The Tap Water Meter Calibration Station plays an important role in the respect of accurate calibration.
水表计量检定站在水表的准确计量检定方面发挥着非常重要的作用。
Visible light intensity meter calibration experiment platform is designed to take advantage of dual-channel detection method.
利用双通道检测方法设计了可见光光强计标定实验平台。
This paper presents a method of signal analysis and data processing using a single chip microcomputer in the contrast method of water meter calibration facility.
本文提出了在比较法水表校验装置上采用单片微机进行信号分析和数据处理的方法。
It is suitable to be used as precise inductance standard for all kinds of metrology units, research institutes, and manufacturers, and especially suitable for on-site LCR meter calibration.
适用于各计量、科研与生产部门作精密电感标准，尤其适用于对LCR表进行现场校准。
By analyzing each error source of power meter calibration device, the uncertainty of power meter calibration device is analyzed and calculated with mathematical statistics and experimental method.
通过对电能表校验装置的各项误差源的分析，利用数理统计和实验方法对电能表校验装置的不确定度进行分析和计算。
It provides a new reliable method for the study of calibration technology in field for laser energy meter.
为激光能量计现场测试校准技术的研究提供了一种可靠的新途径。
Information such as speed, heading, GPS difference equipment can also be the vehicle of various sensors (such as log, speed meter, magnetic compass, etc.) for the calibration work.
速度、航向等信息，车载GPS差分设备还可以对车辆上的各种传感器(如计程仪、车速仪、磁罗盘等)进行校准工作。
A calibration equipment for personal dose meter is described.
本文介绍一种个人剂量计校准装置。
The microwave power meter adopts dynamic calibration method and reduces request of the memory space and time expenses of the processor which can have more resource to deal with the metrical data.
在微波功率计标定中采用动态标定方法，有效地降低了存储器空间要求和处理器时间开销，处理器有更多的资源进行测量数据处理。
Methods the calibration of the survey meter in SSDL should be done for determination of the relation of different reading-type survey meters as well as the correct factor of it.
方法用在标准剂量学实验室校准的方法，获得不同类型防护仪的校准因子和测量结果的相互关系。
A tethered float ultrasonic power meter has been built. Its measuring principle, design, calibration, error analysis and advantages are described in this paper.
本文说明所研制的悬链式超声功率计的基本原理、结构设计、校准、误差及其优点。
In this paper, the hardware structure and software flow for a portable optical power meter are described, and a method of calibration of this instrument and its measured performance are presented.
介绍了一种便携式光纤功率计设计的硬件结构和软件流程，给出了其标定方法和实测性能指标。
Carries on the calibration equation using the transmission near-infrared meter FOSS1241 scanning spectrum the establishment.
利用透射型近红外仪FOSS1241扫描光谱进行定标方程的建立。
On the basis of the discussion a calibration method for voltage fluctuation and flicker meter is put forward.
在此基础上提出了一种校验电压波动闪变仪的方法。
This paper describes a rapid weight-loss method for the on-line calibration of conductivity moisture meter.
本文采用快速失重式水分测量装置作为水分标定装置，对电导式水分仪进行在线标定。
The calibration principle and method of the near region field strength meter are described, especially its auto calibration and test system and the study of software.
介绍了近区场强仪的核准原理和方法，着重介绍了近区场强议的自动校准测试系统和软件的研究。
The power meter has simple structure, convenience calibration and good linearity, and can quickly and accurately measure various wave lengths laser power.
该功率计结构简单，标定简便，线性好，能快捷准确测量多种波长的激光器的功率。
Composite water flow Calibration Facility that our unit designed, makes up of standard metal tank group, standard flow meter, water-supply system, pipeline system, control cabinet and diverter mainly.
本单位设计的水流量综合标准装置，主要由标准金属量器组、标准流量计、供水系统、管路系统、控制台和换向器组成。
The on the spot inspection of natural gas orifice meter is adopting the transitivity calibration method taking Venturi nozzle as calibration scale.
天然气孔板流量计的现场检定，采用以文丘里音速喷嘴作为标准表的传递型校准法。
To ensure the correct torque, torque sensor, torque meter, torque tools must be strict calibration, calibration method of many of the most basic is used weights, standard lever.
为确保扭矩的正确，扭矩传感器，扭矩测试仪表，扭矩工具等必须要严格标定，标定方法很多最基本的是用砝码，标准杠杆。
The static calibration and dynamic contrast test are performed, which demonstrate high measuring accuracy and stability of the novel meter.
此文介绍其组成及工作原理，并进行了烟度计的静态校准和动态的对比试验。结果表明，该烟度计测量准确，稳定性好。
The measuring device designed according to the scheme can be used not only as a calibration instrument but also as an operational meter. Its precision attains 0.5%.
根据这种方案设计的测量装置，其精度可达0.5%，它可作为校验仪器，也可作为工作仪表之用。
The calibration of dew point hygrometer and micro-moisture meter in ultra-low humidity range was done by using precision dew point hygrometer and low range humidity generator.
利用精密露点仪和低露点湿度发生器对超低湿露点仪和微量水分仪进行了校准，并对超低湿情况下露点标准值的准确度进行了分析评估。
In order to calibrate the thermal mass air flow meter by the method of standard flow meter, this paper designs a suit of thermal flow meter's calibration test-bed.
设计了一套热式流量计的标定试验台，用标准流量计法，对热式流量计进行标定。
Traditionally the flowrate of returning activated sludge was measured by open channel flowrate meter with higher error, difficult transform of flowrate coefficients and inconvenient calibration.
以往常采用明渠流量计测回流污泥量，不仅误差大，而且流量系数转换、标定都十分困难。
Several thoughts on site calibration of electric energy meter are proposed.
本文就电能表现场校验工作提出几点思考意见。
And its calibration method study took that of the whiteness meter as reference.
参考白度计的校准方法对铅芯浓度仪的校准方法进行了研究。
According to this industrial situation, a computer control calibration system with gas flow standard device by the master meter method is researched and designed.
本文针对这样的工业现状，研制了一种标准表法气体流量标准装置计算机测控系统。
This paper introduce in detail the principle of the calibration of resistance box by method of direct current digital voltage meter, mathematics model and the way of uncertainty evaluation.
详细介绍了用直流数字电压表法校准电阻箱的原理、数学模型及测量不确定度评定方法。
This paper introduce in detail the principle of the calibration of resistance box by method of direct current digital voltage meter, mathematics model and the way of uncertainty evaluation.
详细介绍了用直流数字电压表法校准电阻箱的原理、数学模型及测量不确定度评定方法。
应用推荐