Here we introduce a method and equipment of on-line linear data identification for a swing mathematic model.
本文介绍一种对摇摆数学模型线性参数在线辨识的方法和装置。
This paper advances a new method of area identification geometric model pixel identifying method according to the pixel distinguishing function of computer upon the monitor.
本文根据计算机对显示器的象素识别功能，提出一种新的区域识别方法——几何模型象素识别法。
A mutual model reference adaptive method for the rotor speed and stator resistance identification is proposed in this paper to implement a speed sensorless direct torque control of induction motors.
本文介绍了一种可互换模型参考自适应方法实现对电机转速和定子电阻的辨识，并将其应用于异步机的无速度传感器直接转矩控制中。
The model identification is an identifying method of equipment state.
模型识别是设备状态的识别方法之一。
The model parameters of controlled objects were obtained with relay feedback identification method.
通过继电反馈辨识方法获得被控对象模型参数。
On the basis of traditional time series analysis and modeling methods, the thesis puts forward a new complete and simply identification method by using ar model.
本文在传统时间序列分析建模方法的基础上，提出了用AR模型的新的完整而又简单的辨识方法。
This dissertation presents the studies of genetic algorithms (GA) based model structure and parameters conjunct identification, PID optimization, and the engineering application method.
本论文是基于遗传算法(GA)的模型结构和参数共同辨识、PID参数的优化整定和工程应用方法的研究。
Since the identification method does not approximate the outputs of relay and process as sinusoidal signals, the obtained SOPDT model can represent the process dynamics more accurately.
由于该辨识方法没有将继电和过程输出近似为正弦信号，获得的SOPDT模型能更准确地反映过程的动态特性。
It takes the expressway macro dynamic traffic flow model as prototype and analyzes the characteristics of expressway traffic flow with "Segment Identification Method".
以高速公路宏观动态交通流模型为原型，利用分段辨识法分析了高速公路交通流特性。
The principle and application of a discerning method of distribution model is presented, which could improve the accuracy concerning distribution model identification of product life.
介绍了一种分布模型识别方法的原理及县体应用，有利于提高产品寿命分布模型识别的准确性。
This paper presented a parameter identification method based on the structure of human fuzzy control model known, and tried to identificate parameters of the model.
本文根据已知的人的模糊控制模型，提出了一种参数辨识方法，并进行了参数辨识实验。
In this paper, the flutter derivatives of a thin plate model under the simultaneous actions of wind and rain are identified by using the Covariance-Driven Stochastic Subspace Identification method.
本文采用随机系统识别方法，在模拟的风雨共同作用条件下识别了薄平板模型的气动导数。
A simultaneous identification method of model order and parameters has been established in this paper.
本文提出一种同时辨识单输入-单输出线性定常系统差分模型的阶次和参数的方法。
A dynamic model identification method of electro-hydraulic servo turntable based on wavelet theory is proposed, which has a higher identification precision compared with traditional methods.
针对电液伺服转台数学模型辨识精度不高问题，提出一种基于小波理论的电液伺服转台动态模型识别方法。
The on-line identification of the model can be achieved by a simple ELS method.
用简单的ELS方法实现模型的在线辨识。
The practical engineering example shows that the rheological model identification is easy to make and higher accuracy of fitting curve can be obtained with this method.
工程实例计算表明，该方法具有拟合精度高、便于模型辨识等优点。
The simulation experiment shows that the parallel processing method obtains sub - linear speedup , and the requirement for real - time identification of internal model on-line is basically satisfied.
仿真实验表明，并行处理方法达到亚线性加速，可以较好地满足实时在线辨识内部模型的应用需求。
The identification method for the one dimension time series, open loop and closed loop system are developed by use of model ARMA.
讨论了一维时间序列开环系统、闭环系统的辨识方法及定阶问题。
The method for the multiple model failure detection is presented based on wavelet neural network and the designed neural network observer to increase the precision of the identification.
提出了一种利用小波神经网络辨识非线性系统多模型故障的方法。
NKJ-1 model crop drought resistance identification instrument was manufactured on the basis of continuous rising temperature conductance method (CRTC). Put forward first by Chen Yuquan etc.
依据陈毓荃等首次提出的连续升温电导法(CRTC)，研制了NKJ - 1型农作物抗旱性鉴定仪。
This paper presents a new method for dynamic model identification of sensors, and gives the corresponding design processes and learning algorithm.
提出了一种传感器动态模型辩识新方法，给出了相应的辩识过程及学习算法。
A method based on the set-membership identification theory for the parameter identification of a helicopter fully coupled flight dynamics model is presented.
提出了一种基于集员辨识理论的直升机全耦合飞行动力学模型参数辨识方法。
Then, rationality of the dynamic model and parameter identification method is verified by experiment.
通过实验验证了其力学模型和参数识别方法的合理性。
Joint dynamic stiffness and damping were identified via solving the former identification model by use of least square method (LSM) or neural network method.
分别采用最小二乘法和神经网络方法对上述方程进行求解，推导出了关节动态刚度和阻尼的辨识模型。
A two-step damage identification method of cracked beams is proposed based on the kinetic energy density and the bending spring model.
基于动能密度和弯曲弹簧模型，提出了裂纹梁损伤识别两步法。
The proposed method can accomplish the structure identification and the parameter identification of the fuzzy model in the same time, and implements the on-line identification of the fuzzy model.
该方法利用模糊似然函数对样本数据进行聚类，并使模糊模型的结构辨识和参数辨识能同时完成，从而实现模糊模型的在线辨识。
The submatrix method makes the definition of mistuning parameters more freely and adds the model modification function to this identification method.
采用子矩阵型技术使得失谐参数定义更加的自由，并使得该方法具有模型修正的功能；
The paper based on genetic algorithms proposes a method for identification of bilinear discrete dynamic model parameters.
本文以遗传算法为基础，提出了一种辨识双线性离散动态系统模型参数的方法。
The paper proposes a novel method for the identification of Hammerstein model based on genetic programming.
该文基于遗传规划提出了一种辨识哈默·斯坦模型的新方法。
The paper proposes a novel method for the identification of Hammerstein model based on genetic programming.
该文基于遗传规划提出了一种辨识哈默·斯坦模型的新方法。
应用推荐