The paper USES finite element method to calculate the whole reel structure of a ship lift and presents the mechanical model of finite element analysis for the structure as a whole.
采用有限单元法对升船机卷筒结构进行整体计算，提出了有限元分析的力学模型，对筒壳、幅板的强度及刚度作了全面分析。
Complete finite element analysis is conducted on pile frame of SYR200 rotary pile drill with the model, which provides guiding reference for the design of pile frames.
使用这种模型对SYR200旋挖钻机桩架进行了整体有限元分析，分析对钻孔机桩架的结构设计有指导意义。
Through the comparison of modal shape of floating caliper brake system elements by finite element modal analysis and experiment modal analysis, the validity of finite element model is confirmed.
通过对比浮钳式盘式制动器各零部件的有限元模态分析和试验模态分析所得出的模态阵型，验证了有限元模型的正确性。
By analysis of the middle section stress of the hollow slab in the two situations of consider contact and not consider contact, verified the accuracy of contact finite element model in that situation.
通过考虑接触与不考虑接触两种情况时桥面板跨中截面的受力分析，验证该问题中接触有限元模型的正确性。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
The effects of disuse on trabecular bone structure was simulated, using the bone (re) modeling model with goals of physiological regulation, based on finite element analysis.
本研究将有限元分析与带有调整目标的骨再造方程相结合，模拟废用对松质骨结构的影响。
It is also presented a finite element analytical model suitable for non-linear analysis of HFB flexural members.
采用有限元方法，建立适于冷弯截面受弯构件性能分析的非线性有限元分析模型。
At the same time, the finite element analysis of metallic mirror model is also presented.
同时给出了金属反射镜有限元分析模型。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
First establish finite element model of engine assembly, and provide evidence for the structure modification of engine through mode analysis.
首先建立发动机总成有限元模型，通过模态分析，为发动机的结构修改提供依据。
The method was discussed for how to integrate optimizing and building model with finite element analysis on 3D development and analysis of outer-tooth gear pump through UG design platform.
探讨通过UG设计平台，如何将优化程序、3D模型建立、有限元分析等，有机集成于外啮合齿轮泵齿轮3D设计和分析中去。
In this paper a practicable testing method for frame rigidity is described. The method is aimed at checking the finite element model of frame structure analysis.
为检验车架结构分析的有限元模型，通过一具体车架的刚度试验，总结出一套实用的车架刚度试验方法。
Through an example, experiment and finite element analysis were done, and then the validity of the model and the accuracy of the method are verified.
针对具体实例，进行了有限元分析和实验研究，证实了理论模型的正确性和计算方法的精确性。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
In this paper, a structural-acoustic model of a model tractor cab for finite element analysis was established, and the acoustic modal and the coupled structural-acoustic modal were analyzed.
该文以一拖拉机驾驶室模型为研究对象，建立了其声振耦合的有限元分析模型，计算了该驾驶室模型的声学模态和声振耦合模态。
On the basis of error analysis of finite element modeling, the multi-level model updating is put forward for long-span Bridges.
在有限元模型误差来源分析的基础上，提出了大跨桥梁结构模型误差的分层次修正方法。
And import the model into the finite element analysis software of ANSYS for modal calculation and analysis.
进而将齿轮的参数化模型导入通用有限元分析软件ANSYS，对其模态进行计算分析。
The finite element analysis model of cylinder and vessel head structures was established.
建立了高压容器筒体与封头结构的有限元分析模型。
In this paper, a coupling model of Beam element finite element boundary element Infinite boundary element for the analysis of structure foundation system in frequency domain is established.
采用梁单元、有限元、边界元、无限边界元相结合的方法，建立了频域中结构-半无限地基系统的分析模型。
Reducing the order of a large structural finite element model is important in improving the efficiency of finite element analysis in the field of structural dynamics and vibration.
对大型复杂结构振动有限元模型进行减缩降阶，是使结构有限元模型可有效地用在结构动力分析和振动计算方面的一个重要措施。
Based on the finite element analysis (FEA) model of steel tube scaffold couplers, the corresponding connection of scaffold couplers and pre-load of slide wedge have been discussed.
在建立新型钢管脚手架扣件的有限元分析模型的基础上，对扣件各部件之间的连接以及斜楔的预紧力问题进行了处理。
The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth. A feasible and accurate finite element model is offered.
对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究，并提出了实用而精确的有限元模型。
Objective: To establish a three-dimensional finite element model of normal human hip as a foundation of finite element analysis in this area.
目的：构建正常人体髋关节的三维有限元模型，作为该部位进一步有限元分析的基础。
This paper describes the finite element analysis model, load condition and results of C37-type hopper car body exported to Australia.
介绍了出口澳大利亚c37型漏斗车车体有限元分析模型、载荷工况和结果。
Through simulative analysis of finite element model and mechanical-electric coupled, the natural frequency of stator energy converter and stator's dimensions and their relation were discussed.
通过对有限元模型进行模态分析和机电耦合分析，探讨了定子换能器的固有频率和定子结构尺寸以及两者之间的关系。
The finite element modal analysis of an effective model has been done after building up its analytic model by applying modern CAD techniques.
利用现代CAD技术建立有效的有限元分析模型，并在此基础上对其进行有限元模态分析。
The finite element analysis model of truss structures was established.
建立了桁架结构的有限元分析模型。
The finite element dynamic analysis model of the spindle assembly was developed by taking the advantage of the spring-damper elements to simulate the bearing supports.
在对主轴部件分析模型进行研究的基础上，采用弹簧阻尼单元模拟轴承支承的方法，建立了主轴部件动力学分析有限元模型。
In this paper, a finite element model for the analysis of the pipeline suspension bridge was set up with considering the initial internal force and verticality of the staying cable.
本文建立了悬索管桥分析的有限元模型，并考虑了悬索管桥恒载产生的初始内力、拉索垂度等几何非线性因素。
In this paper, a finite element model for the analysis of the pipeline suspension bridge was set up with considering the initial internal force and verticality of the staying cable.
本文建立了悬索管桥分析的有限元模型，并考虑了悬索管桥恒载产生的初始内力、拉索垂度等几何非线性因素。
应用推荐