Dynamic mechanical analysis was applied to the aging assessment of stator insulation.
本文把动态力学分析用于大电机环氧云母绝缘的老化状态诊断。
The requirement in accuracy for mechanical analysis with the hydrometer is presented also.
根据国内外资料提出了使用比重计法分析土颗粒的精度要求。
It mainly discussed the applications of thermal mechanical analysis and micro-thermal analysis.
它主要包括热机械方法和微区热分析法。
The mechanical analysis is made on anti-slide pile with a new model of finite difference method.
通过抗滑桩结构的力学分析，建立了抗滑桩结构的有限差分模型。
Meanwhile, it can be used for the mechanical analysis and numerical integration of fabric and garment.
可用于对织物和服装的数值化力学分析计算。
The mechanical analysis of the bit in the process of drilling is the bas- is of bit trajectory prediction.
对钻头在钻进过程中的受力分析是准确预测钻头轨迹的基础。
Dynamic mechanical analysis (DMA) could be used to evaluate the effect of softening treatment with heat and water.
动态热机械分析(DMA)可以用来评判水热处理竹材的效果。
The storage modulus and damping factor of composites were also characterized through dynamic mechanical analysis (DMA).
此外，采用动态力学分析(DMA)进一步表征了复合材料的储能模量和阻尼因子。
The present paper gives a historical summary of the mechanical analysis of human head under direct impact in recent years.
本文试图回顾近几十年人头颅受直接撞击作用的力学分析的研究进展情况。
Mechanical analysis has been done on driving and reverse driving states, then a vehicle dynamic testing model is developed.
通过对驱动和反拖两种状态的力学分析，建立了汽车动力性检测模型。
This paper mainly performs the design and mechanical analysis and research on cold extrusion mold of the gear axis in cars.
本文主要对汽车用齿轮轴的冷挤压模具进行了设计和力学分析研究。
Through mechanical analysis and numerical calculation the possibility of reducing gap the width is discussed in this paper.
本文通过力学分析和数值计算，讨论减小缺口宽度的可能性。
The truss structure scheme choice, load analysis and mechanical analysis, joint analysis and implementation are introduced.
对该桁架结构的选型、荷载分析、力学分析、节点分析及工程实现等方面进行了分析。
The mechanical analysis and design were carried out on filter chamber shell, heating jacket and machine frame of melt filter.
对熔体过滤器的滤室壳体、加热夹套及机架进行机械分析和设计。
The mechanical analysis showed the biomechanical compatibility was also improved by adding BGC into nanophase titania ceramic.
结果表明：纳米氧化钛陶瓷复合材料的生物活性、力学性能、蛋白吸附能力随。
More researches are badly needed to establish dynamic failure modes of rock mass and to carry out quantitative mechanical analysis.
但岩体动力破坏模式的建立和定量的力学分析还需更多研究。
Effect of surface state of filler on dynamic mechanical properties of composites was investigated with dynamic mechanical analysis.
本文采用动态力学分析研究了填料表面状态对复合材料动态力学性能的影响。
Based on mechanical analysis on rheological characteristics of MR damper, a novel MR damper with helix slotted plunger is developed.
该文基于对MR阻尼器流变特性的力学分析，研制了一种活塞表面刻有螺旋凹槽的新型MR阻尼器。
By using strict mechanical analysis and mathematical treatment, three rock-bit interaction models reported in literature are analyzed.
本文通过力学分析与数学推导，对已有的三种钻进模型进行了分析推理。
The axial load and centralizer spacing from the bottom to the top are calculated by using the mechanical analysis method and the log data.
采用力学分析的方法，结合测井资料，由下到上计算了抽油杆柱的扶正器间距和轴向力。
The stress, strain and displacement in pavement structure can be computed by the mechanical analysis program of the multilayer elastic system.
应用多层弹性体系力学分析程序计算路面结构的应力、应变和位移。
The traditional optimization design is only based on the minimum cost objective function and does not consider the mechanical analysis target.
传统的优化设计仅以最低造价为目标函数，没有考虑结构的受力性能指标。
A mechanical analysis of the geological structure of Dongming Depression is conducted by applying the limit equilibrium theory of complex rocks.
应用复杂地质体极限平衡理论，研究了东明凹陷地质构造力学成因机理。
The change rule of the contact pressure, nucleation process and character were investigated by the coupled thermal-electrical-mechanical analysis.
通过结构、热电场的全耦合，分析了焊接过程中接触面压力变化规律，单边焊熔核形成过程以及形核特点等。
The correctness of design for the connecting mechanism was illustrated with the mechanical analysis based on the analysis method and graphic method.
用解析式及图解法的静力学分析说明了连接机构设计的正确性。
The axial load and centralizer spacing from the bottom to the top are calculated by using the mechanical analysis method and the well trajectory data.
采用力学分析的方法，结合井眼轨迹数据，由下到上逐跨计算了抽油杆柱的扶正器间距和轴向力。
According to the mechanical analysis of bridge crane's grab, the mathematical model between crane's horizontal movement and grab swing is established.
根据起重机抓斗的受力分析，建立了起重机水平运行与抓斗摆动关系的数学模型。
The thermal mechanical analysis for the coupled problems of interaction between heat transfer and contact processes can be found in many engineering fields.
考虑传热接触耦合作用的热力学分析问题大量存在于工程中，分析的难点是必须考虑热与可移动接触边界间的耦合作用。
The failure form of joint, mechanical analysis of joint, joint design and test methods of adhesive bonding of composites are presented briefly in this paper.
本文简略叙述复合材料胶接的接头破坏形式，接头力学分析，接头设计及测试方法。
The mechanical analysis of operating the high temperature high pressure deep well testing pipe string is one of the key techniques in testing engineering design.
高温高压深井测试管柱的工作力学分析是测试工程设计的关键技术之一。
应用推荐