Then three-dimensional geological and mechanical model was established, and study of spatial deformation characteristics with FLAC-3D (Fast Lagrangian Analysis of Continua) was detailed.
并建立了相应的三维地质力学模型，应用FLAC 3D快速拉各朗日差分程序对其空间变形特征进行了详细的分析。
The paper USES finite element method to calculate the whole reel structure of a ship lift and presents the mechanical model of finite element analysis for the structure as a whole.
采用有限单元法对升船机卷筒结构进行整体计算，提出了有限元分析的力学模型，对筒壳、幅板的强度及刚度作了全面分析。
Analysis and numerical result shows that the laws of mechanical vibration control system are realized in this circuit model and the model can perform expected function.
分析及数值结果证明该电路模型实现了机械振动控制系统的本身的规律，可以实现预期的功能。
Landslide is the scope of geomechanics, the establishment of an appropriate model of the mechanical structure, the theoretical stress and strain analysis.
滑坡属于地质力学的范畴，建立适当的力学结构模型，进行理论上的应力应变分析。
It still is a difficult subject for most drilling engineers to predict and control well path by applying the mechanical analysis of bottom hole assembly and the rock-bit interaction model.
利用下部钻具力学分析和钻头与地层相互作用模型来预测和控制井眼轨道对于大多数钻井作业来说仍是一个难题。
On the basis of analysis of previous mechanical models, a multi degree model with a distributed mass is established.
在分析研究现在常用力学模型的基础上，建立了多自由度分布质量模型。
The foregoing provides a basis for the selection of oil-film force model during the nonlinear dynamic analysis and design of an actual rotating mechanical rotor-elliptic bearing system.
研究结果为在实际旋转机械转子-椭圆轴承系统进行非线性动力学分析和设计时，选择油膜力模型提供了依据。
Based on the analysis of the structure and vibration of HCM-I Submicro CNC Ultra-precision Turning Machine, the mechanical model of active vibration isolation system is set up in the paper.
本文以HCM_I型亚微米超精密车床为研究背景，在分析了机床结构与振动的基础上，建立了机床主动隔振系统的力学模型。
The mechanical analysis is made on anti-slide pile with a new model of finite difference method.
通过抗滑桩结构的力学分析，建立了抗滑桩结构的有限差分模型。
Through the force analysis of the main vibration system about the CDQ electromagnetic vibration feeder, the vibration mechanical model is established and the dynamics parameter is computed.
通过对干c DQ电磁振动给料机主振动系统的受力分析，建立振动力学模型，并进行动力学参数计算。
The vibration mechanical model of gantry and bridge crane is established by means of structural analysis.
通过对门桥式起重机的结构分析，建立了其振动力学模型。
Analysis screw pump system, get the mechanical model of rod string, deduct and calculate undertaking load of rod string.
通过对螺杆泵采油系统进行分析，得到抽油杆柱力学模型，并对杆柱所承受载荷进行推导计算。
A mechanical model for the fractured roof and truss system is established based on stability theory for elastic system and analysis of stability of a dynamic system.
应用弹性系统稳定性理论对断裂顶板-锚拉支架系统建立了动力系统稳定性分析的力学模型。
Mechanical analysis has been done on driving and reverse driving states, then a vehicle dynamic testing model is developed.
通过对驱动和反拖两种状态的力学分析，建立了汽车动力性检测模型。
The analysis of mechanical model shows that the fracture toughness is improved by residual compressive stress of substrate surface, which resists the tensile deformation of substrate.
力学模型分析表明，基体残余压应力以抵抗基体拉伸变形的方式提高了铬层的断裂韧性；
A recently developed hardware of the model system including the signal collecting and processing, designing principles etc for mechanical fault analysis is introduced.
论文介绍了一种最新研制的机械系统故障诊断模拟系统的硬件部分及其组成、设计和测量原理、信号采集和处理等。
Resorting to a simplified mechanical model, this paper makes a theoretical analysis of the dynamic response of the gantry crane and loading bridge when their their trolleys collide with buffers.
本文用简化的力学模型对龙门起重机和装卸桥小车撞击缓冲器时的动力响应进行理论分析。
The mechanical model of the dynamic analysis of quick-return mechanism in the planer is established by complex vector method.
运用复矢量法建立了刨床急回机构动态静力分析的力学模型。
According to the mechanics analysis method of BHA and the real work state of drill string in inclined straight well, a mechanical model of BHA is presented.
根据现有钻具力学分析方法和斜直井钻具的实际工作状态，建立了斜直井下部钻具力学分析模型。
The simplified mechanical model is proposed with analysis of forces of abutments in this paper.
通过基牙的受力分析，提出了基牙的简化力学模型。
Based on the analysis on all kinds of load while the pump valve is working, we establish the corresponding mechanical model.
对泵阀工作时的各种载荷进行了分析，建立了相应的力学模型。
This paper presents a mathematical model, a scheme of optimum methods and basic computation formulas for optimum design of mechanical antivibration characteristics based on model analysis.
本文提出以模态分析为基础的机械抗振性能优化设计数学模型、优化设计方法方案及基本运算公式。
The mechanical hypothesis and geometry model of the composite tapes were set up. The finite element analysis models in the process of the composite tapes' shaping were established.
建立了超导复合带材的细观力学假设和模型、以及成型过程的有限元分析模型。
In pipe laying and lifting analysis, the contact condition between pipeline and seabed, including deflection, rotation Angle and bending moment, is sometime tricky in a normal mechanical model.
海底管道的铺设分析和提升分析都用到管道和海床之间的接触条件，这个同时含有挠度、转角和弯矩的接触条件，在一般的力学模型中是很难理解的。
By using the methods of theoretic analysis, model experiment and spot test, the mechanical condition of tunnel bed, the mechanism of tunnel bed disease and the treatment measures are studied.
运用理论分析及模型试验和现场试验的方法，对铁路隧道基底结构的受力状态、病害产生的机理以及病害的整治措施进行研究。
This paper deals with the mechanical model from FEM analysis and the structural optimum design, which can be computed by means of the program system DDDU-2.
本文探讨了某特种车车身的有限元分析和结构优化设计的力学模型，利用DDDU - 2程序系统进行了计算。
According to the mechanical analysis of bridge crane's grab, the mathematical model between crane's horizontal movement and grab swing is established.
根据起重机抓斗的受力分析，建立了起重机水平运行与抓斗摆动关系的数学模型。
Based on the theory of aerodynamics, engineering thermodynamics, the mechanical model for air spring vertical dynamical characteristics analysis is built and proved to be correct by test.
应用空气动力学、工程热力学理论，推导空气弹簧垂向动态特性分析的数学模型，经过试验验证模型的正确性。
Based on the theory of aerodynamics, engineering thermodynamics, the mechanical model for air spring vertical dynamical characteristics analysis is built and proved to be correct by test.
应用空气动力学、工程热力学理论，推导空气弹簧垂向动态特性分析的数学模型，经过试验验证模型的正确性。
应用推荐