe to obtain the coordinates of points on an object surface.
这台设备用于空间测量，使用一个运动的测量探针获得物体表面某点的坐标。
The utility model discloses a wireless measuring device for detecting ultraviolet illumination intensity, which comprises a measuring probe (1) and a main receiver (2).
本实用新型公开了一种用于紫外光照强度检测的无线测量装置，该装置由测量探头（1）和接收主机（2）两部分构成。
The non-water cooling type rapid temperature measuring probe and the composite thermocouple type temperature measuring probe for tuyere and blow pipe were developed at Anshan I & S Co.
开发研制了高炉风口回旋区非水冷快速测温枪和风口风管组合电偶测温枪。
Measuring apparatus consists of an optic probe, transmission system, a radiation source, a detector and electric circuits.
测量装置由光学探头、传输系统、光源、探测器和电路组成。
A method of using metal probe for measuring the void fraction at any point in gas-liquid two-phase flow on Sieve tray is described.
用金属探针法测量塔板上气液两相流中某些点的含气率。
The probe is based on an incremental glass scale insuring the best dimensional accuracy over the whole measuring span.
探头以增量光栅为基础，确保在整个测量范围中最好的空间精度。
The measuring methods of D C TIG welding arc anode sheet surface current density split sheet method and probe (made by ourselves) method were analysed and compared.
对直流TIG电弧阳极板表面电流密度的测量方法——分离极板法和探针（自制）法进行了分析比较。
The experimental results show that the probe has good frequency response characteristics which meet the requirement of measuring voltage distribution of thyristor in converter valve.
实验结果表明，这种探头有较好的频率响应特性，能满足换流阀晶闸管电位分布测量的需要。
The Heat flow probe is the common-used device in measuring seafloor heat flow, which is one of the most important items of geophysical investigations.
热流探测是一项重要的基础地球物理调查项目，使用探针式热流计测量海底热流是常用的方法。
A new measuring technique is presented which makes use of an annular roller probe to obtain the data of complex surface and the measurement principle is discussed.
论文介绍了一种利用圆环形滚轮测头测量复杂曲面的新技术，提出了反求曲面廓形数据点的测量原理。
Experiments and methods for measuring plasma potential with emissive probe and capacity probe are described.
本文给出了发射探针和电容探针测量等离子体电位的实验和方法。
In this paper a method of measuring differential surface photovoltage spectrum with liquid probe has been reported.
本文报导了一种液体探针表面光电压微分谱测量方法。
With an improved Angle measuring method, the accuracy of SAW velocity measurement in a laser probe is improved.
本文改进了激光探针测速系统中的测角方法，提高了测量精度。
The measuring system with microcomputer for inlet and outlet flow field of the Francis turbine runner is described. The pitot probe with 5 holes was used as sensing element.
本文研制的微机检测系统用于转轮进出口流场测量，系统采用5孔探针为感应元件，全部数据处理及计算都由计算机完成。
Adopting the engaging process of the measuring rack - probe, the error of straight generatrix is measured, and by error analysis, the tooth profile error and tooth orientation error can be obtained.
采用刃边齿条测头，测量齿轮廓面的直母线偏差，通过误差分析分离出齿廓总偏差和螺旋线总偏差。
A stereovision inspection system for measuring free-form surface is introduced which consists of coordinate measuring machines (CMM) and a laser probe.
介绍了利用安装于三坐标测量机CMM上的激光测头测量自由曲面的立体视觉检测系统。
The probe method for measuring the thermal conductivity of multifunction material hollow glassy microsphere is presented.
介绍了一种用探针法测定多功能新材料空心玻璃微球热导率的方法。
A novel in-situ measurement technique is proposed for simultaneously measuring the complex permittivity and permeability of high-loss material using a flanged open-ended coaxial probe.
本文提出一种开口同轴探头现场同时测量高损材料复电磁参数的新方法。
The paper proposes a stereo vision coordinate measurement system based on optical probe with the function of measuring and calibrating.
提出了一种基于测量与校准功能合一的光学测棒的立体视觉坐标测量系统。
A probe is provided for that measuring.
提供用于进行该测量的探针。
The measuring system consists of a CNC coordinate measuring machine , PH9/PH10 probe head and LB? 12 non-contact laser probe.
由程控三坐标测量机、PH9／PH10回转体和LB—12型非接触激光测头构成测量系统；
Some experimental results of the potential distribution in MM-4 fusion device are presented by measuring the floating potential of probe.
本文描述了用静电探针测量探针悬浮电位的方法，给出MM-4中电位分布的实验结果。结果表明轴向电位分布不对称，径向分布对称；
The measuring principle and method of CMM's probe error based on the least-square method are introduced.
介绍了基于最小二乘法检测坐标测量机探测误差的原理和方法。
This paper presented a measuring system that can test skins color and reflecting spectra with optic fiber probe.
本文介绍了光纤探头式皮肤反射光谱分析和颜色检测系统。
Now a laser triangle measuring device instead of test probe is installed on the three-coordinate measuring machine, but this method is still limited by the three-coordinate measuring machine itself.
改进的方法是将激光三角测量头装在三坐标机上以代替触针，从而实现了非接触测量，但此法仍然受到三坐标机本身的限制。
In ultraprecision machining, multi probe methods are widely used for measuring the straightness error of the workpiece to separate the straightness motion error of the carriage.
在超精密加工中，用多测头方法测量工件直线度时，需要采用误差分离的方法分离出溜板的运动误差，并用一定的算法重构工件表面的直线度。
The location of the crack can be found by the change of the apparent resistivity, based on four-probe electrical resistivity measuring technique.
基于四探针电阻率测量技术，依据试验测得的混凝土表观电阻率变化确定裂缝位置。
The kinematical equation of the probe and the equation of measuring error caused by the swaying of the measuring arm are established.
建立了测头的测量运动方程和关节晃动引起的测量误差的方程。
The kinematical equation of the probe and the equation of measuring error caused by the swaying of the measuring arm are established.
建立了测头的测量运动方程和关节晃动引起的测量误差的方程。
应用推荐