Test used to check for adhesion of a coating to the surface usually following a mechanical test.
通过一个机械试验检查表面涂层的附着力。
This spray effect KFC door in mechanical strength, adhesion, corrosion resistance, aging, etc. are superior to the painting process.
肯德基门的这种喷涂效果在机械强度、附着力、耐腐蚀、耐老化等方面都优于喷漆工艺。
Mechanical performances and cell adhesion of simple spiral and 3-strand spiral scaffolds are similar.
单螺旋和3股螺旋两种丝状支架的力学性能和细胞黏附性能相近。
Test results with the new adhesives, including mechanical testing, primary adhesion and accelerated environmental testing show performance equivalent to the traditional products.
用新粘合剂进行了力学试验、初始粘合强度试验和快速环境试验，结果表明其性能与传统产品相当。
The results of SEM and FT-IR suggest that good adhesion in the interfaces of composites is observed and mechanical properties are improved by adding special film-forming agent into immersion agent .
经SEM和FT-IR的研究结果表明：在浸润剂中添加了成膜剂后，复合材料的界面可以达到良好的结合状态，材料的力学性能也有明显提高。
This paper inquired into deeply the reason for being high strength in the puffing-inside adhesion of YW 1 inorganic adhesive from the Chemical, physical and mechanical.
本文从化学、物理、机械三方面深入地探讨了YW -1无机胶套接粘接形成高强度的原因。
They provide outstanding reduction of virus, bacteria, cysts, endotoxin and many other submicron particles through both electro-adhesion and mechanical processes.
他们可以通过电子粘附和机械工艺显著减少病毒、细菌、胞囊和很多其他的亚微颗粒。
In a composite system, the adhesion at the interface between fiber and matrix plays an important role in improving the resulting mechanical behavior.
良好的界面粘结是制备高性能复合材料的关键之一，而树脂与纤维的优良浸润则是其首要前提。
Surface quality adhesion to substrate and corrosion resistance of zinc coating of mechanical plating are described. The deposition model is proposed and is confirmed by experimental results.
阐述了机械镀锌层的表面质量、结合力及其耐蚀性，提出了机械镀锌的沉积过程模型。通过实验数据及分析加以验证。
The curable polyester of the present invention is excellent in curability and has excellent flexibility, adhesion and mechanical strength, and also exhibits high safety to the human.
本发明的可固化聚酯具有优异的固化能力、柔性、粘附性和机械强度，并且对人体高度安全。
The adhesion mechanism of para-disubstitution phenolic adhesives for rubber and polyester cords is presented. (1) coarse mechanical anchoring strength in structure of cords;
提出了橡胶和聚酯帘子线粘合的机理：（1）粘合剂对纤维表面的机械粘合力；
Traditionally, when joining dissimilar materials is needed, solid phase joining, adhesion and mechanical joining are used.
传统上，当加入不同的材料是必要的，固相连接，粘接和机械连接的使用。
As the hardening temperature increases, the speed hardening and degree of the adhesive JD increase, the mechanical and adhesion performances of the adhesive systems can be further improved.
而且随着固化温度的提高，胶粘剂体系的固化速度和固化程度还会进一步增加，力学性能、粘结性及耐热性能也会进一步提高。
Plasticizer had strong effect on the mechanical properties of SPU sealant. The more plasticizer was added, sealant of weaker mechanical properties and adhesion property was obtained.
增塑剂的种类对SPU密封胶的力学强度有很大影响，随着增塑剂加入量的提高，力学性能和粘接性能下降。
The oxide coatings prepared by this technique have a dense structure, high adhesion and excellent integrated mechanical properties. Many studies have been carried out in this field recently.
利用该技术制成的氧化膜结构致密，结合强度高，具有优良的综合力学性能，近年来在该领域的研究一直较为活跃。
A method is presented to manipulate microspheres using liquid bridge forces to overcome the influence of adhesion during micro-electro-mechanical system assembly.
为了克服粘着对微机电系统装配的影响，提出了一种利用液体桥力实现微球转移操作的方法。
It is shown that the homogeneous dispersion of ha reinforce the adhesion between the ha and polymer, which resulted with increasing the mechanical...
结果表明，HA的均匀分散增进了复合材料中两相间的相互结合，能明显地提高复合材料的力学性能。
The binding straps for mechanical use feature super length and super slimness, light specific weight, low unit cost, good elasticity, flexibility and tensile strength and strong adhesion.
且机用打包带具有超长超薄、比重轻、单位成本低且弹性好、韧性强、拉力好、粘贴力强的特点。
It shows good matrix-carbon fiber adhesion between the treated CF with fracture surface morphology and PA6. the mechanical property of composite is enhanced compared with pure PA6.
复合材料断面照片显示处理后的碳纤维和基体尼龙6材料有着很好的界面结合。
The adhesion mechanism between Aqueous Polymer Isocyanate (API) adhesive and bamboo was studied by means of Dynamic Mechanical Analysis (DSC).
文中采用差示扫描量热法(dsc)对api胶粘剂的固化机理进行了研究。
The adhesion mechanism between Aqueous Polymer Isocyanate (API) adhesive and bamboo was studied by means of Dynamic Mechanical Analysis (DSC).
文中采用差示扫描量热法(dsc)对api胶粘剂的固化机理进行了研究。
应用推荐