Advanced finite element techniques for the simulation of materials behavior under mechanical loading are reviewed.
评述了机械载荷下材料力学行为有限元模拟的先进技术。
Magnetoelastic forced vibration of a thin round plate subjected to mechanical loading in magnetic field is studied.
研究了电磁场环境下机械载荷作用圆形导电薄板的磁弹性强迫振动问题。
Concrete structures are subjected to both mechanical loading and environmental attacks during their entire lifetime.
混凝土结构在使用过程中要经受荷载与环境的双重作用。
Mechanical loading can promote bone-tissue growth and develop, sustain the integrity of structure and funtion of bone.
力学负荷可促进骨组织生长发育，维持骨结构的完整性和功能。
This could help to better understand the mechanical loading of biological structures e. g. the processes in fracture healing.
这有助于更好地理解诸如骨折愈合过程等情况的生物力学特性。
ANSYS mechanical and ANSYS Structural products assist in identifying stresses that develop during the standard mechanical loading of telecom enclosures.
ANSYS机械和结构产品用于识别电磁附件标准机械负荷下的应力。
Recent studies suggest that the risk factors for marginal bone loss around implants are smoking, infection, mechanical loading, bone quality and metabolic diseases.
近期的研究认为种植体边缘骨吸收与吸烟、感染、机械载荷和代谢性疾病等有关；
Human periodontal ligament cells were cultured on the elastic bottom plate and stimulated by elastic stress using mechanical loading system for cultured cells in vitro.
人牙周膜细胞在弹性膜上体外培养，采用体外培养细胞加载系统加载弹性牵张力。
Objective to design a new kind of thermocycling and mechanical loading (TCML) chewing simulator and test the chronic fatigue characteristics of dental materials and prosthesis.
目的研制冷热循环机械载荷咀嚼模拟疲劳试验机来人工模拟口腔环境的温度变化和咀嚼负荷，检测口腔材料的疲劳寿命。
Because of the staggering complexity of the in vivo environment, studying cellular responses to mechanical stress and strain has relied heavily on the use of in vitro mechanical loading systems.
由于在体环境异常复杂，细胞生理或病理现象的研究仍依赖于细胞体外分离和培养技术，因此，构建细胞体外加载实验系统是目前研究细胞的力学响应机制的主要途径。
Mechanical properties and fracture mechanism of high strength steel sheet with low yield ratio under impact loading have been studied through instrumented impact and quasi-static tensile tests.
通过室温下的仪器化冲击试验和静态拉伸试验，研究一种低屈服比高强度钢板在冲击载荷下的力学性能和断裂机理。
The condition presented here is not only dependent on the mechanical properties of the material, out also on the loading boundary condition and deformation.
这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形。
There is essential difference between the mechanical condition of unloading engineering rock mass and loading engineering rock mass.
卸荷状态工程岩体的力学条件与传统的加载岩体有本质的区别。
The mechanical behavior of architectural structure made up of PVDF-coated architecture membrane, is very complex under exterior loading.
使用PVDF涂层建筑膜材制成的结构，在承受外载荷情况下，力学行为非常复杂。
Besides, coal mechanical parameters as limit strength and failure style between loading and unloading test have been compared. These conclusions have a plenty for rock mechanics.
将卸载试验与常规三轴加载试验的极限强度、破坏方式等力学参数进行对比，试验结论丰富了卸载岩石力学内容。
The mechanical condition of unloading engineering rock mass is essentially different from traditional loading rock mass.
卸荷状态工程岩体的力学条件与传统的加载岩体有本质的区别。
Due to the difference in stress paths between the loading and unloading conditions, it is unsuitable to apply mechanical model under loading condition to stability of tunnel excavation.
由于岩体在加载和卸载条件下应力路径的不同，仅采用加载条件下所建立的力学模型来研究隧道的开挖稳定性问题是不适合的。
Therefore, it is necessary to study mechanical properties of thin film materials under different loading conditions.
因此，研究薄膜材料在不同加载条件下的力学性能十分必要。
Aiming at solving existing problems for the conventional mechanical close gear test platform, a computer controlled hydraulic loading system is designed.
针对传统的机械闭式齿轮试验台存在的问题，设计了一种计算机控制液压加载系统。
The effects of CFRP( carbon fiber reinforced polymer) strengthening on the mechanical performance of short plain - concrete columns were researched by loading tests of 18 short - column specimens.
通过18根短柱试件的加载试验，研究了CFRP（碳纤维复合材料）加固对素混凝土短柱力学性能的影响。
Research results demonstrate that the 10t fast loading equipment is applicable to study on dynamic mechanical properties of soft rocks under medium strain rate.
实验结果表明：10吨快速加载机适用于软岩在中等应变速率下的动态力学性质的研究。
A mechanical model is built firstly for single microcrack under uniaxial compression loading, and the stress component of microcrack end is calculated.
首先建立单一微裂纹在单轴压缩荷载作用下的力学模型，求出裂纹端部的应力分量。
The mechanical properties, biological behaviors, health protection and recovery of the articular Joints are effected by the loading on the articular cartilage.
人体关节与软骨的力学性能和生物学行为，关节的保健与康复，均受关节软骨承受的载荷的影响。
MIRANDA MS2is recommended for USES in the parts under high friction and shock loading in heavy-duty vehicles and also for heavy loading mechanical equipment.
万灵达ms2推荐应用于重型车辆的高度磨擦及振动负荷的部位，碳酸盐也适合于其他重负荷机械设备。
The influence of the groundwater, seismic loading and the coupling of the two on the mechanical behavior of the underground excavation in the jointed rock mass is investigated.
本文主要讨论地下水、地震荷载以及地下水与地震耦合作用对节理岩体中地下洞室围岩力学响应的影响。
The mechanical behavior of rock mass under unloading is different from that of rock mass under loading.
裂隙岩体在加载和卸荷条件下的力学特性有显著的区别。
The effects of surface treatment and weight loading of glass-fiberon mechanical and thermol properties of fiber reinforced PVC composite (GF/RPVC)are presented in this paper.
本文考察了玻璃纤维增强聚氯乙烯复合材料（GF／PVC）中玻璃纤维的表面处理及加入量对力学性能的影响。
Effects of treatment on the surface morphology, mechanical properties and the slurry loading on templates are studied.
对处理前后有机模板的表面形貌、力学性能及对涂覆量的影响进行了研究。
The installation of the exhibits may require mechanical and electrical work, and loading and unloading equipment may call for an additional work force.
布展可能需要机械和电力劳动，而装卸设备可能求额外的劳力。
The installation of the exhibits may require mechanical and electrical work, and loading and unloading equipment may call for an additional work force.
布展可能需要机械和电力劳动，而装卸设备可能求额外的劳力。
应用推荐