The idea of meshing therapy with the dramatic arts isn't new.
其实把戏剧艺术与治疗相结合已经不是什么新鲜事了。
There is something wrong with this machine, the wheels aren't meshing properly with each other.
这台机器出了毛病，齿轮相互间啮合不当。
The erosion of traditional barriers within economics and the increased meshing with other disciplines will continue.
经济学内部传统障碍的削弱以及经济学与其他学科增强结合的趋势将继续下去。
An investigation on the meshing characteristics of face gear drives is made in this paper.
本文对面齿轮传动的啮合特性进行了较系统、深入的研究。
His voice winds through the air and through the tattered mosquito meshing of our guesthouse window.
他的声音风一般从破旧的旅店纱窗飘了进来。
And the approximate meshing condition is also analyzed.
并对齿面的啮合状况进行了分析。
A new type of arc cycloidal internal meshing rotary pump was studied.
对一种新型圆弧摆线内啮合转子泵进行了研究。
These formulae are suitable for any contacting point of tooth surface meshing.
这些公式适用于齿面啮合的任何接触点。
The existence of elastic meshing effect was verified indirectly through experiment.
通过实验间接验证了弹性啮合效应的存在。
The biggest tension is at meshing point of driving gear and this value is very big.
锯链的最大张力发生在驱动链轮啮入点附近，其数值相当大。
The modification of gear is a principal method for improving performance of meshing.
齿面修形是提高齿轮副啮合性能的重要手段。
An elastic meshing feature extraction method based on the stroke density is proposed.
提出了一种基于笔画密度的弹性网格特征提取方法。
Analyses the internal gear tooth profile by using conjugate outline's meshing theory.
利用共轭齿廓的啮合理论对内齿轮进行了齿形分析。
A new rolling type of spherical enveloping worm gearing with point meshing is proposed.
提出了一种新型滚动式球面包络点啮合环面蜗杆传动；
An effective triangle -meshing algorithm of sections based on STL file form at is set up.
根据STL文件的特点，建立了一个有效的截面三角剖分算法。
The governing equation of a gear system with time-varying meshing stiffness is established.
建立了具有时变啮合刚度的二级齿轮系统的动力学方程式。
And analyze the contact strength of the roller and sprocket wheel while in meshing process.
分析链条和链轮啮合时，链轮和滚子的接触强度。
Designing of external gear shaper cutter with large tip relief Angle can improve the meshing quality.
滚刀、插齿刀设计成较大的修缘角，有利于提高啮合质量。
At last, based on motion transmission, the state of meshing in no load and load condition is studied.
根据本文所建立的谐波齿轮传动运动传递模型，对空载和载荷下啮合情况进行了研究。
The size of meshing area is an important index for evaluating the smoothness and noise of ZC1 worm drive.
ZC1蜗杆传动啮合区面积大小是衡量其传动平稳性和噪声的重要指标。
The distribution of the contact stress of FG is obtained in the different meshing locations during the meshing.
获得了在啮合过程中不同的啮合位置面齿轮的接触应力的分布规律。
Principles and thinking of DEM was creatively introduced into dynamics analysis of the gear meshing rotor system.
创造性的把DEM的原理和思想方法引入到齿轮啮合转子系统的动力学分析中。
The gear teeth and meshing line are distorted in the meshing process as a result of wearing and rise in temperature.
实际应用中，由于磨损和受热等原因，使得齿轮齿廓以及啮合过程中啮合线都发生了畸变。
A mathematical model of spiral bevel gear tooth surface was built by analyzing manufacture method and meshing theory.
通过分析锥齿轮的加工方法和齿轮啮合理论，建立了螺旋锥齿轮齿面数学模型。
Gear transmission with belt as meshing medium is a new gear transmission, which is economic and environment friendly.
带式啮合介质齿轮传动是一种新型的齿轮传动形式，具有经济、环保的特点。
A new analogue analysis model on the inner circle grinding is set by meshing the grinding area of work-piece surface.
借助于工件磨削区域的分割和砂轮表面的离散化处理，建立了一种新的内圆磨削模拟计算模型。
The error correction model of tooth surface was established by machine tool adjustment parameters and meshing principle.
结合机床调整参数、齿轮啮合原理，建立了螺旋锥齿轮齿面误差修正模型。
It also provides an effective method and theory basis for the study of different transmission types of meshing engagement.
也为其它类型啮合传动的研究，提供了有效的方法和理论基础。
Additional dynamic load during Spiral bevel gear meshing is main cause of vibration and noise. Based on national standard.
螺旋锥齿轮啮合时产生的附加动载荷是螺旋锥齿轮传动产生振动、噪声的主要原因。
Additional dynamic load during Spiral bevel gear meshing is main cause of vibration and noise. Based on national standard.
螺旋锥齿轮啮合时产生的附加动载荷是螺旋锥齿轮传动产生振动、噪声的主要原因。
应用推荐